Fisher & Paykel WOSV230 Guide

Using the Self Clean Function
• During the pyrolytic Self Clean cycle the extremely high temperature burns off and breaks down grime and
grease deposits. All that is left is a small amount of grey ash that you can easily remove.
◦ There is a choice of two Self Clean cycles:
◦ Self Clean (5 hours) (for normal soiling).
• Light Self Clean (4 hours) (suitable for a light or localized soiling).
Double oven models only:
• nly one oven can be self-cleaned at a time.
• During the Self clean cycle you cannot use the other oven or set Automatic cooking.
https://producthelp.fisherpaykel.com/us/Cook/Built-In_ vens/Single/W SV2/W SV2-30_N/User_Guide_W SV2-30_N/10_U…
Updated: Sun, 09 Apr 2023 00:24:34 GMT
Powered by
1

• You must clean the inside glass door panel BEF RE starting a self-clean cycle. Failure to do
this may result in permanent staining or marking of the door glass.
• Do not use oven cleaners, any degreasing cleaners, or oven liners.
• Make sure you remove the side racks, oven shelves and trays and all other bakeware and
utensils from the oven before starting a Self Clean cycle. If left in the oven, they will become
permanently discoloured or damaged; items made from combustible materials (eg wood, fabric,
plastic) may even catch fire.
• Do not use your oven to clean miscellaneous parts.
• Make sure the room is well ventilated.
• Before starting a Self Clean cycle, make sure you move any pet birds to another, closed and
well-ventilated room. Some pet birds are extremely sensitive to the fumes given off during a Self
Clean cycle, and may die if left in the same room as the oven during such a cycle.
• During a Self Clean cycle, the oven reaches higher temperatures than it does for cooking. Under
such conditions, the surfaces may get hotter than usual and children should be kept away.
• The oven door will be locked during the Self Clean cycle (approximately 3 hours).
• If there are cracks or flaws on any of the oven door glass panes, if the oven seal is damaged or
worn, or if the door does not close properly, do not start a Self Clean cycle. Call your Authorised
Repairer or Customer Care.
To Start a Self Clean Cycle
1. Remove oven shelves, side racks and all other
accessories, bakeware, and utensils.
2. Wipe up any spills. Failure to do so may discolour
the oven surfaces.
3. Check the inner glass pane of the oven door. If it
has soiling on it (eg stains from greasy splatter),
you will need to clean it manually before starting a
Self Clean cycle. For instructions, see ‘Care and
cleaning’.
4. Close the oven door firmly.
If soiling is left on the glass, it
will become burnt on during
the Self Clean cycle, making it
very difficult to remove.
https://producthelp.fisherpaykel.com/us/Cook/Built-In_ vens/Single/W SV2/W SV2-30_N/User_Guide_W SV2-30_N/10_U…
Updated: Sun, 09 Apr 2023 00:24:34 GMT
Powered by
2

5. Turn the function knob to SELF CLEAN.
• The halo will glow red.
Double ovens only: Ensure
the function knob for the other
oven is turned to FF.
6. REM VE RACK: PRESS PLUS T C NTINUE
will flash in the display.
7. Press PLUS to confirm that that you have removed
all oven shelves, trays, and side racks.
8. VEN ST PS IN and the self clean cycle length
will display and flash.
• There are two cycle times available: 4 hours for
light soiling, and 5 hours for normal soiling.
9. Press PLUS or MINUS to choose between the
different cycle lengths.
10. Press ACCEPT to confirm the cycle time and start
the self clean cycle. The oven is now locked and
the length of time for the self clean cycle will begin
counting down.
• D R L CKED will also appear in the display.
• The time remaining in the self clean cycle will
show in the display.
https://producthelp.fisherpaykel.com/us/Cook/Built-In_ vens/Single/W SV2/W SV2-30_N/User_Guide_W SV2-30_N/10_U…
Updated: Sun, 09 Apr 2023 00:24:34 GMT
Powered by
3

11. Towards the end of the self clean cycle, the oven
will start cooling down.
• C LING will appear in the display.
• The door will remain locked.
• The display will show the remaining cool down
time.
Double ovens only:
• While a self clean cycle is set for one cavity, you
cannot use the other cavity for cooking.
• Self clean can only be set for one cavity at a time.
During a self clean cycle, if the function knob for the
other cavity is turned, a warning will show in the display
for a few seconds.
When a Self Clean Cycle has Finished
• A tone will sound
• The door will unlock
• The time of day will remain in the display and the oven switches off.
Turn the function knob to the FF position.
You need to:
1. Wait for the oven to cool down completely
2. Remove the grey ash with a small brush or damp cloth
3. Wipe out the oven with a clean damp cloth
4. Dry with a clean lint-free cloth
5. Replace the side racks and shelves.
https://producthelp.fisherpaykel.com/us/Cook/Built-In_ vens/Single/W SV2/W SV2-30_N/User_Guide_W SV2-30_N/10_U…
Updated: Sun, 09 Apr 2023 00:24:34 GMT
Powered by
4

To Cancel a Self Clean Cycle
• A Self Clean cycle can be canceled at any time by pressing CANCEL.
• The door will not unlock until the oven has cooled to a safe temperature. Do N T turn off the
mains power supply to the oven (wall switch). Turning off the power while the oven is too hot
may damage the oven and its surrounding cabinetry.
To cancel a Self Clean cycle, press CANCEL.
• If the oven needs to cool down:
◦ C LING / D R L CKED will appear in the display.
◦ The door will remain locked.
◦ The display will show the remaining cool down time.
• When it has cooled down, the oven will turn off, the door will unlock, a long tone will sound and the display will
show the time of day.
• We do not recommend cancelling a Self Clean cycle and then immediately starting one again.
https://producthelp.fisherpaykel.com/us/Cook/Built-In_ vens/Single/W SV2/W SV2-30_N/User_Guide_W SV2-30_N/10_U…
Updated: Sun, 09 Apr 2023 00:24:34 GMT
Powered by
5