Fetch Mighty User manual

Quick Start Guide

2
What’s inside
Step 1. Unpack the box
Important Tips
Step 2. Connect to your Broadband Modem
Step 3 . Connect to your TV Antenna
Step 4. Connect to your TV
Step 5. Power up your Fetch Mighty
Step 6. Start up your Fetch Mighty
Fetch Mobile App
Remote Control
Fetch Mighty
Troubleshooting
Specifications
4
5
6
10
11
12
13
14
15
16
18
20

3
All your entertainment
in one place
Welcome to Fetch – an exciting new television experience that brings you the best
TV, latest movies and popular applications all together in one easy place.
It’s Fetch and it’s ready when you are.
There are 6 easy steps to get you started:
1. Unpack the box
2. Connect the Fetch to your broadband modem
3. Connect the Fetch to your TV Antenna
4. Connect the Fetch to your TV
5. Power up your Fetch Mighty
6. Start up your Fetch Mighty
This guide tells you all you need to know about setting up and
turning on your Fetch Mighty. It also has important safety and
usage information.

4
Unpack the box
Before you install your Fetch Mighty, check that all the
accessories you need have been supplied using this page as a
checklist.
You may also have received:
Power Line Adapters.
You need these to get the signal from your modem to your
Fetch Mighty if your Wi-Fi connection is not great.
You will need:
1 HDMI Cable
1 Remote Control
2 Batteries
1 Fetch Mighty 1 Power Supply
1 RJ45 Ethernet Cable

5
• Activate your first box by going to www.fetchtv.com.au/activate. To activate
additional boxes go to www.fetchtv.com.au/account and add the additional
boxes to your account.
• Place the Fetch on a level surface.
• Don’t stack it on anything that vibrates or generates heat.
• Make sure there’s 5cm of space around the Fetch box for airflow.
• The remote control works up to 6m away from the Fetch box.
• Unplug the Fetch box from the power source before cleaning.
• Clean using a dry cloth only - don’t use water or chemicals.
• Don’t try to open the Fetch box - it’s dangerous and will void your warranty.
• Use only with a 100V-240V 50Hz AC power source.
• Use only the power supply provided.
• Keep liquid, children and pets away from the Fetch box at all times.
• Refer any problems with your Fetch by going to www.fetchtv.com.au/account
Important Tips

6
To connect, follow these steps:
1. Plug one end of an Ethernet cable into a free port on your
broadband modem.
2. Plug the other end into the port labelled INTERNET on the
back of your Fetch Mighty.
Connect to your
Broadband Modem
Fetch is delivered by broadband Internet, so you need to connect your
Fetch Mighty to the modem. There are various ways to do this:
Option 1 Option 2
Connect your Modem to your Fetch Mighty via Wi-Fi
Use this option if:
• Your modem is not close to your TV, and
• You have reliable Wi-Fi in the room where your TV is.
If you’re using this connection option you can go straight to Step
3 on Page 10 now. You will set your Wi-Fi up later when you get
to Step 6.
Connect your Modem to your Fetch Mighty via Ethernet cable
This is the most reliable connection option. Use this option if:
• You can run an Ethernet cable directly from your Modem to
your Fetch Mighty.

7
Some more information on Power Line Adapters
• Only use Power Line Adapter units on the same electrical
circuit. Most homes have one circuit for lighting and another
for electrical outlets, but large homes may have two circuits
for electrical outlets.
• Power Line Adapters should be plugged directly into the wall
outlet.
• Each Power Line Adapter needs at least 5cm below the
power outlet to plug in the Ethernet cable so won’t suit very
low mounted wall outlets.
• Plugging Power Line Adapters into a double adapter or a
power board isn’t recommended as these can prevent the
Power Line Adapters from connecting and working properly,
and affect the speed and quality of your Fetch service.
• If you have to use an adapter/power board, because there
is no other wall outlet available, make sure that: the double
adapter/power board does not have surge protectors or
noise filtering, and the Power Line Adapter is plugged into
the first outlet (the one nearest the cord) on the double
adapter/power board.
• In some houses, the configuration of the wiring in the
house may mean the Power Line Adapters can’t establish
a connection due to multiple circuits or 3-phase power
configurations.
1. Plug one Power Line Adapter into an electrical socket near your
broadband modem.
2. Plug one end of an Internet Ethernet cable into the port on the
Power Line Adapter unit.
3. Plug the other end into a free port on your broadband modem.
4. Plug the other Power Line Adapter into an electrical socket near
your TV and your Fetch Mighty.
5. Plug one end of an Internet Ethernet cable into the port on the
Power Line Adapter unit.
6. Plug the other end into the port labelled INTERNET on the
back of your Fetch Mighty.
Connect your Modem to your Fetch Mighty with Power Line Adapters
Use this option if:
• Your modem is not close to your TV, and
• Your Wi-Fi is not reliable in the room where your TV is.
Power Line Adapters (called PLA devices) transmit the signal from your modem to your Fetch Mighty box using
the power cables inside your walls. You can purchase them from any Fetch retailer.
Option 3
Room 1
Outside
Broadband
Connection
Fetch
Signal Fetch
Signal
TV Aerial
AV
Cable
Normal
Broadband
Use
Broadband
Modem
Room 2
PLA Device

8
To connect, follow these steps:
1. Plug one end of an Internet Ethernet cable into a free port on your broadband modem.
2. Plug the other end into the Internet Ethernet wall socket nearest to your broadband modem.
3. Plug one end of a second Internet Ethernet cable into the port labelled INTERNET on the back of your Fetch Mighty.
4. Plug the other end into the Internet Ethernet wall socket nearest your TV and Fetch Mighty.
Connect your Modem to your Fetch Mighty using data cabling
Use this option if:
• Your modem is not close to your TV, and
• Your installation location has cabling with an Ethernet port nearby.
Option 4

9
Option 5
To connect, follow these steps:
1. Plug one end of an Internet Ethernet cable into the port on the Wireless Bridge near your broadband modem.
2. Plug the other end into a free port on your broadband modem.
3. Plug one end of an Internet Ethernet cable into the port on the Wireless Bridge located near your Fetch Mighty.
4. Plug the other end into the port labelled INTERNET on the back of your Fetch Mighty.
Connect your Modem to Fetch Mighty by Wireless Bridge
Use this option if you prefer to use a Wireless Bridge. Install the Wireless
Bridge using the instructions supplied with it. Put one device near your
broadband modem and the other near your Fetch Mighty.
Room 1Outside Room 2
Broadband
Connectio
n
Fetch Signal
Fetch
Signal
Broadband
Modem
Normal
Broadband
Use
TV Aerial
AV
Cable
Wireless
Bridge

10
Connect to your TV Antenna
You get your Free-to-Air Digital TV channels using your normal TV antenna. They
are not delivered over broadband Internet.
You’ll need your existing TV antenna cable, so unplug it from the back of your TV.
1. Plug one end of the existing antenna cable into the
antenna wall socket, or leave if already connected to
the wall.
2. Plug the other end of the antenna cable into the socket
labelled ANTENNA on the back of your Fetch Mighty.