Firefly Splashy User manual
User Manual
Splashy Benutzeranleitung
Manual de usuario de Splashy
Manuale d’Uso Splashy
Manual do Utilizador Splashy
Mode d’emploi du Splashy
Family Freedom fireflyfriends.com
Languages / Sprachen / Idiomas / Le lingue /
Línguas / Les langues
English p.04
Deutsche p.34
Español p.64
Italiano p.94
Português p.124
Français p.154
p4 Splashy User Manual
English
Please read all user instructions
carefully before using Splashy.
These instructions can also be
downloaded from our website
555@n0#o7$0'#,"1@!-+ along
with videos, diagrams and
other useful downloads.
Contents
01 Intended Use p.03
02 Declaration of Conformity p.04
03 Terms of Warranty p.04
04 Safety Information p.05
05 Cleaning and Care Information p.06
06 Product Inspection and Servicing p.08
07 Important Guidelines p.09
px#Q'113',%'0#o70-"3!21 .@py
09 Instructions for Use p.10
10 Sizing Information p.30
Splashy User Manual p5
English
SECTION 01: Intended Use
The Splashy bath seat is intended
to provide support for children with
disabilities who require head and
trunk support whilst using the bath.
-01203!230#A1$#27,"13..-02A'2'1
#11#,2'*2&2.*1&7'122!&#"2-
2&#o--01'22#0 1#3,'22**2'+#1@
Splashy is designed for children aged
between approximately 1–8 years old
and with a maximum user weight of
30kg (66lbs).
Splashy is made up of 3 main parts:
!)0#12A1#2 1#,"o--01'22#0
base unit. You will also receive a
support pack including a 5-point
harness and 4 x ‘bumper’ supports
for use anywhere on the seat where
support is required (i.e. head rest
or pommel).
&# !)0#12A1#2 1#,"o--01'22#0
1#3,'21&-3*"n2#1'*7,"
securely together – see Section 09 of
this manual for further instructions.
Children should not be left
unattended/unsupervised
in their Splashy bath seat
at any time, as they could
be at risk of drowning or
injuring themselves.
We recommend that an adult
completes product inspections in
accordance with Section 06 of this
user manual to ensure the product is
1$#2-31#@'0#o70'#,"12"@
,"+#1#!)#7#1'%,2"@
cannot accept any responsibility if the
product is used outside of its intended
31#@$',"-3 2.*#1#!-,2!2'0#o7
customer services on UK 0800 318265
or ROI 1800 626020.
Daily activities tested and
..0-4#" 7'0#o70'#,"12"
,"+#1#!)#7#1'%,2"0#B
1. In the bath or shower
2. For water play activities
1#-$.*1&7-321'"#2&#
2&0--+AH13!&12&#%0"#,
-0 #!&J1&-3*" #11#11#"',
"4,!#@#+',"$3*2&2.*1&7
!-,2',15-0)',%o--01'22#0Q2-Q
1#2!-,,#!2'-,15&'!&!-3*" #
$$#!2#" 71+**.02'!*#1,"G
-0- 1203!2'-,1H13!&11-'*A%011
-01,"J@$.*1&7"-#1!-+#
',2-!-,2!25'2&,713 12,!#1
2&2!-3*"$$#!22&#o--01'22#0Q2-Q
1#2!-,,#!2'-,1A#,130#2F#
2&-0-3%&*70',1#"$2#031#@
*#1#0#$#02-#!2'-,pt$-0
$#27,$-0+2'-,,"#!2'-,pu
$-0$302�%3'",!#-,!*#,',%
and care.
p6 Splashy User Manual
English
prB#!*02'-,-$-,$-0+'27
+#1#!)#7#1'%,2"@A1+,3$!230#05'2&1-*#0#1.-,1' '*'27$-02&#'0#o7
brand, declares that Splashy conforms to the requirements of the medical device
directive 93/42/EEC. Splashy has been CE marked as a Class 1 medical device.
SECTION 03: #0+1-$00,27
The warranty for Splashy applies only
when the product is used according
to its intended use, following all
+,3$!230#0`11.#!'n!2'-,1@
A one year warranty is provided
5'2&2&'1+#1#!)#7#1'%,2"@
manufactured product.
Goods can be returned to us for
warranty, repair or replacement up
to 12 months from receipt. Once you
contact us, we will arrange collection
of the goods at our expense and, once
returned to us we will repair or replace
goods and return them to you within
14 days. In all cases, it is the customers’
responsibility to ensure the goods
being returned are suitably packaged,
preferably in the original packaging.
Splashy User Manual p7
English
ptB$#27,$-0+2'-,
1. Always read user instructions
fully before use.
2. Children should not be left
unattended/unsupervised
at any time in this product.
3. If using Splashy at the beach,
never leave your child
unattended near the sea.
4. Check that all of the Splashy
components are securely assembled
according to user instructions before
use. Splashy must be attached to
2&#o--01'22#0 1#3,'22**2'+#1
,".*!#"-,n0+A1-*'"A122'!
surface. Never use Splashy on a
sloping surface.
5. The maximum user weight
for Splashy is 30kg (66lbs).
T&'11&-3*",#4#0 ##6!##"#".
6. Splashy contains parts which could
present a choking hazard to small
children. Check all components are
tight and securely fastened before
use – including toggles and straps.
7. Do not modify Splashy or use
!-+.-,#,21-2&,'0#o7
approved components with
Splashy at any time. This may
put your child at risk and may
also invalidate your warranty.
8. When using Splashy in environments
which may have soil/sand/grass or
small components, always ensure
2&27-3!*#,-322&#o--01'22#0Q2-Q
seat connections after every use to
prevent any obstructions.
-00#!-,,#!2',%o--01'22#02-1#2
please refer to Section 09.2.6
9. After use, allow Splashy to dry
thoroughly before storing it away
carefully. Splashy should be kept
away from all direct sources of heat
',!*3"',%,)#"o+#1A!'%0#22#1A
electric and gas heaters.
10. Clean the product regularly in
accordance with Section 05 of
this user manual.
11. Complete maintenance checks
on a regular basis to ensure
your product is in good working
condition. Splashy should not be
used if any of the parts are faulty.
12. If you are in ,7"-3 2about the
1$#31#-$.*1&7-02&#o--01'22#0
base unit, or if any parts should
fail, please cease using the product
'++#"'2#*7,"!-,2!2'0#o7
customer services on UK 0800
318265 or ROI 1800 626020.
13. Any promotional items supplied
with Splashy should not be used
unsupervised.
Failure to follow these instructions
may put you or the child at risk.
p8 Splashy User Manual
English
puB*#,',%,"0#,$-0+2'-,
How to Maintain
• When cleaning Splashy we
recommend that you use only warm
water and a non-abrasive detergent.
Never use organic solvents or dry
!*#,',%o3'"1@
• Do not machine wash or steam
clean Splashy’s foam components
as it may cause the foam to lose
shape and warp.
• We recommend that you do not use
any type of prescribed medicated
lotions in the bath water during
the bathing process as this may
contribute to the breakdown
of Splashy’s materials.
• Wipe the bath surface clean of any
residue or dirt before attaching the
o--01'22#02-'2A#,130',%2 #0
$##2%0'.n0+*72-2&# 2&@
• To remove sand/soil/grass or any
small particles that may be in the
o--01'22#0Q2-Q1#2!-,,#!2'-,1A1*'%&2
tapping of the area will encourage the
particles to fall out. Rinse thoroughly to
ensure there is no build up of particles
inside the connections. For stubborn
*-!)%#1-,2&#o--01'22#0A2&#*2!&
can be given a thumb push to remove
any particules and aid release.
• Should your bath seat come into
contact with salt water, rinse all
parts thoroughly with fresh,
clean water.
uQ.-',20,#11
The Splashy 5-point harness can
be removed and cleaned with
soapy water.
Floorsitter Base Unit
q@,130#2&# -22-+-$2&#o--01'22#0
base unit is cleaned after every use
to ensure it grips onto the bottom
of the bath.
2. Soap and water can be
used for daily cleaning.
3. Do not use solvents to clean
2&#o--01'22#0 1#3,'2@
.*1&7-+#21#A
Backrest and Supports
1. Soap and water can be used
for daily cleaning.
2. The EVA foam covers can be
removed and washed periodically
to avoid a build-up of residue
and grime.
Splashy User Manual p9
English
.*1&7`1$-+!-4#01!,
#0#+-4#","51&#"#4#07
$#5+-,2&1@
1. The EVA covers are attached by
eight hooks. Two on the seat back
and six on the seat base.
2. Detach all hooks by hand
(do not use tools).
3. Wash using soapy water.
4. Ensure the covers are completely
dry before reattaching.
5. Ensure all hooks are engaged
when putting the covers back on.
If Splashy is being used
in environments outside
of the bathroom,
(such as the beach or
garden) it is important
to rinse it after every use
so that it is free from any
particles/obstructions
that could affect its
working mechanisms.
For reconnecting
o--01'22#02-1#2.*#1#
refer to Section 09.2.6
Hook locations
p10 Splashy User Manual
English
SECTION 06:
Product Inspection
and Servicing
#0#!-++#,"2&240'-31!&#!)1
-$.*1&70#!00'#"-32 #$-0##!&
31#2-#,130#2&#.0-"3!2'11$#@
The recommended checks are
listed below:
1. Ensure that the Splashy back rest
and seat base have been n22#"
1#!30#*72-%#2� as detailed in
Section 09 of this manual.
2. Check that Splashy is n6#"!-00#!2*7
2-2&#o--01'22#0 1#3,'2 and
ensure it is stable and secure in
the bath before placing the child in.
3. Ensure the 5-point harness and
bumper supports are 1#!30#*7n6#"
2-.*1&731',%2-%%*#n6230#1@
4. Check the 5-point harness and
bumper supports for ,71'%,1-$
wear or tear.
5. Check the buckles and toggles
for cracks or damage.
6. Check Splashy and Floorsitter
latches and connections are clear
of dirt or debris with ,-1'%,1-$
wear and tear.
If you are in any doubt
about the safe use of your
'0#o7.0-"3!2-0'$,7
parts should fail, please
cease using the product
and contact our customer
services department as
soon as possible.
For all service related issues
.*#1#0#$#02-2&#'0#o75# 1'2#
555@n0#o7$0'#,"1@!-+ or contact
'0#o7-,customer.enquiries@
n0#o7$0'#,"1@!-+
Splashy User Manual p11
English
pxB#Q'113',%
'0#o70-"3!21
Ensure the product has been cleaned
thoroughly in accordance with
Section 5 of this manual. Ensure a
copy of the user manual is supplied
with the product. If in any doubt
about the continued safe use of your
'0#o7.0-"3!2-0'$,7.0211&-3*"
fail, please cease using the product
and contact our customer service
department as soon as possible on
UK 0800 318265 or ROI 1800 626020.
SECTION 07:
Important Guidelines
Ensure that Splashy is sitting securely
in the bath. Recline the back rest into
a mid-recline position for children who
can assist with transfers or are lifted
into the bath. Please refer to
section 09.5
Full recline should be used for children
who will be hoisted into the bath.
This should make transfers into
Splashy easier.
#5-3*""4'1#7-3n22&#uQ.-',2
harness and bumper supports to
Splashy before you place the child
into the seat, however, they can be
adjusted if necessary once your child
is in the bath. Please exercise caution
and monitor your child closely whilst
alterations are being made to the
bath seat.
'$2',%!&'*"',,"-32-$2&# 2&
is an activity which could cause injury
to your back. We would recommend
7-31##)"4'!#$0-+7-32�.'12
with regards to safe lifting (manual
handling techniques) of your child
in and out of the bath.
p12 Splashy User Manual
English
SECTION 09:
,1203!2'-,1$-01#
09.1 Splashy Parts
Your Splashy will arrive
with the following parts:
1x Back rest
1x Seat base
1x Floorsitter base unit
4x Bumper supports
1x Groin strap & 4x Harness straps
The Splashy duck is
to be used under the
direct supervision
of an adult
Splashy User Manual p13
English
09.2 Assembling Splashy
• We highly recommend that you
complete a ‘dry run’ with your
child in Splashy whilst wearing light
clothing to ensure correct placement
of harness and bumper supports.
• Make sure your bath is clean
and free from any residue before
.*!',%2&#o--01'22#0',2-2&# 2&@
• Your Splashy MUST be assembled
BEFOREn**',%2&# 2&5'2&52#0@
#0#!-++#,"7-3n**2&# 2&5'2&
a mixture of hot and cold water to
prevent damage to Splashy.
• See section 09.5 for some guidance
on how to position the recline arm
on the Splashy.
Continued
09.2.1 Placement of
2&#o--01'22#0
&#o--01'22#01&-3*"*571 #
.*!#"-,n0+A1-*'"A122'!130$!#@
&#,.*!',%2&#o--01'22#0-,7-30
chosen surface, it’s vital that all
rubber feet are in contact with
the surface.
The rubber feet can be adjusted to
facilitate curved baths. You can do
this by rotating the feet clockwise
or anti-clockwise depending on
your required adjustment.
The rubber feet can be moved into the
,00-5#01#!2'-,-$2&#o--01'22#02-
depending on the width of your bath.
You must ensure they mirror each
other. 4 or 6 feet would be stable.
p14 Splashy User Manual
English
09.2.1 Placement of
2&#o--01'22#0
,!#2&#o--01'22#0'1',.*!#A
ensure the recline arm is set to
its highest position.
09.2.2 Assembling the
Splashy seat
Before attaching Splashy to the
o--01'22#0A2&# !)0#12,"1#2
base must be assembled.
Hold the backrest of Splashy up
vertically with the grooves at the top.
Use your other hand to slot the seat
base into the grooves on the backrest.
Flip the seat base in the opposite
direction to lock the connection
together. Once connected insert
2&#&',%#$-+o.3,"#0,#2&
the foam backrest cover.
Splashy User Manual p15
English
To connect the shoulder and
lateral straps, follow this diagram.
To ensure you are placing the straps in
the correct side of Splashy, the buckle
should appear as pictured.
09.2.3 Attaching &
!-,n%30',%
the harness
& bumpers
To attach any of the support straps
and bumpers onto Splashy’s seat
base and back rest place the
relevant toggle through the hole.
Secure by turning the toggle
sideways underneath the seat.
p16 Splashy User Manual
English
py@r@t-,n%30',%
5 point harness
Insert toggle of the groin strap
into Splashy seat base.
Insert the toggle of the
left shoulder strap through
the hole at the correct
height for your child.
Insert the toggle of
the left lateral strap
into a hole on the side
panels of the back rest.
Repeat the process
for the right shoulder
and lateral straps.
Once all the straps
are securely in place,
connect all the straps
together using the
buckle to create a
5 point harness.
The straps can be
fully adjusted by
releasing the clamp,
making the strap tighter
or looser depending on
requirements. Please ensure
the clamp is closed once
the strap has been adjusted.
Tip – When happy with
adjustment you can thread the
remaining section of the strap
through the foam section of
the harness to keep it tidy.
Splashy User Manual p17
English
py@r@u-,n%30',%
3 point harness
Insert the toggle of
the left lateral strap
into a hole on the side
panels of the back rest.
Repeat the process
for the right lateral strap.
Once all the straps
are securely in place,
connect all the straps
together using the
buckle to create a
3 point harness.
-,-2"(312!-,n%302'-,$0-+u.-',2&0,#11
to a 3 point harness while the child is in the bath seat.
p18 Splashy User Manual
English
09.2.6 Fitting Splashy
seat to the
o--01'22#0
-5#0.*1&75'2&2#2 1#
o2-,2-2&#o--01'22#0@
Making sure the seat base
is centrally aligned with the
o--01'22#0+-4#2#2 1#
forward so the seat base slides
into the locking channel.
When the seat base locks into
2&#o--01'22#07-35'**�
click which will mean the lock
has been engaged.
'12#,$-03"' *#!*'!)
when engaging both
seat base and seat back
2-2&#o--01'22#0@
Splashy User Manual p19
English
Before attaching the recline
arm to the backrest, ensure
that it is at the highest setting.
With one hand on Splashy,
use the other hand to push the
button highlighted and slot the
attachment into the backrest.
Once attached correctly,
you will hear a click.
This picture shows what the
bath seat should look like
when it is fully assembled.
It is now safe to put your
child into Splashy.
p20 Splashy User Manual
English
09.3 Bumper Supports
Once your child is safely secured in
Splashy using the harness, you can
then secure the bumpers to provide
extra support.
The bumpers are being used as head
supports in this picture, however they
can be used as a pommel, anti-slide
support and/or leg guides.
If you feel your child requires
further support in Splashy,
extra bumpers can be purchased
from the Accessories section
-$2&#'0#o75# 1'2#@
Other manuals for Splashy
2
Table of contents
Languages:
Other Firefly Medical Equipment manuals
Popular Medical Equipment manuals by other brands
PHYWE
PHYWE Cobra SMARTsense EKG operating instructions
ResMed
ResMed AirFit N20 user guide
Infinite
Infinite sense Installation and setup guide
Customatic
Customatic Rize ELEVATION RI-ABE-A25-WH owner's manual
ACKERMANN
ACKERMANN Apollo user manual
Smiths Medical
Smiths Medical CADD-legacy 1 quick start guide