
PRODUCT MAINTENANCE
LIMITED PRODUCT WARRANTY
Continuous operation: 
Upto5minutesmaximum
NOTE: Shredder runs briefly 
after each pass to clear entry. 
Continuous operation beyond 
5 minutes will trigger a 
30-minute cool down period.
BASIC SHREDDING OPERATION
*Only use a non-aerosol vegetable oil in long nozzle container such as Fellowes 35250
Allcross-cutshreddersrequireoilforpeak
performance. If not oiled, a machine may 
experience diminished sheet capacity, intrusive 
noise when shredding and could ultimately 
stoprunning.Toavoidtheseproblems,we
recommend you oil your shredder each time 
you empty your waste bin.
OILING SHREDDER 
FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE
Set to Reverse ( )
 
 
for 2-3 seconds
*Apply oil 
across entry 
Set to Off ( )
Limited Warranty: Fellowes, Inc. (“Fellowes”) warrants the parts of the machine to be free of 
defects in material and workmanship and provides service and support for 2 years from the date of 
purchase by the original consumer. Fellowes warrants the cutting blades of the machine to be free 
from defects in material and workmanship for 3 years from the date of purchase by the original 
consumer. If any part is found to be defective during the warranty period, your sole and exclusive 
remedywillberepairorreplacement,atFellowes’optionandexpense,ofthedefectivepart.This
warranty does not apply in cases of abuse, mishandling, failure to comply with product usage 
standards, shredder operation using an improper power supply (other than listed on the label), or 
unauthorized repair. Fellowes reserves the right to charge the consumers for any additional costs 
incurred by Fellowes to provide parts or services outside of the country where the shredder is initially 
soldbyanauthorizedreseller.ANYIMPLIEDWARRANTY,INCLUDINGTHATOFMERCHANTABILITY
ORFITNESSFORAPARTICULARPURPOSE,ISHEREBYLIMITEDINDURATIONTOTHEAPPROPRIATE
WARRANTYPERIODSETFORTHABOVE.InnoeventshallFellowesbeliableforanyconsequential
orincidentaldamagesattributabletothisproduct.Thiswarrantygivesyouspecificlegalrights.
Theduration,terms,andconditionsofthiswarrantyarevalidworldwide,exceptwheredifferent
limitations,restrictions,orconditionsmayberequiredbylocallaw.Formoredetailsortoobtain
service under this warranty, please contact us or your dealer.
PAPER/CARD 
Safety Lock prevents accidental operation. 
Toset,waitforshreddingtostop,pushblackbuttondownandslidetowardsfrontofshredder.
Tounlockpushblackbuttondownandslidetowardbackofshredder.Forgreatersafety,alwaysunplugshredderafteruse.
Gently pull uncut 
paper from paper 
entry. Plug in.
Set to Reverse 
( )
 for 2-3 
seconds
PAPER JAM
Alternate slowly back and forth Set to Off ( ) 
and unplug
TROUBLESHOOTING
 Overheat Indicator: When the Overheat Indicator is illuminated, the shredder has exceeded its maximum operating temperature 
andneedstocooldown.Thisindicatorwillremainilluminatedandtheshredderwillnotoperateforthedurationoftherecovery
time. See Basic Shredding Operation for more information about the continuous operation and recovery time for this shredder.
21 3
51 3
Plug in and put 
disconnect power 
switch in ON (I) position
1
Set to Auto-On ( ) Feed paper/card 
straight into paper 
entry and release
2 3 4
2
Set to Auto-On ( ) 
and resume shredding
4 6
Australia Residents Only:
OurgoodscomewithguaranteesthatcannotbeexcludedundertheAustralianConsumerLaw.Youareentitledtoareplacementorrefundforamajorfailureandforcompensationforanyother
reasonablyforeseeablelossordamage.Youarealsoentitledtohavethegoodsrepairedorreplacedifthegoodsfailtobeofacceptablequalityandthefailuredoesnotamounttoamajorfailure.The
benefits under Fellowes’ Warranty are in addition to other rights and remedies under a law in relation to the shredder.
When finished shredding 
set to OFF ( )