FitLogic MIRACLE R280 User manual

Read all the instructions carefully before
assembling and using this product. Retain this
owner’s manual for the future’s reference.
!

1
1. Plug the power cord of the treadmill directly into a dedicated grounded circuit.
This product must be grounded well. If it has breakdown, grounding provides a
path of least resistance for electric current to reduce the risk of electric shock.
2. Position the treadmill on a clean and flat surface with at least 2m*1m area.
Do not place the treadmill on thick carpet as it may interfere with proper
ventilation. Also, do not place the treadmill near water or outdoors.
3. Position the treadmill where the wall plug is visible and accessible.
4. NEVER start the treadmill while you are standing on the walking belt. After
turning the power on and adjusting the speed control, there may be a pause
before the walking belt begins to move, ALWAYS stand on the foot rails on the
sides of the frame until the belt is moving.
5. Wear appropriate clothing when exercising on the treadmill. Do not wear long,
loose fitting clothing that could become caught in the treadmill. Always wear
running or aerobic shoes with rubber soles.
6. Always unplug the power cord before removing the treadmill motor cover.
7. Keep small children away from the treadmill during operation.
8. Always hold the handrails when initially walking or running on the treadmill,
until you are comfortable with the use of the treadmill.
9. Always attach the safety pull pin rope to your clothing when using the
treadmill. If the treadmill should suddenly increase in speed due to an
electronics failure or the speed being inadvertently increased, the treadmill will
come to a sudden stop when the pull pin is disengaged from the console.
IMPORTANT SAFETY PRECAUTIONS

2
10. When the treadmill is not being used, the power cord should be unplugged
and the safety pull pin should be removed.
11. Before starting any exercise program, consult with your physician or health
professional. He or she can help to establish the exercise frequency, intensity
(target heart zone) and time appropriate to your particular age and physical
condition. If you have any pain or tightness in your chest, an irregular heartbeat,
shortness of breath, feel faint or have any discomfort while you exercise, STOP
IMMEDIATELY! Consult your physician before continuing.
12. If you observe any damage or wear on the mains plug or on any section of
the mains lead then please have these replaced immediately by a qualified
electrician –do not attempt to change or repair these yourself.
13. If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
14. Put your feet on the side rail before using the treadmill, and always attach
the safety pull pin rope to your clothing. Hold the handle bar before the running
belt moving well ( feel the running speed by your single foot before using it). To
avoid loss balance, please slow down the speed to the lowest or take off the
safety. And hold the handle bar to jump to the side rail when emergency or the
safety key is not attached.
IMPORTANT SAFETY PRECAUTIONS

3
When you open the carton, you will find the below spare parts:
Spare parts list:
NO.
DESCRIPTION
SPEC
QTY
NO.
DESCRIPTION
SPEC
QTY
1
CONSOLE MAIN FRAME
1
31
Right Bottom
Decoration Case
1
9
LEFT HANDLE BAR
1
86
BOLT
M8*16
8
10
RIGHT HANDLE BAR
1
90
BOLT
M8*35
2
16
ALLEN WRENCH WITH DRIVER
S=13, 14,
15
1
92
BOLT
M8*42
2
17
5#ALLEN WRENCH
5 mm
1
104
BOLT
M6*12
6
23
LEFT OUTTER COVER
1
107
SCREW
ST4.2*12
10
26
RIGHT OUTTER COVER
1
108
SCREW
ST4.2*13
8
30
Left Bottom Decoration
Case
1
122
4# ALLEN WRENCH
4 mm
1
Assembly tools：
Allen Wrench: 5mm 1pc, 4mm 1pc
Allen Wrench With Screw Driver :S=13、14、15 1pc
ASSEMBLY INSTRUCTIONS

4
Notice: Do not turn power on before assembly is done.
Step 1：
Step 2:
Step 3:
Open the carton，take out the
spare parts，and put the MAIN
FRAME on the ground.
Turn the computer and the
upright frame up.
Attention: Don’t press the
wires inside the upright
frame when folding. Hold
the computer and upright
frame to avoid dropping.
Use 5# Allen wrench, lock the
Left & right upright tubes (#3 &
#4) onto the Base main frame
with M8*16 Bolt (#86), and Arc
washer (#115).
Attention: Hold the left and
right upright tubes to avoid
dropping.
ASSEMBLY STEPS

5
Step 4:
Step 5:
Step 6:
Connect the Hand pulse wire.
Use 4# Allen wrench, lock the
Left and right handle bar
(#9,#10) onto the Upright
upper post (#3,#4) by M6*12
Bolt (#104).
Use 5# Allen wrench, turn the
Computer to the right position
according to the arrow direction
shown as the picture. Lock the
Console main frame (#1) onto
the Upright upper frame by
M8*35 Bolt (#90) and nut. And
then lock the bolt on the position
“A”.
Use Allen wrench with screw
driver, lock the Left & right
outer cover (#23,#26) onto
the Upright upper frame
(#3,#4) by screw 4.2*13
(#108).
Attention: Please fix the treadmill well according to the above steps, and
then go to the next step to assemble the plastic covers.

6
Step 7:
Put the Left and right bottom
decoration case (#30,#31)
onto the Base main frame
(#5), then lock them with
ST4.2*12 screw (#107) by
Allen wrench with screw driver.
Attention:Please don’t put the power on until you make sure that
all the above steps are finished and all the bolts are tightened
well. Please also read all the following instructions when you
operate the treadmill.

7
Folding up:
Releasing down:
FOLDING INSTRUCTION
Hold the place A, and pull up
the main frame up as the arrow
direction till you hear the sound
of the cylinder (#15).
Hold the place A, kick the
position B of cylinder (#15),
and push the running deck a
little bit, then the running deck
will drop down slowly.

8
TECHNICAL PARAMETER
BUILT UP
SIZE(mm)
1700*775*1350mm
FOLDABLE
SIZE(mm)
830*775*1580mm
RUNNING
BOARD(mm)
460*1320mm
NET WEIGHT
69KG
MAX USE’S
WEIGHT
120KG
SPEED
RANGE
1.0-20KM/h
INCLINE
LEVEL
0-15%
ONE
SMILE-SHAPE
LCD DISPLAY
WINDOW
SPEED,TIME,DISTANCE,CALORIES,PULSE
INCLINE

9
GROUND GUIDE
This product must be grounded. If it should malfunction or breakdown,
grounding provides a path of least resistance for electric current to
reduce the risk of electric shock. This product is equipped with a cord
having an equipment-grounding conductor and a grounding plug. The
plug must be plugged into an appropriate outlet that is properly
installed and grounded in accordance with all local codes and
ordinances.
DANGER –Improper connection of the equipment-grounding
conductor can result in a risk of electric shock. Check with a qualified
electrician or serviceman if you are in doubt as to whether the product
is properly grounded. Do not modify the plug provided with the product
–if it will not fit the outlet, have a proper outlet installed by a qualified
electrician. This product is for use on a nominal 120-volt circuit and has
a grounding plug that looks like the plug illustrated in sketch A in
following figure. Make that the product is connected to an outlet having
the same configuration as the plug. No adapter should be used with
this product.

10
WINDOW DISPLAY:
1.“INCL”window: Display the current incline level and the range is
0-15%.
2. “DIST.” Window: Display the exercise distance. Counting from 0:00
to 99:9, when it is over 99:9, the display will be reset to be 0:00 and
the counting will start again from 0:00 to 99:9. Counting from the
target distance down to 0:00, when it reaches 0:00, the speed of the
treadmill will also be slowly decreased. After the treadmill stops
completely, the unit will become STANDBY state.
3. “CAL.” window: Display the runner’s pulse and calories data.
Counting from 0 to 999, when it is over 999, the display will be reset to
be 0 and the counting will start again from 0 to 999. Counting from the
target data down to 0, when it reaches 0, the speed of the treadmill will
also be slowly decreased and finally “END” will be shown. After the
treadmill stops completely, the unit will become STANDBY state after 5
seconds.
OPERATION GUIDE

11
4. “TIME” window: Display the running exercise time. Counting from
0:00 to 99:59, when it reaches 99:59, the speed of the treadmill will
be slowly decreased and finally “END” will be shown. After the
treadmill stops completely, the unit will become STANDBY status.
Counting from the target data down to 0:00, when it reaches 0:00, the
speed of the treadmill will also be slowly decreased and finally “END”
will be shown. After the treadmill stops completely, the unit will
become STANDBY state after 5 seconds.
5. “SPEED” window: On setting status, it will display
“P1-P15-U1-U3-FAT”. On operation status, it will display the current
speed, and the speed range is 1.0-20KM/H(Kilometer) or
0.6-12MPH(Mile).
6. “PUL.” Window: When the user grasps the handle bar sensors, the
pulse data will be shown in the window, and the range is 50-200
times/min. (This data is just for reference, do not use it as the medical
data)
7. “PROFILE/LAPS” window: Display the program selected under
standby state; display standard racetrack position under running
state.
BUTTON FUNCTION:
1. “PROGRAM” Button: When the treadmill is under standby state,
press this button to choose the exercise time “0:00” or the following 19
operation modes of “P1-P2-P3-P4-P5-P6-P7-P8-P9-
P10-P11-P12-P13-P14-P15-U1-U2-U3-FAT” (FAT is the body fat
testing function). Manual mode is the default mode with speed 1.0
KM/H. (0:00 is manual model, P1-P15 is preset program and U1-U3 is
the user’s self-set program).
2. “MODE” Button: Press this button to choose the modes: “0:00”,
“15:00”, “1.0” and “50” (“0:00” is manual mode, “15:00” is the time
count-down mode, “1.0” is the distance count-down mode and “50” is
the calorie count-down mode). When you choose each mode, you can

12
press the speed button and incline button to set the target count-down
data, after that, press the START button to start the treadmill.
3. “START” button: When the power is on and the safety key is
attached onto the console, press this button at any time, it can start
the treadmill.
4、“STOP” button: While running the treadmill, press this button at any
time to stop the treadmill and return all the data back to 0.
5、“SPEED+”、“SPEED-” Button：After starting the treadmill, press
“SPEED” button to adjust the speed and the adjustment range of speed
is 0.1km each time. When pressing “SPEED” button for more than 0.5
seconds, the speed will be continuously increased or decreased.
6. “INC+”, “INC-”Button: After starting the treadmill, pressing
“INCLINE” button can adjust the level of incline and the adjustment
range of speed is 1 section each time. When pressing “INCLINE” button
for more than 0.5 seconds, the incline level will be continuously
increased or decreased.
7. “SPEED：2, 3, 5, 6, 8, 9, 10, 11” quick access button：you can do
quick setting of the speed.
8. “INCLINE：1, 3, 5, 7, 9, 11, 13, 15” quick access button: you can do
quick setting of incline.
9. When the treadmill is under standby state, press both SPEED+ and
INCLINE+ for about 3 seconds. You will hear the buzzer make a sound
“BI”, then the changes between Kilometer and Mile will be finished.
START-UP QUICKLY (MANUAL)
1. Put the power switch on, and then attach the safety key to the
computer.
2. Press START/STOP button，the system will enter into 3 seconds
count-down, the buzzer will make the sound “Bi” and the TIME window
will start to count down, then the speed will run 1.0km/hour after 3

13
seconds.
3. After start-up, you can use speed up or down to adjust the speed up
or down.
The operation of exercise process:
1. Press speed-down will decrease the running speed.
2. Press speed-up will increase the running speed.
3. Press incline-down will decrease the incline level.
4. Press incline-up will increase the running level.
5. Press PAUSE will reduce the speed until the treadmill stops.
6. When the user holds the hand pulse about 5 seconds, it will display
pulse data.
MANUAL MODE:
1. When the treadmill is under the standby state, press START button,
the treadmill will start to run from the speed 1.0km/h and the inline of
“0” level. The other windows will also start to count up from “0”, press
“INCLINE+”,”INCLINE-”, “SPEED+”, “SPEED-” to change the incline
and speed.
2. Set up the TIME, press “MODE” button to enter into time
count-down, the TIME window will display “15：00” and glitter. Press
“INCLINE+”,”INCLINE-”, “SPEED+”, “SPEED-” to set up the time that
you need. The setting range is 5:00-99:00.
3. In TIME setting mode, press “MODE“ button to enter into distance
count-down, the DISTANCE window will display “1.0” and glitter. Press
“INCLINE+”,”INCLINE-”, “SPEED+”, “SPEED-” to set up the distance
that you need. The setting range is 0.5—99.9.
4. To set up the CALORIES, press “MODE” button to enter into calories
count down, the CAL window will display “50’ and glitter. Press
“INCLINE+”,”INCLINE-”, “SPEED+”, “SPEED-” to set up the calories
that you need. The setting range is 10-999.

14
5. When setting is finished, press “START” button to start up, the
treadmill will run after 3 seconds, press “INCLINE+”,”INCLINE-”,
“SPEED+”, “SPEED-” to adjust the speed and the incline; press the
PAUSE, the treadmill will stop.
PRESET PROGRAMS:
This treadmill has 15 preset programs. Under the standby status,
press “PROGRAM” button, the window of “SPEED” will P1-P15. After
choosing the program that you need, the TIME window will flash and
display the preset time10:00, press “INCLINE+”,”INCLINE-”, “SPEED+”,
“SPEED-” to set up the exercise time that you need. Press “START”
button to start the preset program. The preset program is divided into
10 sections. Each exercise time=the setting time/10. When the system
enters into the next section, it will make 3 sound “Bi—Bi—Bi“, then the
speed and the incline will be changed according to the setting speed
and incline of the program, then press “INCLINE+”,”INCLINE-”,
“SPEED+”, “SPEED-” to change the INCLINE and SPEED as you need.
When the program enters into the next section again, the system will
make 3 sound “Bi—Bi—Bi“, then the speed and the incline will become
the speed and the incline of the preset program automatically. After
the program is completed, the system will make 3 sound “Bi—Bi—Bi”,
and the treadmill will decrease the speed slowly to END. After 5
seconds, the treadmill will become standby state.

15
PROGRAM CHART:
Each program will divide into 10 sections for the exercise time and
each time section has it’s speed and incline accordingly.
Mode
Time
Form 1:TIME INTERVAL(kilometer)
1
2
3
4
5
6
7
8
9
10
P1
SPEED
2
4
3
4
3
5
4
2
5
3
INCLINE
1
2
3
3
1
2
2
3
2
2
P2
SPEED
2
5
4
6
4
6
4
2
4
2
INCLINE
1
2
3
3
2
2
3
4
2
2
P3
SPEED
2
5
4
5
4
5
4
2
3
2
INCLINE
1
2
2
3
1
2
2
2
2
1
P4
SPEED
3
6
7
5
8
5
9
6
4
3
INCLINE
2
2
3
3
2
2
4
6
2
2
P5
SPEED
3
6
7
5
8
6
7
6
4
3
INCLINE
1
2
4
3
2
2
4
5
2
1
P6
SPEED
2
8
6
4
5
9
7
5
4
3
INCLINE
2
2
6
2
3
4
2
2
2
1
P7
SPEED
2
6
7
4
4
7
4
2
4
2
INCLINE
4
5
6
6
9
9
10
12
6
3
P8
SPEED
2
4
6
8
7
8
6
2
3
2
INCLINE
3
5
4
4
3
4
4
3
3
2
P9
SPEED
2
4
5
5
6
5
6
3
3
2
INCLINE
3
5
3
4
2
3
4
2
3
2
P10
SPEED
2
3
5
3
3
5
3
6
3
3
INCLINE
4
4
3
6
7
8
8
6
3
3
P11
SPEED
3
5
8
8
9
5
7
6
3
2
INCLINE
4
5
6
6
9
9
10
12
6
3
P12
SPEED
2
5
5
4
4
6
4
2
3
4
INCLINE
3
5
6
7
12
9
11
11
6
3
P13
SPEED
2
7
4
7
8
9
4
5
3
2
INCLINE
5
6
6
4
6
5
8
9
4
2
P14
SPEED
2
6
5
4
8
6
5
2
3
3
INCLINE
5
6
5
8
4
5
5
10
6
3
P15
SPEED
2
6
5
4
8
7
5
3
3
2
INCLINE
3
4
5
6
3
5
5
6
4
3

16
Mode
Time
Form 2:TIME INTERVAL(mile)
1
2
3
4
5
6
7
8
9
10
P1
SPEED
1.2
2.4
1.8
2.4
1.8
3.1
2.4
1.2
3.1
1.8
INCLINE
1
2
3
3
1
2
2
3
2
2
P2
SPEED
1.2
3.1
2.4
3.7
2.4
3.7
2.4
1.2
2.4
1.2
INCLINE
1
2
3
3
2
2
3
4
2
2
P3
SPEED
1.2
3.1
2.4
3.1
2.4
3.1
2.4
1.2
1.8
1.2
INCLINE
1
2
2
3
1
2
2
2
2
1
P4
SPEED
1.8
3.7
4.3
3.1
4.9
3.1
5.5
3.7
2.4
1.8
INCLINE
2
2
3
3
2
2
4
6
2
2
P5
SPEED
1.8
3.7
4.9
3.1
4.9
3.7
4.3
3.7
2.4
1.8
INCLINE
1
2
4
3
2
2
4
5
2
1
P6
SPEED
1.2
4.9
3.7
2.4
3.1
5.5
4.3
3.1
2.4
1.8
INCLINE
2
2
6
2
3
4
2
2
2
1
P7
SPEED
1.2
3.7
4.3
2.4
2.4
4.3
2.4
1.2
2.4
1.2
INCLINE
4
5
6
6
9
9
10
12
6
3
P8
SPEED
1.2
2.4
3.7
4.9
4.3
4.9
3.7
1.2
1.8
1.2
INCLINE
3
5
4
4
3
4
4
3
3
2
P9
SPEED
1.2
2.4
3.1
3.1
3.7
3.1
3.7
1.8
1.8
1.2
INCLINE
3
5
3
4
2
3
4
2
3
2
P10
SPEED
1.2
1.8
3.1
1.8
1.8
3.1
1.8
3.7
1.8
1.8
INCLINE
4
4
3
6
7
8
8
6
3
3
P11
SPEED
1.8
3.1
4.9
4.9
5.1
3.1
4.3
3.7
1.8
1.2
INCLINE
4
5
6
6
9
9
10
12
6
3
P12
SPEED
1.2
3.1
3.1
2.4
2.4
3.7
2.4
1.2
1.8
2.4
INCLINE
3
5
6
7
12
9
11
11
6
3
P13
SPEED
1.2
4
3.1
4
4.8
5.5
3.1
3.7
1.8
1.2
INCLINE
5
6
6
4
6
5
8
9
4
2
P14
SPEED
1.2
3.7
3.7
3.1
5.5
4.8
3.7
1.2
1.8
1.8
INCLINE
5
6
5
8
4
5
5
10
6
3
P15
SPEED
1.2
3.8
3.1
3.1
5.5
4
3.1
1.8
1.8
1.2
INCLINE
3
4
5
6
3
5
5
6
4
3
USER PROGRAM:
U1, U2, U3: Besides the 12 preset programs, you can also set up
another 3 user’s programs for user’s programs as your need: U1, U2,
U3.
1. User’s programs setting:
Press the button “PROGRAM”until it shows the user’s program (U1-U3),

17
then press the “MODE”to enter into the setting. For the first section,
press “SPEED+”, “SPEED -”to change the speed, and press
“INCLINE+”, “INCLINE -”to change the incline. Press “MODE” to
complete the setting of the first section and also go to the setting of the
next section till all the 10 sections are completed. The setted data will
be saved without losing due to the power off until next time when you
reset it.
2. Start-up of the user’s program:
Under the standby state, press “PROGRAM”until it shows the user’s
program (U1-U3), set the running time that you need and press the
“START” button for starting the treadmill.
3. User’s program set-up explanation:
Each user’s program divides time to be ten sections, the treadmill can
only be started after the speed and the incline are set well for the 10
sections and the running time can also be set well.
Range of programs:
SETTING CONTENT
BEGINNING
SETTING OF
BEGINNING
SET-UP
RANGE
DISPLAY
RANGE
TIME(MIN:SECOND)
0:00
15:00
5:00-99:00
0:00－99:59
INCLINE(%)
0
0
0-12
0-12
SPEED(K/h)
1.0
1.0
1.0-16
1.0-16
DISTANCE(K)
0
1.0
0.5-99.9
0.00－99.9
PULSE(hypo/min)
P
N/A
N/A
50-200
CALORIE(THERM)
0
50
10-999
0－999
BODY TESTER:
At the beginning state, press “ PROGRAM” continually to enter into the
body FAT tester, press “ MODE “ enter F-1, F-2, F-3, F-4, F-5 (F-1 SEX,
F-2 AGE, F-3 HEIGHT, F-4 WEIGHT, F-5 FAT TESTER), Press “SPEED+”,
“SPEED -” to set F-1 - F-4 ( refer to the following chart), after that,
press “ MODE” to set F-5, then grasp the hand pulse, the window will
display your body quality index after 3 seconds. The body quality index
is to test the relation between height and weight, not referring to the
body proportion. The body FAT suits for any male and female, offering

18
reference information of adjusting people’s weight. The ideal FAT
should be 20-25, if under 19, it means too thin. If between 25 and 29,
it means overweight, if over 30, it means obesity. (The data is just for
reference, can not be used as medicinal data).
F-1
Seg
01 male
02 female
F-2
Age
10------99
F-3
Hight
100----200
F-4
Weight
20-----150
F-5
FAT
≤19
Underweight
FAT
=(20---25)
Normalweight
FAT
=(25---29)
Overweight
FAT
≥30
Obesity
Safety lock function:
Pull out the safety pulling rope, then the treadmill will stop immediately.
All the windows display“―――”，the buzzer will make 3 sound “Bi-Bi-Bi”,
and the treadmill become stopped. Attach the magnet end of the
safety lock to the console, the treadmill will be at the beginning of
running.
Save on power function:
The system is with SAVE-ON power function.Under the standby state,
without operating the treadmill for 10 minutes, the SAVE-ON power
function will be available, and the display will be closed up. You can
press any button to re-wake up the display.
MP3(Option):
When Mp3 is connected, the console is able to play music. The volume
is controlled on the Mp3. Please pay attention to adjust the volume
properly for having better timbre and protecting the inner
voice-frequency circuit.
Turn off:
Turn off the power: You can turn off the power to stop the treadmill, so
that the treadmill won’t be damaged at any time.

19
Caution:
1. We recommend that you maintain a slow speed in the beginning of
exercise and hold on the handrails until you become comfortable
and familiar with the treadmill.
2. Attach the magnet end of the safety lock to the console and also
attach the clip of the safety pulling rope to your clothing.
3. To end your workout safely, press the PAUSE button or pull out the
safety pulling rope, then the treadmill will stop immediately.