Fisher-Price Rock 'n Play User manual

B. This model includes a soothing unit on the
upper frame. It does not have an auto-rock unit.
A. This model does not have a soothing unit or an
auto-rock unit. Some models require that you pull the
tubes apart to remove the hub assemblies. Follow steps
1-4 and 9 in the Asection. Other models have buttons
on the tubes. You’ll need to press the buttons while pull-
ing to remove hub assemblies from the frame and bases.
Follow steps 5-9.
D. This model includes a combined
soother-auto-rock unit on the base of the product.
E. This model includes a combined
soother-auto-rock unit on the base of the product. This
model also has wood bases.
C. This model includes a soothing
unit on the upper frame and an
auto-rock unit on the base. The
auto-rock controls are on located on
the soothing unit.
To process your return, you’ll need to send us both hub assemblies from your
product. There are several dierent models of the Rock ‘n Play Sleeper with
dierent product assembly. Please select the instructions that most closely
resembles your product. For some models, you’ll need a Phillips
screwdriver/scissors/wire cutters to remove the hub assemblies.

2
PUSH
PUSH
PRESS
PRESS
PRESS
PRESS
• Press the buttons on
the hub tubes and lift to
remove the frame tubes.
1
2
A
A
A
• If your product frame
resembles the product
shown here, follow
the instructions in this
section - A.
• Steps 1-4 are for models
with buttons on the frame.
• Press the fold button on
each hub and fold the
product.
Note: Your product may have
only one fold button.

3
• Press the button on each hub
tube and pull to remove the
base from the hub tubes.
• Press the button on each hub
tube and pull to remove the
base from the hub tubes.
3
4
PRESS
PRESS
PRESS
PRESS
A
A
PUSH
PUSH
PRESS
PRESS
5
A
• Steps 5-9 are for models
without buttons on the
frame.
• Press the fold button on
each hub and fold the
product.
Note: Your product may have
only one fold button.

• Pull to remove a base from the
hub tubes.
7
6
A
4
• Pull the frame tubes from
the hub tubes. A

• Pull to remove the other base
from the hub tubes.
8
A
5
• Go to the last page for
instructions to mail the
hub assemblies back to
Fisher-Price.
9
A

6
B
B
If you’re having
trouble removing
a base, turn the
frame upright.
Step on the base
and pull the hub
tubes.
• Turn your product over and
place on a flat surface.
• Carefully pull to remove
each base.
• If your product frame
resembles the product
shown here, follow the
instructions in section - B.
1

B
B
B
7
• Turn the product upright.
• Press the fold button
on the hub and fold the
product.
• Pull to remove the the
frame tubes from the
hub assemblies.
• Go to the last page for
instructions to mail the
hub assemblies back to
Fisher-Price.
PRESS
2
3
4

8
• Turn the product face down
on a flat surface.
• Using a Phillips screwdriver,
loosen and remove the screw
in the auto-rock unit.
• Press the buttons on the
hub tubes and pull to
remove the bases.
1
2
• If your product frame
resembles either
product shown here,
follow the instructions
in section - C.
C
C
C
PRESS
PRESS
PRESS
PRESS

PRESS
9
• Loosen and remove the
screws in the hub tube.
• Pull the auto-rock unit
from the hub tube.
• Using scissors or wire
cutters, cut the cord
extending from the
auto-rock unit.
• Turn the product upright.
• Press the fold button on the
hub and fold the product.
3
4
5
C
C
C

PRESS PRESS
PRESS PRESS
10
• Press the button on the frame
tubes and lift the frame tubes
from the hub tubes.
• On the other side of your
product, press the button
on the frame tubes and lift
the frame tubes from the
hub tubes.
• Go to the last page for
instructions to mail these
parts back to Fisher-Price.
6
7
8
C
C
C