FiberHome AN6000-17 Guide

AN6000-17
Optical Line Terminal Equipment
Hardware Description
Version: A
Code: MN000003536
FiberHome Telecommunication Technologies Co., Ltd.
December 2018

Thank you for choosing our products.
We appreciate your business. Your satisfaction is our goal.
We will provide you with comprehensive technical support
and after-sales service. Please contact your local sales
representative, service representative or distributor for any
help needed at the contact information shown below.
Fiberhome Telecommunication Technologies Co., Ltd.
Address: No. 67, Guanggu Chuangye Jie, Wuhan, Hubei, China
Zip code: 430073
Tel: [phone] (for Malaysia)
[phone] (for South Asia)
[phone] (for South America)
Fax: [phone]
Website: http://www.fiberhomegroup.com

Legal Notice
are trademarks of FiberHome Telecommunication Technologies Co., Ltd.
(Hereinafter referred to as FiberHome)
All brand names and product names used in this document are used for
identification purposes only and are trademarks or registered trademarks
of their respective holders.
All rights reserved
No part of this document (including the electronic version) may be
reproduced or transmitted in any form or by any means without prior
written permission from FiberHome.
Information in this document is subject to change without notice.

Contents
1Documentation Guide .....................................................................................1
2Subrack..........................................................................................................3
2.1 Subrack Model and Specifications.....................................................4
2.2 Subrack Structure.............................................................................5
2.3 Fan Unit............................................................................................6
2.4 Slot Distribution and Cards Supported...............................................8
3Cards .............................................................................................................9
3.1 Card Structure ................................................................................10
3.2 Card Overview................................................................................11
3.3 Core Switch Card............................................................................12
3.3.1 HSCA...............................................................................12
3.4 Uplink Card.....................................................................................17
3.4.1 KU1A ...............................................................................17
3.4.2 HU8A ...............................................................................21
3.5 Power Card ....................................................................................24
3.5.1 PIBA.................................................................................24
3.6 10G EPON Service Card ................................................................25
3.6.1 EX8A................................................................................25
3.7 GPON / XG-PON Service Card .......................................................28
3.7.1 GX8A ...............................................................................28
3.7.2 GM8A...............................................................................31
3.7.3 GPOA...............................................................................34
3.8 Other Cards....................................................................................36
3.8.1 CIOA ................................................................................36
4Modules .......................................................................................................39
4.1 Mappings Between Modules and Cards ..........................................40
4.2 PON Module...................................................................................42

4.2.1 10G EPON Optical Module ...............................................43
4.2.2 GPON Optical Module ......................................................43
4.2.3 XG-PON Optical Module ...................................................44
4.2.4 Combo PON Optical Module .............................................44
4.3 Ethernet Module .............................................................................45
4.3.1 GE Module .......................................................................46
4.3.2 10GE Optical Module........................................................48
4.3.3 100G Optical Module ........................................................50
5Wires and Cables .........................................................................................51
5.1 Cable Overview ..............................................................................52
5.2 Power Cable...................................................................................52
5.2.1 External Power Cable .......................................................53
5.2.2 Subrack DC Power Cable .................................................55
5.3 Protection Earth Ground Cable .......................................................56
5.3.1 PDP Protection Earth Ground Cable .................................57
5.3.2 Subrack Protection Earth Ground Cable............................58
5.4 Alarm Cable....................................................................................59
5.4.1 Alarm Cable for the Head of Row Cabinet .........................59
5.4.2 Subrack Alarm Cable ........................................................60
5.5 Fiber Jumper ..................................................................................62
5.6 Network Cable................................................................................63
5.7 Time Synchronization Cable............................................................65
5.8 Coaxial Clock Cable .......................................................................66
5.9 Serial Port Line ...............................................................................67
5.10 Dry Contact Cable ..........................................................................69
6Cabinet.........................................................................................................70
6.1 Cabinet Overview ...........................................................................71
6.2 Detailed Dimensions of the Cabinet.................................................72
6.3 Equipment Layout...........................................................................73
7PDP .............................................................................................................74
7.1 PDP Overview ................................................................................75
7.2 PDP850A (3000064).......................................................................75

1Documentation Guide
Document Orientation
Hardware Description gives a detailed introduction to the hardware components of
the AN6000-17. This manual is designed for readers who want to have a detailed
knowledge about the hardware of the equipment or need the hardware information
to guide their operation and maintenance of the equipment.
Intended Readers
uMarketing personnel
uCommissioning engineers
uOperation and maintenance engineers
Version Information
Version Version Information
A Initial version.
Content
Chapter Summary
Subrack
uSubrack model and specifications
uSubrack structure
uFan unit
uSlot distribution and cards supported
Cards
uCard structure and card overview
uInterfaces and indicator LEDs on the card panel
uModules supported and performance parameters
uWorking principle
Modules
uMappings between modules and cards
uModule types and specifications
Wires and Cables
uCable functions
uCable structure
uConnections and specifications of wires and cables
Version: A 1

AN6000-17 Optical Line Terminal Equipment Hardware Description
Chapter Summary
Cabinet
uCabinet overview
uAppearances and detailed dimensions of the cabinets
uEquipment layout
PDP
uPDP overview
uPanel and terminals of the PDP
Related Documentation
Document Applied to
AN6000-17 Optical Line Terminal Equipment
Product Description Network planning phase
AN6000-17 Optical Line Terminal Equipment
Quick Installation Guide Network deployment phase
AN6000-17 Optical Line Terminal Equipment
UNM2000 Configuration Guide
Network deployment phase / network
maintenance phase
AN6000-17 Optical Line Terminal Equipment CLI
Reference
Network deployment phase / network
maintenance phase
2Version: A

2Subrack
Subrack Model and Specifications
Subrack Structure
Fan Unit
Slot Distribution and Cards Supported
Version: A 3

AN6000-17 Optical Line Terminal Equipment Hardware Description
2.1 Subrack Model and Specifications
Model
The model number of the AN6000-17 subrack is 3061146.
Dimensions
Item Specification
Dimensions of the subrack with mounting ears for 21-
inch cabinets (H × W × D) 486 mm × 530 mm × 282 mm
Note:
The 21-inch mounting ears are integrated with the side panels of the
AN6000-17 subrack.
Weight
Item Specification
Weight of an empty subrack (excluding the fan unit) 14 kg
Weight of an empty subrack (including the fan unit) 19 kg
Operating Environment
Item Specification
Working temperature Long term: 0℃to 45℃
Short term: -5℃to 60℃
Working relative humidity 5% to 90% (non-condensing)
Storage temperature -40℃to 70℃
Relative humidity for storage 5% to 95%
Overall Power Consumption
The overall power consumption is measured under the following conditions:
uStatic power consumption: all the broadband ports are deactivated.
uTypical power consumption: 50% of the broadband ports are concurrently
activated.
4Version: A

2 Subrack
uMaximum power consumption: all the broadband ports are concurrently
activated.
Typical Configuration Static Power
Consumption
Typical Power
Consumption
Maximum
Power
Consumption
2*HSCA + 16*GX8A + 2*PIBA + HU8A + FAN +
CIOA 1119 W 1284 W 1536 W
2*HSCA + 16*GM8A + 2*PIBA + HU8A + FAN +
CIOA 1087 W 1332 W 1632 W
2*HSCA + 16*GPOA + 2*PIBA + HU8A + FAN +
CIOA 1071 W 1140 W 1296 W
2*HSCA + 8*GPOA + 8*GX8A + 2*PIBA + HU8A
+ FAN + CIOA 1095 W 1212 W 1416 W
2.2 Subrack Structure
No. Name Function
①Horizontal fan card slot Houses the fan card.
②Vertical card slot Accommodate cards to implement various
functions of the equipment.
③ESD protection earth ground
fastener Connects to the ESD protection device.
Version: A 5

AN6000-17 Optical Line Terminal Equipment Hardware Description
No. Name Function
④Mounting ear Secures the subrack in the cabinet.
⑤Fiber puller hanger Holds the fiber puller.
⑥Subrack earth ground point Connects with the subrack earth ground
cable.
Note:
The AN6000-17 is not designed with an anti-dust screen. The cabinet is
used for dust prevention.
2.3 Fan Unit
Model
The model number of the fan unit for the AN6000-17 is 405000320.
Appearance
Working Principle
uLocated on the top of the subrack, the fan unit facilitates air cooling in the
subrack by drawing air. A flow of cooling air is drawn into the subrack from its
lower part. After passing through each working card in the subrack, the air is
6Version: A

2 Subrack
exhausted from the upper part of the subrack.
uThe fan unit is configured with a fan monitoring board, which can detect the
working status of the fans. The monitoring board provides interfaces for
communication with the core switch card of the equipment, and sends the
monitoring information to the core switch card regularly.
uThe fan unit provides seven speed choices: 1 to 7, in the ascending order of
speed. The fan speed can be regulated in two modes: the manual mode and
the intelligent mode.
4In the manual mode, the fan unit operates at the speed set in the network
management system.
4In the intelligent mode, the core switch card of the equipment automatically
selects a speed for the fan unit according to the card temperature detected,
and the fan unit will operate at the selected speed.
Indicator LEDs
Identifier Meaning Color Status Description
ACT Working
indicator LED Green
ON The fan is powered on normally.
OFF The fan is not powered on
normally.
ALM Alarm indicator
LED Red
ON The fan is faulty.
Blinking The fan has its speed regulated
automatically.
OFF The fan is working normally.
Version: A 7

AN6000-17 Optical Line Terminal Equipment Hardware Description
Technical Specifications
Item Specification
Dimensions (H × W × D) 494 mm × 269.5 mm × 60 mm
Weight 5.0 kg
Typical power consumption (the power consumption
when the fan unit is operating at speed level 3)
≤90 W
Maximum power consumption (the power consumption
when the fan unit is operating at speed level 7)
≤270 W
2.4 Slot Distribution and Cards Supported
Slot Distribution
The AN6000-17 subrack has 22 vertical slots and one horizontal slot.
Card Supported
The slots can be classified as follows according to the cards they house:
Type Slot Card Supported
Service card slot 1 to 8, 11 to 19 EX8A, GX8A, GM8A and GPOA
Uplink card slot 18 to 19 KU1A and HU8A
Core switch card slot 9 to 10 HSCA
Fan card slot 23 FANA
Power card slot 24 to 25 PIBA
Common interface card slot 26 CIOA
8Version: A

3Cards
Card Structure
Card Overview
Core Switch Card
Uplink Card
Power Card
10G EPON Service Card
GPON / XG-PON Service Card
Other Cards
Version: A 9

AN6000-17 Optical Line Terminal Equipment Hardware Description
3.1 Card Structure
Card Structure
The figure below illustrates the card structure, using the GX8A card as an example.
Figure 3-1 Card Structure
No. Name Function
①Card Name Identifies the card.
②Indicator LED
area
Contains various indicator LEDs, such as the interface status
indicator LED and the card operating status indicator LED.
③Card panel Provides card-related identifiers; protects and secures the card.
④Interface Connects to different devices to implement the card functions.
⑤Latch Facilitates plugging or unplugging a card.
Card Dimensions
The figure below shows how the card dimensions are measured.
10 Version: A

3 Cards
Width: The height of the
reed is not counted.
Depth: The maximum distance between the panel and the
connector.
Figure 3-2 Card Dimensions
The table below lists the card dimensions.
Card Type Card Name Dimensions (H × W × D)
Core switch card HSCA 392 mm × 29.7 mm × 230.6 mm
Uplink card KU1A, HU8A 392 mm × 23 mm × 230.6 mm
Power card PIBA 98 mm × 25.1 mm × 255.5 mm
Service card EX8A, GX8A, GM8A and
GPOA 392 mm × 23 mm × 230.6 mm
Common interface
card CIOA 194 mm × 25.1 mm × 230.6 mm
Fan card FAN 494 mm × 60 mm × 269.5 mm
3.2 Card Overview
The cards can be divided into the following types according to their functions:
Version: A 11

AN6000-17 Optical Line Terminal Equipment Hardware Description
uThe core switch card aggregates, switches and controls traffic flow, processes
Layer-2 protocols, and manages the faults, performance and configuration of
the equipment.
uThe uplink card provides uplink ports for uplinking.
uThe power card inducts the DC power supply for the equipment.
uThe service cards provide service ports to enable integrated service access by
working together with the ONUs.
The table below describes the names, numbers, and power consumptions of
various cards.
Card Type Card Name Card Number Static Power
Consumption
Typical Power
Consumption
Maximum
Power
Consumption
Core switch card HSCA 2202093 58 W 74 W 90 W
Uplink card KU1A 2202598 16 W 23 W 30 W
HU8A 2202094 12 W 17 W 24 W
10G EPON service
card EX8A 2202597 37 W 50 W 64 W
XG-PON service
card GX8A 2202647 44 W 52 W 62 W
GPON & XG-PON
Combo service card GM8A 2202648 42 W 55 W 68 W
GPON service card GPOA 2202802 41 W 43 W 47 W
Other cards CIOA 2202096 3 W 3 W 3 W
3.3 Core Switch Card
The core switch card aggregates, switches and controls traffic flow, processes
Layer-2 protocols, and manages the faults, performance and configuration of the
equipment.
3.3.1 HSCA
Basic Information
Card Overview describes the number and power consumption of the card.
12 Version: A