Fellowes AeraMax Pro AM4 PC User manual

AERAMAX®PRO AM4 PC
AM4S PC
Quick
Start
Guide

This guide is for machine set-up. For full installation guidelines and for more detail on the PureView screen,
please refer to the product documentation that came with the unit, or visit http://support.fellowes.com

AeraMax AM4 PC/AM4S PC | 3
Welcome to
Healthy Air

4 | Setting Up
Setting up your air purifier
01
»Open unit fully by pressing latches on both sides.
02
»If locked, insert key and rotate counterclockwise ¼.

3
2
1
4
AeraMax AM4 PC/AM4S PC | 5
03
»Remove bags from lters from both lter chambers.
»Check that the Velcro on the carbon lter is facing out.
Attach pre-lter to the Velcro strips in each corner of the
carbon lter. Complete the same steps for both lter set-ups
within the AM4 unit.
04
»Arrange lters in proper order. HEPA is placed rst in the
frame. Carbon on top of HEPA. Pre-lter on top of Carbon,
attached in all four corners.

6 | Setting Up
05
»Place both assembled lters into the unit – white sticker on
top and white pre-lter in front.
06
»Close front panel until you hear a click.

AeraMax AM4 PC/AM4S PC | 7
Getting started
07
FLOOR UNITS ONLY: Plug into an outlet and ensure the
power switch located at the bottom rear of the unit next to
the power cord is switched to the on position. The unit
will now be in auto-mode.
08
»Once the oor or wall unit is powered up, open front panel
to adjust settings.

8 | Getting Started
11
OPTIONAL QUIET MODE: Press and hold EnviroSmart Icon
until it beeps.
09
»Ionizer will be o by default. Turn the ionizer on by pressing
and holding the ionizer icon until it is illuminated.
10
»Unit is defaulted to EnviroSmart Auto-mode; icon will be
lit blue.
12
»EnviroSmart icon will change to purple. Unit is now in
quiet mode.

AeraMax AM4 PC/AM4S PC | 9
13
MANUAL MODE: Press and hold fan icon until it beeps.
15
»Once settings are complete, close front panel, insert key on
the right side and rotate clockwise ¼ turn to lock machine.
14
»You can now manually put the unit in 1-5 fan speeds by
repeatedly pressing and holding the fan icon. The light bar
to the right indicates which fan speed you are using (1-5).

10 | Setting Up