Feit Electric WORK2000XLPLUGFOLD User manual

IMPORTANT SAFETY INSTRUCTIONS
AND INSTALLATION GUIDE
Item #’s: WORK2000XLPLUGFOLD
WORK3000XLPLUGFOLD
WORK5000XLPLUGFOLD
Foldable Work Light
READ BEFORE INSTALLATION
SAVE THESE INSTRUCTIONS
Questions, problems, missing parts? Before returning to the store,
call Feit Electric Customer Service
8 a.m. - 5 p.m., PST, Monday - Friday
We appreciate the trust and confidence you have placed in Feit Electric through the purchase of this Foldable Work Light. We strive to continually create quality products
designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Feit Electric.
1-866-326-BULB (2852)
FEIT.COM

Table of Contents ................................... 2
Safety Information .................................. 2
FCC Statement ...................................... 2
Warranty .......................................... 2
Parts of the Work Light............................... 3
Work Light Positions ................................. 4
How to Operate ..................................... 4
Limited Warranty
Table of Contents
This product is warranted to be free from defects in workmanship and materials for up to 3 years from date of purchase. If the product fails within the warranty period,
please contact Feit Electric at [email protected], visit feit.com/contact-us or call 1-866 326-BULB (2852) for instructions on replacement or refund. REPLACEMENT OR REFUND
IS YOUR SOLE REMEDY. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE DURATION OF THIS
WARRANTY. LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IS HEREBY EXPRESSLY EXCLUDED. Some states and provinces do not allow the exclusion of
incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state or province to province.
2 WWW.FEIT.COM
Please contact 1-866-326-BULB (2852) for further assistance.
Important Safety Information
READ ALL INSTRUCTIONS
SAVE THESE INSTRUCTIONS
WARNING: RISK OFSHOCK. House electric current can
causepainful shock or serious injury unless handled properly.
WARNING: When using outdoor use portable luminaires,
basic safety precautions should always be followed to reduce
the risk of fire, electric shock, and personal injury.
WARNING: Use only three-wire extension cords that have
three-prong grounding plugs and grounding receptacles that
accept the appliance’s plug. Do not use an extension cord near
water or in areas where water may accumulate. Keep away
from pools or spas. Keep plugs dry.
Follow all safe guards stated in the manual, in addition to normal safety precautions in working
with electrical devices. Always follow basic safety precautions to reduce the risk of fire, electric
shock and personal injury.
All Safety and Operating instructions in this manual must be followed before using this product.
To disconnect, turn off the switch, then remove the plug from the outlet.
Do not turn off by pulling on the cord.
•
•
Ground Fault Circuit Interrupter (GFCI) protection is to be provided on the circuit(s) or for the
wet location portable luminaire. Receptacles are available having built-in GFCI protection and
are able to be used for this measure of safety
•
Use only with an extension cord for outdoor use, such as an extension cord of cord type SEW,
SEOW,SEOOW, SOW, SOOW, STW, STOW, STOOW, SJEW, SJEOW, SJEOOW, SJW, SJOW, SJOOW,
SJTW, SJTOW, or SJTOOW.
•
•
To reduce the risk of fire, keep away from combustible materials while in operation.
•
To reduce the risk of injury, close supervision is necessary when this product is used near children.
•
Suitable for Wet Locations
Do NOT contact hot parts.
Do NOT handle this work light or try to plug it in when your hands are wet or damp or when
standing on a wet or damp surface or in water.
Never look directly into light sources or LED chips. An LED is extremely bright and can damage
eyes with prolonged exposure.
•
•
•
•
CAUTION: This portable light-emitting diode (LED) luminaire
has a polarized plug (one blade is wider than the other) as a
feature to reduce the risk of electric shock. This plug will fit in
a polarized outlet only one way. If the plug does not fully fit in
the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. Do not alter the plug.
Maintenance and Care
Maintenance of this work light is very minimal. Regularly clean the lens with a non-abrasive cleaning cloth. The same care should be provided for the stand.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and
found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not
expressly approved by the manufacturer could void the user’s authority to operate the equipment. Feit Electric Company, 4901 Gregg Road, Pico Rivera, CA 90660. www.feit.com, 1-866-326-BULB (2852).
Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Unique Identifier: WORK2000XLPLUGFOLD, WORK3000XLPLUGFOLD & WORK5000XLPLUGFOLD
Responsible Party - U.S Contact Information
FEIT ELECTRIC Co.
4901 GREGG RD. PICO RIVERA, CA, USA 90660-2108
TEL: [phone]-BULB (2852), www.feit.com

3
Parts of the Work Light
WWW.FEIT.COM
Please contact 1-866-326-BULB (2852) for further assistance.
Handle
Switch
Cord Winder
Power Cord
Frame Tripod Bracket
Base
Pivoting Light Head
LEDs
(LED quantity is dependent on the
lumens of the work light.)
Light Head
Adjusting Joint
OI
H
o
t
S
u
r
f
a
c
e

Work Light Positions
4 WWW.FEIT.COM
Please contact 1-866-326-BULB (2852) for further assistance.
1 2
Fig. 1
Fig. 4
Fig. 2 Fig. 3
Unfold the Base from the Frame to the
desired angle (see Fig. 1).
1Compare the illustrations with your unit to familiarize yourself with the location
of the switch and adjustments. Make sure unit is plugged in (see Fig. 4).
Press the switch towards “I” to turn on the work light,
Press the switch towards “o” to turn o the work light.
The angle between the Frame and the Base is
limited to 180 degrees (see Fig. 2). 3The Light Head can rotate 360 degrees (see Fig. 3).
How to Operate
Switch
OI
OI
OI
H
o
t
S
u
r
f
a
c
e
180˚
Base
Base
Hinge
Hinge
Frame
Frame
Light head
360˚
H
o
t
S
u
r
f
a
c
e
NOTE: To lock into the desired position, use the included
hex Allen key on the hinge and turn clockwise.
NOTE: To lock into the desired position, use the included
hex Allen key on the hinge and turn clockwise.