Fisher-Price GEO TRAX M2100 User manual

www.fisher-price.com
M2100

Assembly
A. 2 Small Flags
B. Large Flag
C. Roof
D. 4 Supports
E. Base
Parts
A
D
x2
B
E
C
• “Snap” the supports into the underside
of the base.
• “Snap” the flags into the roof.
Assembly is now complete.
x4
1
ROOF
BASE
2
SUPPORTS
SMALL FLAG
LARGE FLAG
SMALL FLAG
B
B
A
• First, fit the tabs on the front of the roof
into the slots in the front of the base
A
.
• Then, press the top of the roof to “snap”
the side tabs into place
B
.

So Many Ways to Play!
• Watch the panels spin when a train crosses
the bridge.
Multiple Levels
of Track Layouts!
1
• To build a ground-level layout, separate the bridge
assembly from the supports and place it on a
flat surface.
• Attach straight tracks (sold separately) to either
end of the bridge assembly.
Track not included and sold separately.
2
• Use supports and straight tracks (each sold
separately) to build an elevated assembly.
3
• You can also use an Elevation Track Pack™
(sold separately) to access the bridge.
• Attach ramp assemblies (sold separately) to
the ends of the bridge.

Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. PRINTED IN CHINA
©2007 Mattel, Inc. All Right Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. M2100a-0920
Visit www.fisher-price.com to see
the entire world of GeoTrax®accessories!
Please keep this instruction sheet for future reference,
as it contains important information.
Adult assembly is required.
No tools needed for assembly.
Wipe the toy with a clean, damp cloth. Do not immerse.