Fender MUSTANG LT40S User manual

QUICK START GUIDE

TAP BUTTON
Sets tempo on delay effects
(press and hold for TUNER)
BACK BUTTON
Returns to previous screen
SAVE BUTTON
Saves preset changes
MENU BUTTON
Accesses additional options
AUX SAVE
BACK
MENU
TAP
ENCODER
TURN to navigate
PUSH to edit
UTILITY
BUTTONS
PRESS to access
additional features
GAIN MASTER USBBASSVOLUME
INPUT
DISPLAY
TREBLE
FTSW
TOP CONTROL PANELTOP CONTROL PANEL

4.0
5.7
6.0
6.0
VOLUME
GAIN
TREBLE
BASS
TWIN CLEAN
5.5MIDDLE
01
FENDER
CLEAN
01 FENDER C...
AMPLIFIER
STOMP
DELAY
MOD
REV
TWIN CLEAN 5.7VOLUME
4.0GAIN
6.0TREBLE
6.0BASS
TWIN CLEAN
5.5MIDDLE
PRESET TITLE
SCREEN
Appears when scrolling through
presets on the top level.
PRESET EDITING
SCREEN
For selecting contents of
a preset to be edited.
PARAMETER
SCREEN
For editing preset
contents.
A preset is a custom grouping of an amplifier (with specific control settings) and optional effects (including effect types and specific control
settings for those effects). Mustang LT40S comes with 60 custom presets (30 pre-loaded; 30 empty), in which the amplifier type can be
changed and effects from four categories can be added, modified or removed. Three basic screens guide the user in navigating a preset.
Advance to the next screen by pressing the ENCODER.
PRESS
ENCODER PRESS ENCODER
USING PRESETSUSING PRESETS

01
FENDER
CLEAN
01 FENDER C...
AMPLIFIER
STOMP
DELAY
MOD
REV
TWIN CLEAN
PRESS
When PRESET TITLE SCREEN is shown in DISPLAY,
turn ENCODER to scroll through presets.
Press ENCODER to access preset contents; PRESET
EDITING SCREEN will appear in DISPLAY.
TURN
ACCESSING PRESETSACCESSING PRESETS

4.0
5.7
6.0
6.0
VOLUME
GAIN
TREBLE
BASS
TWIN CLEAN
5.5MIDDLE
01 FENDER C...
AMPLIFIER
STOMP
DELAY
MOD
REV
TWIN CLEAN 5.7VOLUME
4.0GAIN
6.0TREBLE
6.0BASS
TWIN CLEAN
5.5MIDDLE
PRESS TURN
Select AMPLIFIER option in PRESET EDITING SCREEN;
press ENCODER to access amplifier options menu.
Amp type is first item listed in PARAMETER SCREEN;
press and turn ENCODER to change amp type.
CHANGING AMP TYPECHANGING AMP TYPE

4.0
5.7
6.0
6.0
VOLUME
GAIN
TREBLE
BASS
5.5MIDDLE
TWIN CLEAN
5.7VOLUME
4.0GAIN
6.0TREBLE
6.0BASS
TWIN CLEAN
5.5MIDDLE
NOTE: MASTER volume setting is not stored by preset.
TURN
NOTE: VOLUME control in PARAMETER SCREEN is used to set
individual preset volume; changes are kept when saving preset.
Select control to be edited; press ENCODER to highlight setting.
Turn ENCODER to change setting to desired value; press
ENCODER again to exit editing mode for that control.
Use physical knobs on top control panel to set levels for amp controls
only (physical control knobs do not modify effects control parameters).
OR
GAIN TREBLEVOLUME BASS
EDITING AMP CONTROLSEDITING AMP CONTROLS

01 FENDER C...
AMPLIFIER
STOMP
DELAY
MOD
REV
TWIN CLEAN
NONE
PRESS TURN
In PRESET EDITING SCREEN, solid effects borders indicate
active effects categories; dashed borders indicate empty effects
categories. To add effect, turn ENCODER to highlight desired
effect category; press ENCODER to enter effect.
Effect type will read NONE if no effect is present; turn and press
ENCODER to select and add new effect. To remove effect,
press ENCODER on effect type at top of DISPLAY; turn
ENCODER until effect type reads NONE.
ADDING/REMOVING EFFECTSADDING/REMOVING EFFECTS

01 FENDER C...
AMPLIFIER
STOMP
DELAY
MOD
REV
TWIN CLEAN
5.5
4.5
10.0
DECAY
LEVEL
TONE
SPRING 65
TURN
Use ENCODER to select desired effects category in PRESET
EDITING SCREEN; press ENCODER to access effect types
and settings in that category.
Effect name is listed at top of PARAMETER SCREEN; press and turn
ENCODER to change effects within that category (STOMP, MOD,
DELAY or REVERB). Within an effect, turn and press ENCODER to
access and set various effect control parameters.
PRESS
CHANGING EFFECT TYPES/SETTINGSCHANGING EFFECT TYPES/SETTINGS

TUNER
A
6.2
512.0ms
4.1
TIME
LEVEL
FEEDBACK
3.7TONE
DELAY
For DELAY effects, LED by TAP utility button flashes in time
with delay rate. To set new delay rate, use ENCODER to scroll
to and select new delay time value, or press TAP utility button
at least twice at desired delay rate.
Press and hold TAP utility button to access built-in TUNER.
USING TAP BUTTONUSING TAP BUTTON

01
FENDER
CLEAN
SAVE
REPLACE
SAVE AS
F E N D E R _ _
L E A N _ _ _
C
SAVE
CLEAR ALL
SAVE AS
NOTE: If a preset is not saved, it will revert to its previous settings when returning to it after
leaving the preset, or when turning the amplifier off and back on again.
Press SAVE utility button; use ENCODER to scroll to and
select SAVE to save preset in current position.
Use ENCODER to scroll to and select SAVE AS to choose a new
preset position, overwrite an existing preset position or enter a
new name for current preset. Scroll to and select REPLACE to
load one of 30 factory presets into current preset position.
OR
SAVING PRESETSSAVING PRESETS