Fisher & Paykel WODV230 User manual

WODV230 & WOSV230
models
WALL OVEN
INSTALLATION GUIDE
US CA
591007C 07.18

4
H
B
C
A
D
G
F
E
5PRODUCT DIMENSIONS - SINGLE OVENS
PLAN
PROFILE
FRONT
PRODUCT DIMENSIONS WOSV230
INCHES (MM)
AOverall height of product 27 1/8” (689)
BOverall width of product 29 13/16” (757)
COverall depth of product (excludes handle and dials) 23 15/16” (608)
DDepth of oven front and control panel (excludes handle and dials) 1 9/16” (39)
EDepth of chassis (does not include oven front) 22 3/8” (569)
FHeight of chassis 26 9/16” (675)
GDepth of door (open) (measured from front of door) 20 7/8” (530)
HOverall width of chassis 28 5/16” (720)

6
H
B
A
C
D
E
F
G
5PRODUCT DIMENSIONS - DOUBLE OVENS
PRODUCT DIMENSIONS WODV203
INCHES (MM)
AOverall height of product 48 1/2” (1232)
BOverall width of product 29 13/16” (757)
COverall depth of product (excludes handle and dials) 23 15/16” (608)
DDepth of oven front and control panel (excludes handle and dials) 1 9/16” (39)
EDepth of chassis (does not include oven front) 22 3/8” (569)
FHeight of chassis 47 15/16” (1218)
GDepth of door (open) (measured from front of door) 20 7/8” (530)
HOverall width of chassis 28 5/16” (720)
FRONT
PROFILE
PLAN

11
!2 FINAL CHECKLIST
TO BE COMPLETED BY THE INSTALLER
Make sure the oven is level and securely fitted to the cabinetry.
Check the lower trim is undamaged.
Open the (lower) oven door slowly until it is fully open and check there is adequate clearance between the bottom of the door and the lower trim.
This is to ensure correct air circulation. Should the lower trim become damaged, straighten the trim and ensure the oven door opens fully without
obstruction.
Make sure any cable ties and internal packaging has been removed from the oven cavity.
Make sure all oven vents and openings are clear and free of any
obstruction or damage.
IMPORTANT!
Failure to make sure all oven vents are clear may result in poor product performance.
Make sure the isolating switch is accessible by the customer.
TEST OPERATION:
Turn the power to the oven on. The display will flash 24h. Set the clock following the instructions in the ‘Quickstart Guide’.
Turn the oven function to BAKE. The oven should start heating at the default temperature of 350f. After five minutes, open the oven door: the air
inside should feel warm. Turn the oven function dial back to OFF
Inside the oven cavity, the oven light should come on. Air should blow out of the vent at the bottom of the oven.
Have you demonstrated the basic operation to the customer?
Complete and keep for safe reference:
Model
Serial No.
Purchase Date
Purchaser
Dealer Address
Installer’s Name
Installer’s Signature
Installation Company
Installation Date

Modèles WODV230 &
WOSV230
FOUR ENCASTRÉ
GUIDE D’INSTALLATION
CA
591007C 06.18

3
H
B
C
A
D
G
F
E
5DIMENSIONS DU PRODUIT - FOURS SIMPLES
HAUT
CÔTÉ
AVANT
DIMENSIONS DU PRODUIT WOSV230
INCHES (MM)
AHauteur hors tout de l’appareil 27 1/8” (689)
BLargeur hors tout de l’appareil 29 13/16” (757)
CProfondeur hors tout de l’appareil (sans la poignée) 23 15/16” (608)
DProfondeur du cadre de four et du panneau de commande
(à l’exclusion des boutons)
1 9/16” (39)
EProfondeur du châssis 22 3/8” (569)
FHauteur du châssis 26 9/16” (675)
GProfondeur de la porte du four
(ouverte) (mesurée à partir de l’avant du cadre de four)
20 7/8” (530)
HLargeur du châssis 28 5/16” (720)

5
5DIMENSIONS DU PRODUIT - FOURS DOUBLES
H
B
A
C
D
E
F
G
DIMENSIONS DU PRODUIT WODV230
INCHES (MM)
AHauteur hors tout de l’appareil 48 1/2” (1232)
BLargeur hors tout de l’appareil 29 13/16” (757)
CProfondeur hors tout de l’appareil (sans la poignée) 23 15/16” (608)
DProfondeur du cadre de four et du panneau de commande
(à l’exclusion des boutons)
1 9/16” (39)
EProfondeur du châssis 22 3/8” (569)
FHauteur du châssis 47 15/16” (1218)
GProfondeur de la porte du four
(ouverte) (mesurée à partir de l’avant du cadre de four)
20 7/8” (530)
HLargeur du châssis 28 5/16” (720)
AVANT
CÔTÉ
HAUT