Fisher-Price T5053 User manual

T5053
www.fisher-price.com
Please keep these instructions for future reference,
as they contain important information.
Requires three “AA” batteries (included) for operation.
Adult assembly is required for battery replacement.
Tool required for assembly: Phillips screwdriver (not included).

Battery
Replacement
• Protect the environment by not
disposing of this product with
household waste (2002/96/EC).
Check your local authority for
recycling advice and facilities
(Europe only).
For best performance, we recommend
replacing the batteries that came with
this toy with three, new “AA” (LR6)
alkaline batteries.
• Open the fasteners on the bottom of the toy.
• Loosen the screw in the battery
compartment door with a Phillips
screwdriver and remove the door.
• Remove the exhausted batteries and
throw them away.
• Insert three, new “AA” (LR6)
alkaline batteries.
Hint: We recommend alkaline batteries for
longer battery life.
• Replace the battery compartment door and
tighten the screw. Do not over-tighten.
Close the fasteners.
• If this product begins to operate erratically,
you may need to reset the electronics.
Slide the power/volme switch off, then
back on.
• When sounds from this toy become faint
or stop, it’s time for an adult to change
the batteries.
1,5V x 3
“AA” (LR6)
Battery Safety
Information
In exceptional circumstances, batteries
may leak fluids that can cause
a chemical burn injury or ruin your
product. To avoid battery leakage:
• Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods
of non-use. Always remove exhausted
batteries from the product. Dispose of
batteries safely. Do not dispose of this
product in a fire. The batteries inside
may explode or leak.
•
Never short-circuit the battery terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable
batteries.
• Remove rechargeable batteries from the
product before charging.
• If removable, rechargeable batteries are
used, they are only to be charged under
adult supervision.

Crib Attachment
WARNING
Prevent Entanglement Injury
The product may not attach
to all crib designs. Do not add
additional strings or straps to
attach to a crib or playpen.
IMPORTANT! If you are attaching this toy
to a crib side rail that can be lowered and
raised, make sure the crib side rail is in the
raised (locked) position whenever a child
is in the crib.
• Position the toy inside the crib.
• Tie the toy’s strings to the crib top rail.
Note: It is better to tie the strings in
a knot than a bow, since a bow may be
easily untied.
IMPORTANT! Always attach all provided
fasteners (strings, straps, clamps, etc.)
tightly to a crib or playpen according to
the instructions. Do not add additional
strings or straps to attach to a crib.
Check frequently.
Fun Music and Sounds
• Slide the power/volume switch to ON
with low volume , ON with high
volume or OFF .
• When baby bats or tugs at the toys,
lights activate, and music and fun sound
effects play.
Power/Volume Switch

Consumer Information
ICES-003
• This Class B digital apparatus complies
with Canadian ICES-003.
• Operation is subject to the following two
conditions: (1) this device may not cause
harmful interference and (2) this device
must accept any interference received,
including interference that may cause
undesired operation.
NMB-003
• Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
• L’utilisation de ce dispositif est autorisée
seulement aux conditions suivantes :
(1) il ne doit pas produire de brouillage et
(2) l’utilisateur du dispositif doit être prêt
à accepter tout brouillage radioélectrique
reçu, même si ce brouillage est susceptible
de compromettre le fonctionnement
du dispositif.
FCC Statement (United States only)
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and
can radiate radio frequency energy and,
if not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct
the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Consult the dealer or an experienced
radio/TV technician for help.
Note: Changes or modifications not
expressly approved by the manufacturer
responsible for compliance could void the
user’s authority to operate the equipment.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
Fisher Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. T5053pr-0920
©2009 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. PRINTED IN CHINA
Care
• Wipe this toy with a clean cloth
dampened with a mild soap and water
solution. Do not immerse this toy.
• This toy has no consumer serviceable
parts. Do not take this toy apart.