Fisher-Price T4264 User manual

www.fisher-price.com
T4264

2
Assembled Parts
WARNING
• Please keep this instruction sheet for future
reference, as it contains important information.
• Requires three “AA” (LR6) alkaline batteries
(not included).
• Adult assembly is required.
• Tool required for assembly: Phillips screwdriver
(not included).
• Wipe this toy with a clean cloth dampened
with a mild soap and water solution. Do not
immerse this toy.
• This hub has no consumer serviceable parts.
Do not take this toy apart.
Consumer Information
To prevent entanglement injury,
never place the gym in a crib or
playpen. Never add strings, ties or
other products to the gym.
Hub
4 Tubes
Quilt
7 Toys
CO
N
S
UMER
ASS
I
S
T
A
N
CE
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Mattel Europa, B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.

3
• Slide a tube through one of the sleeves on
the quilt.
Hint: You may need to adjust the fabric on the
sleeve after you insert the tube.
• Repeat this procedure to attach the
remaining tubes.
Setup
Tube
Hub
1
1
1
2
Tube
• Insert the foot at the bottom of each tube
through the elastic loops on the quilt.
• Make sure the elastic loop is fitted below the
tab on each tube.
• Hang the toys from the loops around the gym.
1
3
1
4
Elastic Loop
Tab
• Insert the ends of the tubes into the sockets in
the hub. Make sure you hear a "snap".
• Pull each tube to be sure it is secure to the hub.

4
Fisher Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. T4264pr-0920
©2009 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. PRINTED IN CHINA
In exceptional circumstances, batteries may
leak fluids that can cause a chemical burn injury
or ruin your product. To avoid battery leakage:
• Do not mix old and new batteries or batteries of
different types: alkaline, standard (carbon-zinc)
or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods of
non-use. Always remove exhausted batteries
from the product. Dispose of batteries safely.
Do not dispose of product in a fire. The batteries
inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent
type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the product
before charging.
• If removable, rechargeable batteries are
used, they are only to be charged under
adult supervision.
Battery Safety Information FCC Statement
United States Only
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Consult the dealer or an experienced radio/TV
technician for help.
Note: Changes or modifications not expressly
approved by the manufacturer responsible for
compliance could void the user’s authority to
operate the equipment.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause
harmful interference and (2) this device must
accept any interference received, including
interference that may cause undesired operation.
ICES-003
This Class B digital apparatus complies with
Canadian ICES-003.
Operation is subject to the following two
conditions: (1) this device may not cause
harmful interference and (2) this device must
accept any interference received, including
interference that may cause undesired operation.
NMB-003
Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
L’utilisation de ce dispositif est autorisée seulement
aux conditions suivantes : (1) il ne doit pas
produire de brouillage et (2) l’utilisateur du
dispositif doit être prêt à accepter tout brouillage
radioélectrique reçu, même si ce brouillage est
susceptible de compromettre le fonctionnement
du dispositif.

5
Music, Lights and
Ocean Friends!
Slide the power/volume switch on the top of•
the hub to ON with low volume , or ON with
high volume .
Press the mode button to play up to 20 minutes•
of fun sounds and lights!
Press the button again to turn long play mode•
off and let baby's movement activate sounds
and lights!
When you are finished playing with this toy,•
slide the power/volume switch OFF .
Mode Button
• Locate the battery compartment on the top of
the hub.
• Loosen the screws in the battery compartment
door with a Phillips screwdriver. Remove the
battery compartment door.
• Insert three, new “AA” (LR6) alkaline batteries.
Hint: We recommend alkaline batteries for
longer battery life.
• Replace the battery compartment door and
tighten the screws.
• If this product begins to operate erratically,
you may need to reset the electronics. Slide the
power switch off and then back on.
• When sounds or lights from this toy become
faint or stop, it’s time for an adult to change
the batteries.
• Protect the environment by not
disposing of this product with
household waste (2002/96/EC).
Check your local authority for
recycling advice and facilities
(Europe only).
Battery Installation
1,5V x 3
“AA” (LR6)

6
1
2
Press the button above each tube on the hub to•
release the tubes.
Storage
Lay the tubes across the center of the quilt.•
Place the hub under one of the mesh arches,•
as shown.
Fold the quilt in half, as shown.•
Then, fold in half again.•
Slide one end of the storage strap through the•
storage loop.
Fasten the ends of the storage strap.•
Hub
PRESS
Tube
1
1
1
4
1
3
Storage Strap
Storage Loop
Hub