Fisher-Price N5970 User manual

Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. PRINTED IN CHINA
©2008 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. N5968pr-0920
Care
• Wipe the toy with a clean cloth dampened with a mild soap and water solution. Do not immerse this toy.
• This toy has no consumer serviceable parts. Do not take this toy apart.
FCC Statement (United States Only)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
Note: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the
user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may
not cause harmful interference and (2) this device must accept any interference received, including interference that may
cause undesired operation.
ICES-003
This Class B digital apparatus complies with Canadian ICES-003.
Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device
must accept any interference received, including interference that may cause undesired operation.
NMB-003
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes: (1) il ne doit pas produire de brouillage et (2)
l’utilisateur du dispositif doit être prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible
de compromettre le fonctionnement du dispositif.

N5970
N5970
N5969
N5969
Each sold separately and subject to availability.
Please keep this instruction sheet for future reference,
as it contains important information.
Each requires three “AA” batteries (included).
Batteries included are for demonstration purposes only.
Adult assembly is required for battery replacement.
Tool required for battery replacement: Phillips screwdriver (not included).
This product is not recommended for use on loose dirt or wet surfaces.
N5968
N5968
www.fisher-price.com

2
In exceptional circumstances, batteries
may leak fluids that can cause a chemical
burn injury or ruin your product. To avoid
battery leakage:
• Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods of
non-use. Always remove exhausted
batteries from the product. Dispose of
batteries safely. Do not dispose of this
product in a fire. The batteries inside may
explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable
batteries.
• Remove rechargeable batteries from the
product before charging.
• If removable, rechargeable batteries are
used, they are only to be charged under
adult supervision.
• Protect the environment by not
disposing of this product with
household waste (2002/96/EC).
Check your local authority for
recycling advice and facilities
(Europe only).
Battery Safety
Information
Battery Replacement
• Locate the battery compartment door
on the bottom of the vehicle.
• Loosen the screw in the battery
compartment door with a Phillips
screwdriver. Remove the battery
compartment door. Remove the
exhausted batteries and throw
them away.
• Insert three, new "AA" (LR6)
alkaline batteries.
Hint: We recommend using alkaline
batteries for longer battery life.
• Replace the battery compartment door
and tighten the screw with a Phillips
screwdriver. Do not over-tighten.
• If this toy begins to operate erratically,
you may need to reset the electronics.
Slide the power switch off and then
back on.
• When sounds or motions become faint
or stop, it’s time for an adult to change
the batteries!
For best performance, we recommend
replacing the batteries that came with
this toy with three, new “AA” (LR6)
alkaline batteries.
1.5V x 3
"AA" (LR6)

3
Shake It, Then Race It!
• Set the car down and watch it go.
• When you're finished playing with this
toy, slide the power switch OFF .
3
• Slide the power switch on the bottom of
the vehicle ON
.
1
• Lift the car and shake it to start the
"engine" and the sound effects.
Hint: For maximum distance, shake the car
4 or 5 times. Shaking more than this does
not increase the distance it will travel.
2
CAUTION
Please keep small parts such
as the plastic tabs out of
children's reach. Throw the
plastic tab away.
Note: A plastic tab is attached to the toy for
in-store demonstration purposes. While the
tab may have already been removed, check
the toy to be sure. If the plastic tab is still
attached, pull and remove the tab from the
toy. Throw the plastic tab away.