
Safety Information
• Use the FD25P machine for recomended uses only. Any
deviation may cause injury or damage to personal property.
• Wear ANSI-approved safety goggles and safety garments.
• Keep ngers away from the crimping head when engaging
the crimping mechanism.
• Never attempt to crimp wires that are plugged into an outlet
or are electrically charged.
• Refer to the wire manufacturer’s instruction manual for
specic crimping instructions prior to using this product.
• Keep work area clean and well lit.
• Maintain proper footing and balance at all times. This ensures
better control during setup and operation.
• Keep bystanders out of your work area while using the FD25P.
• Do not operate when tired or under the inuence of alcohol
and intoxicants.
• The FD25P is not a toy, if discretion is not used it may lead to
personal injury or damage of property.
• Inspect before use, do not operate if any parts are missing or
damaged.
• Maintain product labels and name plates. These carry
important information, If unreadable or missing contact
Ferrules Direct.
• Check that all bolts and screws are properly tightened once
every few months, if not engage in proper maintenance.