FCC BBQ FCC-A-10035 Guide

OUTDOORUSEONLY
FORUSEWITHGASBBQ
!
Sare  u  cookin!
Rotisserie Kit
60-90 CMWITHACMOTOR
INSTRUCTION MANUAL & MAINTENANCE FCC-A-10035

Parts
1. Handle ................1pc 2. Balance Block ... 1 pc. 3. Roller ....................1pc 4. M5 Screw ............ 2pc 5. M5 Washer ........ 2pc.
6. M5 Nut ............... 2pc 7. Spit Rod Bracket .. 1pc 8. Spit Rod Support .. 1pc 9. Extension Rod .... 2pc 10. Rod Socket ..... 2pc
11 Meat Fork ......... 2 pc 12. Spit Rod ........... 1pc 13. Motor Bracket ........ 2pc 14. M6 Nut ............... 2pc 15. M6 Washer ........ 2pc
16. M6 Screw ......... 2pc 17. AC Motor ........... 1pc
USE , CLEANINGANDMAINTENANCE
0 THEROTISSERIEISFOROUTDOORUSEWITHAGASBBQ. USEAGROUNDEDOUTLET.
0 NOTE! MAXWEIGHTUSEDONTHEROTISSERIEIS 12 KG.
0 DONOTLETCHILDRENPYOROPERATETHEROTISSERIE.
0 UNPLUGTHEELECTRICCORDWHENNOTINUSE.
0 STORETHEACMOTORINADRYPCEWHENNOTINUSE.
0 USEASOFTDAMPCLOTHFORCLEANINGTHEMOTORHOUSING. DONOTUSE
CHEMICALSORABRASIVECLEANERS.
0 HANDWASHSPITANDFORKSUSINGMILDDISHDETERGENTANDTHEN
DRYUSINGASOFTCLOTH.
(2 alternatives)
2

1. Fix the motor bracket (13) to the sidewall of the
grill body with M6 nut, washer and screw. Use the
motorbracket that fits your barbecue.
2. Enter the AC motor (17) on the bracket by sliding
the track on the motor onto the bracket from above.
3. Thread the meat forks (11) on the spit (12) and
tighten in desired position. The spit (12) is then
inserted into the square hole on the AC motor(17).
4. Enter the handle (1) on the extension (9), then
the balance block (2) and put on the roller (3) . The
rods are assembled using the rod sockets (10).
5. The food should be centered when put on the
on the rod for roasting. Tighten the screw on the
meat forks when they are pushed into the food
and positioned in the middle of the rod.
6. For smaller food or bigger barbecues, the
spit rod (12) can be used with the spit rod
support (7 & 8). Do NOT assemble the handle (1)
when the end of the rod end up inside the barbecue.
NOTE! Remove the grills warming rack when mounting the rotisserie kit.
Also remove the grilling grid if necesarry to allow enough space for rotation.
Assembly
3

Waste electrical production
should not be disposed of with
household waste.
Please recycle were facilities exist.
Check with your local authority
or retailer for recycling advice.
Consumer Contact
Always attach your receipt when making a warranty claim.
Produced in China for FCCProducts Co., Ltd.
This product is covered by a warranty in accordance with consumer legislation. It has
undergone strict quality controls and testing at the factory.
If there are any parts missing or the product has been damaged, please contact your
dealer or the consumer contact below for help.
Faults due to misuse, lack of maintenance or modification of the product will
invalidate the warranty. Damaged parts not due to a fault with the product will be
invoiced according to our price list + carriage and administration fee.
If new parts are needed or in the event of a warranty claim, please contact your
dealer or consumer contact:
FCCPRODUCTSAS
KJELLERVEST   KJELLER NORWAY
[phone]
[e-mail]
www.fccproducts.no