Fishbone Offroad FB21095 User manual

FB21095
Fits Standard Fairleads
Winch Line “Fishhook”
2109500
REQUIRED TOOLS
5/16” Allen Wrench
11/16” Wrench
KIT CONTAINS
Winch Line “Fishhook”
M10 Socket Head Screw
3/8” Lock Washer
M10 Hex Nut
3/8” Flat Washer
QTY
1
2
2
2
2
1. PREPARE
Remove any fairleads currently installed on your
bumper. If needed, disconnect your winch hook.
2. INSTALL
Slide your synthetic rope through the Fishhook’s
cable slot followed by your winch’s fairlead.

FB21095
Fits Standard Fairleads
Winch Line “Fishhook”
2 2109500
Holding the two parts together, place them up to
your bumper and into place using the two included
bolts lead by a flat washer.
With a 5/16” Allen wrench or hex bit socket and an
11/16” wrench, secure the Fishhook with a lock
washer, followed by a nut.
3. FINALIZE
Wrap the excess synthetic rope around the rope
support and resecure your winch hook.
Enjoy your Fishbone Offroad Winch Line
“Fishhook”!