Fisher-Price XTREME MACHINE JR. 72664 User manual

Model Number: 72664
Please save these instructions for future reference.
Adult assembly is required.
Tools needed for assembly:
Cap Nut Assembly Tool (included), Phillips Screwdriver and Hammer (not included).
Age Grade: 11/2to 5 years.
Weight Limit: 50 lb. (23 kg)
™

2
PARTS
• If you experience a problem or are missing a part, please call us at 1-800-432-KIDS rather than return this product to
the store.
• Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts
are discarded.
• Metal parts have been coated with a lubricant to protect them during shipment.Wipe all metal parts with a paper towel to
remove any excess lubricant.
ALL SHOWN ACTUAL SIZE
• Adult supervision is required.
• Never use near steps, sloped driveways,
hills, roadways, alleys, swimming pool areas
or other bodies of water.
• Always wear shoes or sneakers.
• Never allow more than one rider.
WARNING
This product contains small parts.
Adult assembly is required.
CAUTION
Vehicle Body
2 Rear Wheels 2 Front Wheels
Front Axle B
(Left)
Cap Nut
Assembly
Tool Front Axle A
(Right)
Rear Axle
Steering Wheel
8 Bushings
Steering Wheel
Retainer
Key
Light Rack
Roll Cage - Right Side
Roll Cage -
Left Side
(Rear)
Roll Cage -
Left Side (Front)
Door Frame
(Outer) Door Frame
(Bottom Inner)
Door Frame
(Top Inner)
Not Shown: Label Sheet
Cap Nut - 6
Washer - 4
#8 x 3/4"
Screw - 11 #8 x 11/2"
Screw - 6

Assembly
• Identify the outside surface of each wheel. (See the inset
above to identify the inside surface of the rear [large]
wheels.The inside surface of the front [small] wheels are
marked IN.)
• Before applying labels to the wheels, make sure your
hands are clean and dry and wipe each wheel with a
clean, dry cloth.
• Apply label 23 to the outside surface of each rear wheel.
Apply label 2to the outside surface of each front wheel.
For best results, avoid repositioning a label once it has
been applied.
13
4
3
Inside
Outside
Note: The front axles are not interchangeable and are marked
A (right) and B (left). Identify the left front axle (B).
• Fit a washer onto the short leg of front axle B.
• Fit a bushing, plate side down, onto the short leg of front
axle B.
• Fit a front (small) wheel, “hubcap” side up, on the short leg of
front axle B.
2
A
A
BB
Front Axle
Left "B"
Front Axle
Right "A"
Cap Nut
Assembly Tool
Cap Nut
“Hubcap” Side
Front (Small)
Wheel
Short Leg
Bushing
Bushing
Barrel
Side
Washer
Front Axle B
Front Axle B
Washer
Long Leg of
Front Axle B
• Fit a bushing, barrel side down, onto the short leg of
front axle B.
• Place a cap nut in the cupped end of the cap nut
assembly tool.
• Hold the cap nut against the end of the short leg.Tap the
cap nut assembly tool with a hammer to secure the cap
nut on the end of the short leg of front axle B.
• Fit a washer on the long leg of front axle B.
Plate
Side
Rear Wheel

Assembly
6
4
Cap Nut
Rear Axle
57
8
• Lift the front end of the vehicle body and insert the long
leg of front axle B up into the hole marked B in the
vehicle body.
• Place a cap nut in the cupped end of the cap nut
assembly tool.
• Hold the cap nut against the end of front axle B.Tap the
cap nut assembly tool with a hammer to secure the cap
nut on the end of front axle B.
•Repeat steps 2 - 5 to assemble the right front axle (A)
to the vehicle body.
Cap Nut
Assembly Tool
Cap Nut
Front Axle B
Hole B
Hole
• Place a cap nut, cupped side up, on a flat, hard surface.
• Fit the end of the rear axle into the cap nut.
• Tap the opposite end of the rear axle with a hammer to
secure the cap nut on the end of the rear axle.
• Slide a bushing, plate side first, onto the rear axle.
• Slide a rear wheel, “hubcap” side first, onto the rear axle.
• Slide another bushing, barrel side first, onto the rear axle.
Barrel Side
Bushing
Rear
Wheel
Plate Side
Bushing
"Hubcap" Side
• Face the back of the vehicle.
• Slide the rear axle into the hole in one side of the vehicle
body, through the vehicle body and out through the hole in
the other side of the vehicle body.
Rear View
Rear Axle

Assembly
9
10
Plate
Side
• Slide a bushing, plate side first, onto the end of the
rear axle.
• Slide a wheel, “hubcap” side out, onto the rear axle.
• Slide another bushing, barrel side first, onto the rear axle.
• Place a cap nut in the cupped end of the cap nut assembly
tool and hold the cap nut against the end of the rear axle.
• Support the rear axle on the opposite side of the vehicle
body and tap the cap nut assembly tool with a hammer to
secure the cap nut on the end of the rear axle.
Rear View
Bushing
Bushing
Barrel Side
Wheel “Hubcap”
Side
Cap Nut
Cap Nut
Assembly
Tool
• Lift the front end of the vehicle.
• Align the hole in the steering wheel retainer’s end tab
with the screw peg on the underside of the vehicle body
and hold the steering wheel retainer in place. Make sure
the steering wheel retainer fits over the side ribs on the
vehicle body.
•From the underside of the vehicle body, insert a #8 x 3/4"
screw through the hole in the steering wheel retainer’s end
tab and into the screw peg on the vehicle body .Tighten
the screw with a Phillips screwdriver. Do not over-tighten.
•From the top side of the vehicle body, make sure the two
screw holes in the front of the vehicle body are aligned with
the holes in the steering wheel retainer. Insert two #8 x 3/4"
screws through the front of the vehicle body and into the
steering wheel retainer .Tighten the screws with a
Phillips screwdriver. Do not over-tighten.
• Lower the front end.
2
1
11
12
• Fit the steering wheel into the round hole in the steering
column.
• Press firmly to snap the steering wheel into the steering
wheel retainer.
• Fit the key into the hole in the vehicle body and press firmly
to snap it into the vehicle body.
Steering
Wheel
Retainer
End Tab Screw Peg
Side Rib
Side Rib
2
1
Steering Wheel
Steering
Column
Key
• Place the outer half of the door frame face down on a flat
surface. Make sure the handle is at the top.
• Fit the narrow bands on the rear left roll cage onto the outer
half of the door frame. Make sure that the large hole above
the roll cage shock is facing up.
Door Frame-
Outer Half
Handle
Shock
Left Roll Cage - Rear
Narrow
Bands
Large Hole
5

Assembly
13
14
15
16
• Angle the top inner door frame and fit the slots on the top
inner door frame onto the tabs on the outer door frame.
• Rotate the top inner door frame to close around the rear left
roll cage. Make sure the tabs are secured in the slots.
• Hold the door frame pieces together and insert 4 #8 x 3/4"
screws through the top inner door frame as shown.
• Tighten the screws with a Phillips screwdriver.
Do not over-tighten.
Door Frame-
Top Inner
Door Frame-
Bottom Inner
Door Frame-
Outer Half
Slots
Slots
Tabs
• Position the rear left roll cage as shown to align the
shock’s lock tabs with the keyed hole in the left side of
vehicle body.
Note: The door will swing freely!
• Fit the shock into the hole.
• Rotate the rear left roll cage towards the vehicle body
1/4turn and fit the long tab at the bottom of the rear left roll
cage bar into the corresponding slot in the side of the
vehicle body.
Slot
Long Tab
Left Side of
Vehicle Body
Keyed
Hole
Lock Tab
Shock
Left Roll Cage - Rear
• Fit the front left roll cage into the large round opening and
slot in the left side of the vehicle body.
• Insert a #8 x 3/4" screw into the vehicle body as shown.
• Tighten the screw with Phillips screwdriver.
Do not over-tighten.
Slot
Round
Opening
Left Roll Cage - Front
6
Tabs Door Frame-
Outer Half
• Angle the bottom inner door frame and fit the slots on
the bottom inner door frame onto the tabs on the outer
door frame.
• Rotate the bottom inner door frame to close around the
rear left roll cage. Make sure the tabs are secured in
the slots.
• Hold the door frame pieces together and insert 2 #8 x 3/4"
screws through the bottom inner door frame.
• Tighten the screws using a Phillips screwdriver.
Do not over-tighten.

17
• From the passenger compartment, insert two #8 x 11/2”
screws through the vehicle body and into the roll cage.
• Tighten the screws with a Phillips screwdriver.
Do not over-tighten.
Assembly
18
20
19
• Position the right roll cage as shown to align the shock’s
lock tabs with the keyed hole in the right side of the
vehicle body.
• Fit the shock into the hole.
• Rotate the right roll cage towards the vehicle body 1/4turn
and fit the long tabs at the bottom of the right roll cage into
the corresponding slots in the side of the vehicle body.
Long Tabs
Keyed Hole
Lock Tabs
Shock
Right Roll Cage
Right Roll
Cage
Left Roll
Cage
Light Bar
• Fit the ends of the light bar into the holes in the left and
right roll cages. Make sure the flat side of the lights face
the front of the vehicle.
Note: You may need to flex the roll cage sides slightly to fit
the light bar between them.
• Insert a #8 x 11/2” screw through the left and right roll
cages and into the ends of the light bar.
• Tighten the screws with a Phillips screwdriver.
Do not over-tighten.
7
Slots
Rear View
Top Inside View
• From the outside of the vehicle body, insert a #8 x 3/4”
screw into the vehicle body.
• From the passenger compartment, insert two #8 x 11/2”
screws through the vehicle body and into the roll cage.
• Tighten the screws with a Phillips screwdriver.
Do not over-tighten.
#8 x 3/4"
#8 x 11/2"

®
O
I
L
-
F
I
L
L
T
O
L
I
N
E
U
N
L
E
A
D
E
D
F
U
E
L
O
N
L
Y
FOG
TURBO
OIL AMP
SPEED(MPH)
TEMP
COOL HOT
• Wipe the areas where the labels will be applied with a clean,
dry cloth.
• Wash your hands before applying labels to the vehicle.
• Apply labels as indicated in the illustrations.
• Avoid repositioning a label once it has been applied.
Label Decoration
Fisher-Price, Inc., a subsidiary of Mattel, Inc.,
East Aurora, New York 14052, U.S.A.
©1999 Mattel, Inc. All Rights Reserved. .
Fisher-Price and X-treme Machine Jr. are U.S. trademarks of Mattel, Inc.
Bosch is a registered trademark of Robert Bosch Gmbh used under license.
Edelbrock trademark used under license from Edelbrock Corporation. Printed in U.S.A.
Champion trademark used under license from Champion Spark Plug Company. 72664pr-0920
If you have any questions about this product:
In Canada, call 1-800-567-7724, or write to: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2.
In Great Britain, telephone [phone].
In Australia, Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870,
Richmond, Victoria 3121 Australia. Consumer Advisory Service 1-800-800-812
(valid only in Australia).
Questions? We’d like to hear from you!
Call Fisher-Price®Consumer Affairs, toll-free at
1-800-432-KIDS, 8 AM - 5 PM EST Monday through
Friday. Hearing-impaired consumers using TTY/TDD
equipment, please call 1-800-382-7470. Or, write to:
Fisher-Price®Consumer Affairs, 636 Girard Avenue,
East Aurora, NewYork 14052
Care and Maintenance
• Periodically check all screws, retainers and protective
coverings and tighten as required. Check plastic pieces
on a regular basis for cracks or broken pieces.
• To clean or to remove static electricity, wash the vehicle
with a mild soap and water solution and soft cloth. Rinse
clean with water to remove soap residue and towel dry.
8
Top Inside View
Back View
Left Side View
®
Right Side View
9
22
3
13
13
20
17
5
19
14
14
14
4
18
21
12
10
10
7
7
8
8
1
16
6
15
11
9