Fein ASy 630 User manual

SERVICE
Tool service and maintenance must be performed only by qualified
repair personnel.
When servicing a tool, only use identical replacement parts available
from FEIN.
Repairs on FEIN Power Tools required the use of special tools (pulling devices
and bearing press). Authorized repair centers have trained repair technicians
andequipmentnecessarytoper-formtheserepairs.Serviceorrepairsperformed
by unqualified persons could result in operator injury.
For the location of the repair center near you, please call 1-800-441-9878.
Monday thru Friday, 9AM to 5PM EST. Or, look on our web site at
www.feinus.com and follow the link to “AuthorizedWarranty Repair Centers”
Phone: [phone] Fax: [phone] Toll Free: 1-800-441-9878
FEIN Power Tools
1030 Alcon Street
Pittsburgh, PA 15220
July13, 2004
ASy 630
Hand Drill

Fein Power Tools
ASy 630
Item Item Number Description Reqd.
10 3-19-12-020-00-4 MOTORHOUSING-LOWER 1
20 3-19-12-021-00-3 MOTORHOUSING-UPPER 1
30 4-30-46-005-00-1 SCREW 5
40 3-07-01-143-00-7 SWITCH 1
50 3-07-22-149-00-4 CAPACITOR 1
60 3-07-12-061-00-2 BRUSH HOLDER 2
70 3-07-11-087-00-2 CARBON BRUSH 2
80 4-30-41-009-99-2 SCREW 2
90 5-1-251-001-11-3 FIELD COIL 1
105 3-07-07-101-01-2 CABLE 1
110 3-14-13-142-00-9 CABLE PROTECTOR SLEEVE 1
120 3-24-31-021-00-7 CABLE CLAMP 1
130 4-30-46-002-00-5 SCREW 2
140 3-24-19-098-00-4 PLATE 1
150 3-16-01-126-00-4 BEARING BUSH 1
200 5-3-251-002-11-8 ARMATURE 1
220 3-10-04-019-00-0 FAN 1
300 3-15-08-171-00-4 GEAR HOUSING 1
310 3-34-01-081-00-1 DRILL SHAFT 1
320 4-17-01-007-03-8 BALL BEARING 608-RS1 1
330 4-26-16-013-00-1 LOCKING RING 1
340 4-26-16-001-00-5 LOCKING RING 1
350 3-36-57-132-00-3 GEAR 41T 1
550 4-17-01-202-02-4 BALL BEARING 608-RS1 1
560 4-17-01-001-17-2 BALL BEARING 608-RS1 1
570 3-26-12-055-00-8 PACKING RING 1
580 4-30-41-003-04-8 SCREW 2
590 4-30-41-020-04-0 SCREW 2
600 4-24-43-003-04-3 LOCK WASHER 4
610 6-32-04-019-00-3 QUICK-ACTION CHUCK 1