Fishbone Offroad FB21114 User manual

FB21114
General Tube Doors
Tube Door Clamp Mirrors
REQUIRED TOOLS
4mm Allen
8mm Wrench
KIT CONTAINS
Clamp Mirror (Top)
Clamp Mirror (Bottom)
Cap Screw
QTY
2
2
4

FB21114
General Tube Doors
Tube Door Clamp Mirrors
1
1) LOOSELY INSTALL
With two of the included screws, and a mirror top
and bottom, loosely install the mirror so that it sits
upright unassisted. ………………………………………………
2) ADJUST TO PREFERENCE
Get inside your vehicle and move and twist the
mirror into your desired position. ………………………
3) TIGHTEN THE BOLTS
With a 4mm Allen key, tighten down the 2 screws
so that the mirror doesn’t slide or rotate on the
tube.
With an 8mm wrench, turn the hex nut behind the
mirror clockwise so that the mirror doesn’t rotate
or fall. ……………………………………………………………………
Repeat on the opposite side.
4) ENJOY YOUR NEW FISHBONE OFFROAD
HEADLIGHT GUARDS!