FiberHome CiTRANS 650 U3 Technical specifications

CiTRANS 650 U3CiTRANS 650 U3
Smart Packet Transport NetworkSmart Packet Transport Network
Product DescriptionProduct Description
Version: A/1Version: A/1
Code: Code: MN0000029MN00000293636
FiberHome TelecFiberHome Telecommunication Technolommunication Technologies ogies Co., Co., Ltd.Ltd.
June 2016June 2016

Thank you Thank you for choosing our for choosing our produproducts.cts.
We appreciate your business. Your satisfaction is our goal.
We will provide you with comprehensive technical support
and after-sales service. Please contact your local sales
representative, service representative or distributor for any
help needed at the contact information shown below.
Fiberhome Telecommunication Technologies Co., Ltd.Fiberhome Telecommunication Technologies Co., Ltd.
Address: No. 67, Guanggu Chuangye Jie, Wuhan, Hubei, China
Zip code: 430073
Tel: [phone] (for Malaysia)
[phone] (for South Asia)
[phone] (for South America)
Fax: [phone]
Website: http://www.fiberhomegroup.com

Legal NoticeLegal Notice
are are trademtrademarks arks of of FiberHFiberHome ome TTelecomelecommunicamunication tion TTechnoloechnologies gies Co.,Co., Ltd.Ltd.
(Hereinafter referred to as FiberHome)(Hereinafter referred to as FiberHome)
All brand names and product names used in this document are used for All brand names and product names used in this document are used for
identification purposes only and are trademarks or registered trademarksidentification purposes only and are trademarks or registered trademarks
of their respective holders.of their respective holders.
All rights reservedAll rights reserved
No No papart rt of of ththis is dodocucumement nt (i(incncludluding ing ththe e elelecectrtrononic ic veversrsionion) ) mamay y bebe
rereprprododucuced ed or or trtranansmsmititteted d in in anany y foform rm or or by by anany y memeanans s witwithohout ut prprioior r
written permission from FiberHome.written permission from FiberHome.
Information in this document is subject to change without notice.Information in this document is subject to change without notice.

PrefacePreface
Related DocumentationRelated Documentation
DocumentDocument Description Description
CiTRANS 650 U3 Smart Packet
Transport Network Product
Description Introduces the product’s functions and features, protection
mechanism, network applications, and technical
specifications.
CiTRANS 650 U3 Smart Packet
Transport Network Hardware
Description Describes the equipment ’s structures, functions,
specifications, and technical parameters in terms of its
hardware components (i.e. the cabinet, the subrack, cards,
and cables).
CiTRANS 650 U3 Smart Packet
Transport Network Quick
Installation Guide Briefs how to install the CiTRANS 650 U3 equipment,
connect and lay out its wires and cables.
CiTRANS 650 U3 Smart Packet
Transport Network Configuration
Guide Describes the rules and methods for configuring various
services and functions of the equipment in the OTNM2000,
and lists typical configuration examples and operation
procedures.
CiTRANS 650 U3 Smart Packet
Transport Network Routine
Maintenance Gives a detailed description of items and procedures of
routine maintenance on a daily, weekly, monthly, quarterly
and yearly basis.
CiTRANS 650 U3 Smart Packet
Transport Network
Troubleshooting Guide Gives a detailed introduction to notices of fault
management, fault isolating methods as well as procedures
and methods of fault management.
CiTRANS 650 U3 Smart Packet
Transport Network Alarm and
Performance Reference Describes levels and classification of alarms and
performance events; lists definitions, causes and
processing methods of all alarms and performance events.
e-Fim OTNM2000 Element
Management System Manual
Set Includes four manuals, i.e., product description, operation
guide, routine maintenance and installation guide, all of
which are aimed at introducing common and fundamental
contents of the OTNM2000 for a better understanding and
proficient use of the network management system.
PDP250B User Guide Introduces the functions of the PDP (3000073); briefs how
to install the PDP, connect and lay out its wires and cables.I

DocumentDocument Description Description
PDP296B User Guide Introduces the functions of the PDP (3000068); briefs how
to install the PDP, connect and lay out its wires and cables.
PDP850A User Guide Introduces the functions of the PDP (3000064); briefs how
to install the PDP, connect and lay out its wires and cables.
II

VersionVersion
VVeerrssiioon n DDeessccrriippttiioonn
A Initial version.
Intended ReadersIntended Readers
This manual is intended for the following readers:
u Planning and designing engineers
u Commissioning engineers
u Operation and maintenance engineers
To utilize this manual, these prerequisite skills are necessary:
u Router related technology
u Data communication technology
u Ethernet technology
III

ConventionsConventions
Terminology ConventionsTerminology Conventions
TerminologyTerminology Convention Convention
CiTRANS 650 U3 FiberHome CiTRANS 650 U3 Equipment
OTNM2000 FiberHome e-Fim OTNM2000 Element Management
System
SNCV1 Control Switch Unit of the CiTRANS 650 U3
XSV1 1-port 10GE Interface Card
XSV2 2-ports 10GE Interface Card
MSV1 8-ports GE/FE Interface Optical Card
GSV4 8-ports GE/FE Interface Electric Card
GSV3 8-ports GE Optical Interface Card
ESV2 8-ports FE Optical Interface Card
E1V1 32 Port E1 Line Card with CES
S1V1 4 STM-1 Optical Interface Card
PWR Power Card
FAN Fan Unit
Symbol Symbol ConventionConventionss
SSyymmbbool l MMeeaanniinng g DDeessccrriippttiioonn
Note Important features or operation guide.
Caution Possible injury to persons or systems, or cause traffic
interruption or loss.
Warning May cause severe bodily injuries.
➔ Jump Jumps to another step.
→Cascading
menu Connects multiple-level menu options.
↔Bidirectional
service The service signal is bidirectional.
→Unidirectional
service The service signal is unidirectional.
IV

ContentsContents
Preface...................................................................................................................I
Related Documentation ...................................................................................I
Version..........................................................................................................III
Intended Readers..........................................................................................III
Conventions.................................................................................................IV
1 Overview ........................................................................................................1
1.1 Product Introduction..........................................................................2
1.2 Product Positioning...........................................................................2
1.3 Network Application..........................................................................3
2 Function .........................................................................................................4
2.1 Unified Cross-connect Capability ......................................................5
2.2 Service Type and Access Capability..................................................5
2.2.1 Service Type.......................................................................5
2.2.2 Access Capability ...............................................................5
2.3 Protection Capability.........................................................................6
2.3.1 Equipment-level Protection .................................................6
2.3.2 Network-level Protection .....................................................7
2.3.3 Network Management Information Protection ......................9
2.4 Carrier-Class Network Management..................................................9
2.4.1 Support of Centralized Configuration Management............10
2.4.2 Support of Performance and Alarm Management ..............10
2.4.3 DCN Construction............................................................. 11
3 Product Feature............................................................................................13
3.1 OAM Feature..................................................................................14
3.1.1 Introduction to OAM..........................................................14
3.1.2 MPLS-TP OAM Mechanism ..............................................16
3.1.3 MPLS-TP OAM Function Signaling ...................................16
3.2 QoS Feature..................... ..............................................................19

3.2.1 QoS Overview ..................................................................19
3.2.2 QoS Capability..................................................................19
3.2.3 QoS Mechanism...............................................................21
3.3 Clock Feature.................................................................................22
3.3.1 Clock Signal Synchronization............................................22
3.3.2 Clock and Time Synchronization Technology.....................23
3.3.3 Time Signal Synchronization Capability.............................31
3.4 Easy Maintenance..........................................................................32
3.4.1 Remote Software Upgrade of Cards..................................32
3.4.2 Automatic Identification of Cards via the EMS....................33
3.4.3 Automatic Storage of Card Operation and Fault Message..33
3.4.4 Automatic Discovery of NEs..............................................33
3.4.5 Prompt of Power Failure....................................................33
3.5 Feature of Energy Saving And Emission Reduction.........................34
3.6 Intelligent Fan Feature ....................................................................35
4 Product Structure..........................................................................................36
4.1 Logical Structure.............................................................................37
4.2 Hardware Structure.........................................................................39
4.2.1 Introduction to Cabinet......................................................39
4.2.2 Equipment Layout.............................................................43
4.2.3 PDP Used by the CiTRANS 650 U3..................................43
4.2.4 CiTRANS 650 U3 Subrack................................................45
4.2.5 Card Classification and Corresponding Slot.......................47
4.2.6 Positioning of Cards in the System....................................48
4.3 Software Architecture......................................................................49
4.3.1 Overview ..........................................................................50
4.3.2 Communication Protocol and Interface..............................50
4.3.3 EMU Software ..................................................................51
4.3.4 Network Management Software ........................................52
5 Service Application.......................................................................................54
5.1 Ethernet Service.............................................................................55
5.1.1 Service Type.....................................................................55
5.1.2 Service Example...............................................................55
5.1.3 Application Scenario.........................................................58

5.2 CES Service...................................................................................61
5.2.1 Emulation Mode................................................................61
5.2.2 Service Clock ...................................................................61
5.2.3 Application Scenario.........................................................64
5.3 Coarse-grained Private Line Service ...............................................64
5.4 Base Station GE / FE Service Bearing.............................................65
6 Protection Implementation ............................................................................67
6.1 Equipment-Level Protection............................................................68
6.1.1 1+1 Protection for the Core Switch and Cross-connect
Card.................................................................................68
6.1.2 1+1 Protection for the Power Card.....................................69
6.1.3 TPS 1:1 Protection for the E1 Card....................................69
6.2 Network-level Protection.................................................................70
6.2.1 LSP 1:1 Protection............................................................70
6.2.2 PW APS Protection...................... .....................................72
6.2.3 Ethernet LAG Protection...................................................74
6.3 Network Management Information Protection ..................................75
7 Security Management...................................................................................79
7.1 Access Control ...............................................................................80
7.2 User Level and Permission Management ........................................80
7.3 Data Security.................... ..............................................................82
7.4 Log Management............................................................................82
8 Technical Specifications................................................................................83
8.1 System Performance Specifications................................................84
8.2 Subrack Specifications....................................................................84
8.3 Card Specifications.........................................................................84
8.3.1 Dimensions, Weight, Power Consumption and Slot of
Cards ...............................................................................85
8.3.2 Specifications of the XSV1 / XSV2 Card............................85
8.3.3 Specifications of the MSV1/GSV3/ESV2 Card...................86
8.3.4 Specifications of the GSV4 Card .......................................87
8.3.5 Specifications of the E1V1 Card........................................87
8.3.6 Specifications of the S1V1 Card........................................88

8.4 Applicable Standard........................................................................89
8.4.1 International Standards.....................................................89
8.4.2 Safety Standards of Laser.................................................93
8.4.3 Relevant Safety Standards................................................94
8.4.4 Relevant EMC Standards..................................................94
8.4.5 Relevant Environment Standards......................................95
8.4.6 Grounding Standards........................................................97
8.4.7 Noise Standards...............................................................97
8.4.8 Fire Prevention Standards.................................................97
8.4.9 Relevant Packaging Standards.........................................98
8.5 Environmental Requirement............................................................98
8.5.1 Operating Environment.....................................................99
8.5.2 Storage Environment......................................................102
8.5.3 Transport Environment....................................................104
Appendix A Abbreviations..........................................................................107

11 Overview Overview
The following is intended to introduce the product from the following aspects.
Product Introduction
Product Positioning
Network Application
Version: A/1 1

CiTRANS 650 U3 Smart Packet Transport Network Product Description
1.11.1 Product Product IntroductionIntroduction
CiTRANS 650 U3, the compact MPLS-TP equipment, is designed and developed to
meet the requirements of a variety of flexible transmission at access layer. Using the
unified Packet switching platform, the product supports multi-service access and
unified switching. The product supports stacking of multiple devices, so as to
facilitate extension of accessed service. The CiTRANS 650 U3 features guaranteed
QoS mechanism, carrier-class reliability, a complete set of service processing
capabilities, convenient and flexible service configuration and management, and
high-precision time synchronization, meeting the requirements of data services and
wireless access network services for the network equipment.
Taking the unified switching as the core, the CiTRANS 650 U3 provides access of
services such as Ethernet and TDM services, meeting full-service access
requirements of operators.
Compatible with MPLS-TP technology, the CiTRANS 650 U3 is aiming at carrying
comprehensive services. It is mainly located on the small or large scale access and
convergence nodes of the MAN.
The appearance of the product is as shown below.
Figure 1-1 Appearance of the CiTRANS 650 U3
1.21.2 Product Product PositioningPositioning
The CiTRANS 650 U3 is mainly located at the small- or large-scale access and
convergence nodes of the MAN, meeting full-service access requirements of
operators.
2 Version: A/1

1 Overview
The CiTRANS 650 U3 integrates packet processing and TDM processing
capabilities, and provides interfaces for multiple services including Ethernet and
TDM services. It can be applied in many scenarios such as IP-based RAN
transmission and fixed bandwidth data convergence and transmission. It provides
abundant service types and impeccable service management mechanism for fixed
network users, commercial network users, and mobile network users. It is applicable
to the access layer of MANs and LANs.
1.31.3 Network Network ApplicationApplication
Figure 1-2 shows the networking scenario of the CiTRANS 650 U3 which serves as
the platform for bearing multiple services.
Figure 1-2 Network Scenario of the CiTRANS 650 U3
Version: A/1 3

22 Function Function
As a carrier-class transmission equipment, the CiTRANS 650 U3 supports multiple
service types and provides a wide variety of functions to ensure service
transmission quality and efficiency. The main functions of the CiTRANS 650 U3 are
described as follows.
Unified Cross-connect Capability
Service Type and Access Capability
Protection Capability
Carrier-Class Network Management
4 Version: A/1

2 Function
2.12.1 Unified Unified Cross-connect Cross-connect CapabilityCapability
The CiTRANS 650 U3 takes the unified switching as the core and has a cross-
connect grooming capability as shown in Table 2-1.
Table 2-1 Cross-connect Grooming Capability
Product CodeProduct Code Code of Core Switch &Code of Core Switch &
Cross-connect CardCross-connect Card Cross-connect CapacityCross-connect Capacity
CiTRANS 650 U3 SNCV1 Packet: 100G / 160G
2.22.2 Service Service TType ype and and Access Access CapabilityCapability
The following introduces the service types and access capability of the CiTRANS
650 U3.
2.2.12.2.1 Service Service TTypeype
See Table 2-2 for the service types supported by the CiTRANS 650 U3.
Table 2-2 Applicable Service Types
SeServrvicice e CaCatetegogory ry SeServrvicice e TTypypee Reference Reference StandardStandard
Ethernet service FE IEEE 802.3z IEEE 802.3u
IEEE 802.3ae
GE
10GE LAN / WAN
TDM service E1 ITU-T G.703
ITU-T G.783
ITU-T G.823
ITU-T G.824
STM-1 ITU-T G.707 ITU-T G.691
ITU-T G.957
2.2.22.2.2 Access Access CapabilityCapability
See Table 2-3 for types and access capabilities of various services supported by
the CiTRANS 650 U3.
Version: A/1 5

CiTRANS 650 U3 Smart Packet Transport Network Product Description
Table 2-3 Access Capability
ServiceService
CategoryCategory Service TypeService Type Card Card NameName Accessed LineAccessed Line
QuantityQuantity Interface TypeInterface Type
Ethernet
service 10GE XSV1 1 Optical interface
XSV2 2 Optical interface
GE/FE hybrid GSV4 8 Electrical
interface
MSV1 8 Optical interface
GSV3 8 Optical interface
ESV2 8 Optical interface
CES service E1 E1V1 32 Electrical
interface
STM-1 S1V1 4 Optical interface
2.32.3 Protection Protection CapabilityCapability
The CiTRANS 650 U3 provides equipment-level protection, network-level protection
and network management information protection.
2.3.12.3.1 Equipment-Equipment-level level ProtectionProtection
The CiTRANS 650 U3 provides abundant equipment-level protections, as shown in
Table 2-4.
Table 2-4 Equipment-level Protection
Protection ObjectProtection Object Protection Protection ModeMode
Core switch and cross-connect card 1+1 hot standby
Power card 1+1 hot standby
Fan unit Hot standby
E1 card TPS 1:1 protection
6 Version: A/1