FitLogic YK-ET1403A User manual

INSTRUCTIONMANUAL
PLEASEREADTHISMANUALCAREFULLYBEFOREUSINGANDSAVEITFORFUTUREREFERENCE.

1
[入文档的引述或关注点的摘要。您可将
文本框放置在文档中的任何位置
。
请使用
CONTENT
SafetyPrecautions------------------------------------------------------------------------------------------------------------------------- 2
AssemblySteps-----------------------------------------------------------------------------------------------------------------------------4
Folding Steps -------------------------------------------------------------------------------------------------------------------------------- 7
TechnicalData-------------------------------------------------------------------------------------------------------------------------------8
OperationInstruction-----------------------------------------------------------------------------------------------------------------------9
InstructionsforUse -----------------------------------------------------------------------------------------------------------------------14
Maintenance --------------------------------------------------------------------------------------------------------------------------------17
ExplosiveDrawing ------------------------------------------------------------------------------------------------------------------------18
Part List --------------------------------------------------------------------------------------------------------------------------------------19

2
[入文档的引述或关注点的摘要。您可将
文本框放置在文档中的任何位置
。
请使用
SafetyPrecautions
Thankyou forpurchasing thistreadmill,ithas been designedandmanufactured togiveyou manyyearsoftrouble
free service.You mayalreadybe familiarwithusing asimilarproductbutplease takethe timetoread these
instructions which havebeen written toensurethat you get the verybest from your purchase.
Warnings
1.Toreducethe riskofserious injury, read the followingimportant warnings beforeusingthe treadmill.
2.Beforestartinganyexercise programyou shouldconsultyourdoctortodetermine ifyou haveanyphysicalor
healthconditions thatcouldcreatearisktoyourhealthandsafety,orpreventyou fromusingthe treadmill
properly.Yourdoctor sadvice isessentialifyou aretaking medicationthataffectsyourheart rate,blood
pressureor cholesterollevel.
3.Beawareofyourbodyssignals.Incorrectorexcessiveexercise can damageyourhealth.Stop exercising if
you experienceanyofthefollowingsymptoms:Pain,tightness inyourchest,irregularheartbeat, extreme
shortnessofbreath,feeling light-headed,dizzyornauseous.Ifyou do experienceanyoftheseconditions
you shouldconsult your doctor beforecontinuingwithyour exerciseprogram.
ElectricalSafetyPrecautions
Failuretoobservethe following warnings mayincrease the riskofanelectricshockand personalinjury.
1.Alwayscheckthe powercablefordamage priortouse.Ifanydamageisobserved,do NOTuse the power
cable.
2.Never touch the power cablewithwet hands.
3.Positionthe power cablesothat it cannot be walkedon or pinched.
4. Onlythe suppliedpower cableshouldbeusedwiththe treadmill.
General SafetyPrecautions
1.Use the treadmill onlyinthe waydescribed inthisinstructionbook.
2.Ensurethat the voltage ofthe electricalsupplyisthesameas that indicated onthe power cable.
3.It isthe responsibilityofthe ownertoensurethatallusersofthe treadmill areadequatelyinformed ofall
warnings and safetyprecautions.
4.The treadmill isheavy andshouldbe removed fromthe packagingand assembled bytwopeople.
5.Beforeassembling the treadmill,make surethatitisnotplugged intoanyelectricalsource,such as awall
socket.
6.Use thetreadmill on asolid,flatlevelsurfacewithaprotectivecoverforyourfloororcarpet. Position the
treadmill withat least 2metersx1meter offree space behind thetreadmill.

3
[入文档的引述或关注点的摘要。您可将
文本框放置在文档中的任何位置
。
请使用
7.Keepthe treadmillawayfromexcessivemoistureanddust.
8.Beforeusingthe treadmill, checkthe nutsand boltsaresecurelytightened.
9.The safetylevelofthe treadmillcanbe maintainedonlyifitisexamined regularlyfordamage and wear.
Replace defectivecomponentsimmediately, do not use the treadmilluntil theyhavebeen replaced.
10.The treadmill has beentested andcertified toEN957under class H.C. Suitablefor domestic, homeuse only.
Maximumweight ofuser: 115kg/250lbs.
11.Braking iscontrolled bythe belt rotation power supply.
12.The treadmill isnot suitablefor therapeuticuse.
13.Keepchildren andpetsawayfromthe treadmill.Thetreadmill isdesigned foradult use only.
14.Wearsuitableclothing whilstusing the treadmill.Avoidwearing loose clothingwhich maygetcaughtinthe
treadmill or clothing thatmayrestrict or prevent movement.
15.Donot archyour backwhen using the treadmill; alwaystrytokeep your backstraight.
16.Ifyou feelpainor dizziness whileexercising, stop immediatelyand cooldown.
17.The pulsesensorisnotamedicaldevice.Severalthings including usermovement, mayaffectthe accuracy
ofthe sensor.The sensorisintendedonlyas an exercise aidindetermining generalheart ratetrends.
18.Caremustbe taken whenlifting ormoving thetreadmill so as nottoinjureyourback.Alwaysuse proper
lifting techniques and/or use assistance.
19.Asafekeyissuppliedforpersonalsafety.Use the safekeywhen operating thetreadmill forthe emergency
dismount function. Inthe event ofan emergency, place bothhandson the handlebarsandput yourfeet onto
the non-slipsurfaceofthe mainframe.Asyou dothis,the safekeywill disengage fromthe computerandthe
emergencydismount function will be triggered.
20.Allmoveableaccessoriesrequireweeklymaintenance.Checkthembeforeuse everytime.Ifanythingis
broken orloose,please fixitimmediately.You maycontinueusingthe treadmill afteranydamaged parts
havebeen fixed.
21.The treadmillisnottobeused bychildrenorpersons withreduced physical,sensoryormentalcapabilities,
or lackofexperienceand knowledge, unless theyhavebeen given adequatesupervision orinstruction.
22.Supervised children usingthe treadmillmust not beallowed toplaywiththe treadmill.
23.Thismachinemust be wellearthed. It can decreasethe danger ofelectricshock.

4
[入文档的引述或关注点的摘要。您可将
文本框放置在文档中的任何位置
。
请使用
AssemblySteps
The following arethe part when you open the package.
Packagelist:
NO.
Description Specification QTY
NO.
Description SpecificationQTY
1 mainframe 1 4 leftcolumn 1
55
serrated washer 8 10
5 rightcolumn 1
39
Inner hexpan headbolt M8×15 10
22
display 1
11
crosssolidwrench S=13 14 15 1 33
leftcolumncover 1
12
5# inner hexwrench 5mm 1
34
rightcolumncover 1
Assemblytools:
5# innerhexwrench5mm 1pcs
cross solidwrenchS=1314 15 1pcs
Attention:please don`t switchon beforefinishassembling.

5
[入文档的引述或关注点的摘要。您可将
文本框放置在文档中的任何位置
。
请使用
Step1:
Step2:
Step3:
1. Open the packageandput the mainframeon
the floor.
2. Please fixthe left &right column （4），（ 5）
tothe mainframewithpart(39)and(55). And
then connecttrunkcablewiththe lower-cable
please.
3.Fasten the display(22)tothe left &right
columnwithpart (39)and (55). And then
connect the displaycablewiththe trunkwire.

6
[入文档的引述或关注点的摘要。您可将
文本框放置在文档中的任何位置
。
请使用
Step4:
4.Fixthe left and rightcolumncover(33)\
(34)tothe column.
ATTENTION Pleaseconfirm completeassemblyas therequireaboveand lockall
thebolt.Dothefollowingoperation afterchecking everything isOK.Beforeyou use
thetreadmill, pleasereadtheinstruction carefully.

7
[入文档的引述或关注点的摘要。您可将
文本框放置在文档中的任何位置
。
请使用
FoldingSteps
Whenfolding:
Unfolding:
Holdthe Apositionand kickthe bumperB
and then pullit downautomatically.
Holdthe running deckwhich showed in “A”
position and then pushitinthe arrow
direction untilyou heara “bang”voice from
the bumperB.

8
[入文档的引述或关注点的摘要。您可将
文本框放置在文档中的任何位置
。
请使用
Technical Data
Assemblysize(mm) 1580×707×1240 Power 1.5HP
Folding size(mm) 960×707×1410 Maxoutput 2.0HP
Runningarea(mm) 1220×400 Inputcurrency 5.0A
N.W. 47.5KGS Speed range 0.8--12km/h
Incline N/A Maxloading 100KG
LED window speedtimedistancecalorie pulse

9
[入文档的引述或关注点的摘要。您可将
文本框放置在文档中的任何位置
。
请使用
Operation Instruction
1.WindowDisplay
1) “CAL”window: Displaytheexercisingcaloriedatafrom0to999.Whenusethecountdownmodethe data
willcountfrom the target datadownto0.0until themachine stop slowly,after5secthe machinewillgoto
standbymode.
2) “TIME”window: displaythe exercising timefrom0:00to99:59.When use thecountdownmode the data
willcountfrom the target datadownto0.0until themachine stop slowly,after5secthe machinewillgoto
standbymode.
3) “PULSE”window: displaythe dataofthepulse from50 to200(justforreference and cannotbe used for
medical). Whenusepulsefunction, pleaseholdthe handlebar pulse for at least 5sec.
4) “SPEED”window: displaythe exercisingspeed from0.8to12 km/h.inprogram mode itshowsP1-P9and
insettingmodeit showsH1-H3
5) “DIS.”window: displaythe exercising distance from0.00-99.9.Whenusethe countdownmode the data
will countfrom the targetdatadownto0.0until the machine stop slowly.It will go tostandbymodeafter5
sec.
2.Button Function:
1) “PROGRAM”keywhich isfor choosing programfromP1-P9. “0.8”issystemdefault mode.
2) “MODE”keywhich isforchoosing differentmode : “0.8”“H-1”“H-2”“H-3”( “0.8”issystemdefaultmode,
“H-1”istimecountdownmode, “H-2”isdistance countdownmode, “H-3”iscaloriecountdownmode). You

10
[入文档的引述或关注点的摘要。您可将
文本框放置在文档中的任何位置
。
请使用
can changethe databypressing “-SPEED+”and then press the “START”key.
3) “START”keywhich isforactivating the machine.You can start the machine anytimewhen the machineis
switchedon andthe safetykeyisincorrect position.
4) “STOP”keywhichisfor stopping the machine working and reset the machine tozero.
5) “SPEED+”“SPEED-”whichisforchanging the speed.Insetting modeitcan changethe targetdataand in
normalworking modeitcan change the speedby0.1km/hpertime.Whenyou press the “SPEED+”
“SPEED-”keylasting for 0.5sec the speed datawillchange continuously.
6) “SPEED：2.4.6.8.10.12”keywhich isfor choosing the speed directly.
3.Start-up Quickly(Manual)
1)Switch onand put the safetykeyincorrect position.
2)Press the STARTkeyand then the machine willworkataspeed of0.8km/hafterthe beepercountdown
from3to1.
3)Press the “SPEED+”、“SPEED-”tochangethe speed according toyour need.
4.Working Operation:
1)Press the “SPEED+”、“SPEED-”keytoincreaseor decreasethe speed.
2)You can changethe speeddirectlybypressing the speedkey “2.4.6.8.10.12”.
3)Pressingthe STOPkeytostop the machine fromworkingand reset the datatozero.
4)The pulsewindow willdisplayyour heart ratebyholdingthe handlepulse for 5sec end.
5.Manual Mode:
1)Press the STARTkeyand then the machinewillworkataspeed of0.8km/handall otherwindowwill count
from0instandbymode. Press the “SPEED+”、“SPEED-”tochange the speed.
2)Instandbymode press the MODEkeytoenterintotimecountdownmodeH1. “10:00”willbe flashed
displaying inthe TIMEwindow.Pressthe “SPEED+”、“SPEED-”keytochange the datafrom5:00 to99:59.
3)Intimecountdownmodepress the MODEkeytoenterintodistance countdownmode H2. “1.00”willbe
flasheddisplaying inthe DISwindow. Press the “SPEED+”、“SPEED-”keytochange the datafrom0.5to
99.9.
4)Indistance countdownmode,pressthe MODE keytoenterintocaloriecountdownmodeH3, “50”will be
flasheddisplaying inthe CALwindow. Press the “SPEED+”、“SPEED-”keytochange the datafrom10 to
999.
5)Choose oneofthe three countdownmode and then press the STARTkeyandthe machine willworkafter3
sec.press the “SPEED+”、“SPEED-”keytochange the speed.Pressthe STOPkeytoshutoffthe
machine.

11
[入文档的引述或关注点的摘要。您可将
文本框放置在文档中的任何位置
。
请使用
6.Built-inProgram
Therearetotal9programsbuiltinthemachine.Press the PROGRAMkeytochoose yourfavoriteprogram
formP1-P9.Press “SPEED+”“SPEED-”tochangethe presettime.Press theSTARTkeytostart the built-in
program.Thereare10stages ineach programand each exercising time=preset time/10.Therewillbe abeep
soundwhen enteringnextstages. The speedwillchange according toeach stage. You can changethe speed
bypressing “SPEED+”“SPEED-”keyduringeach stage.Butwhen enterintonextstage the speed willbackto
itsoriginaldata.Therewillbe 6bi-bisoundswhen finish exercising aprogramuntil the machinestop working
slowlyand the machine will go backtostandbymodeafter 5sec.
7.ProgramIntroduction:
SPEED standsfor speedand each programwill be dividedinto10 stages andeach stage will haveaconstant
speed.
Formulatable
8.DisplayRangeofEachItem:
item initial Originaldata Range Displayrange
time（min：sec）0:00 10:00 5:00-99:00 0:00-99:59
speed（km/h）0.8 0.8 0.8-12 0.8-12
distance（km）0.00 1.00 0.50-99.9 0.0-99.9
Heart rate（time/min）P / / 50-200
calorie(K) 0 50 10-999 0-999
9.BodyFatTest:
Press the PROGRAMkey continuouslytoenterintobodyfatindex function.And then press MODEkeyto
stage
formula
Presettime/10=eachexercisingtime
1 2 3 4 5 6 7 8 9 10
P1 SPEED 3 3 6 5 5 5 4 4 4 3
P2 SPEED 3 3 4 4 5 5 5 6 6 4
P3 SPEED 3 3 5 6 7 8 6 4 3 3
P4 SPEED 3 6 6 6 8 8 8 3 3 3
P5 SPEED 2 5 6 7 8 8 7 7 3 3
P6 SPEED 2 10 10 8 8 7 6 3 2 2
P7 SPEED 3 4 5 6 7 8 7 6 4 3
P8 SPEED 3 8 6 9 8 8 8 3 10 3
P9 SPEED 2 4 6 8 8 8 7 7 3 3

12
[入文档的引述或关注点的摘要。您可将
文本框放置在文档中的任何位置
。
请使用
enterintoF-1、F-2、F-3、F-4、F-5(F-1sex,F-2age,F-3height, F-4,weight, F-5bodyfattest), press
“SPEED+”、“SPEED-”tochange the dateofF1-4and afterthatpress MODEtoenterintoF-5bodyfatand
meanwhileholdthe handlepulse for2-3sec,itwilldisplayyourbodyfat. Body fatissuitablebothformaleand
female.Perfectbodyfatdataisbetween20 and 25.Ifbelow19itmeans you aretoo thin.Ifthe bodyfatdatais
between 25-29thatitmeans you arealittlefat. Ifabove30 thatmeans youaretoo fat. (the dataisjustfor
reference not suitableformedicaluse.)
F-1 Sex 01 male 02 female
F-2 Age 10------99
F-3 Height 100----200
F-4 Weight 20-----150
F-5
Bodyfat data ≤19 Alittle thin
Bodyfat data =(20---25) Normal
Bodyfat data =(26---29) Alittle fat
Bodyfat data ≥30 Too fat
10.EnergySaving Mode:
Thissystemisofenergysaving function.It will enterintoenergysaving mode after10 minuteswithoutany
signals. Press anykeycanawakeit.
11. MP3 Function (optional):
Switch on and connecttheMP3andnowthe machine isofloud speakerfunction.Please payattentiontothe
voice volumeinorder not todamage thespeaker equipment.
12.SafetyKeyFunction:
Pull outthe safetykeytomake the machineemergencystop atanytimeand meanwhileeach windowwill
show “---”and the beeperwill haveasoundalarm.You cannotdo anyoperationatthistime.Putthe safetykey
incorrect position and thenthe machine will gotostandbymode immediately.
13.Switchoff:
You can shut offthe machine byswitch offthe power anytime.And thiswon`t do anydamagetothe machine.
14.Attention:
1)Please checkthepower and the safetykeyiswellor not.
2)Ifanyaccident happened duringexercising, please pullout the safetyimmediatelyuntil it stop.
3)Ifthereissomething wrong withthe machine,please connectthe retaileras soon as possible.It`snot
allowed torepair the equipment bynon-specialperson.
15.SimpleMalfunction and Solution:
1)Switched on but without anysignalon the display.
A.Checkthe overload protection isworkor not, if so, press it down.

13
[入文档的引述或关注点的摘要。您可将
文本框放置在文档中的任何位置
。
请使用
B.Checkthe switch, overloadprotection and thecablebetween thedriver and thevoltagetransformer
areokor not and makesurethe connectionisgood.
C.Checkthe connection between the driver and display isokor not and.
D.The voltage transformerisbroken, replace thetransformer.
2)The displayshowsE01 after switch on.
A.Theresomethingwrongwiththe signalcable.Please checkeach cablebetween displayandthe
driver isokor not.
B.Therearesomethingwrongwiththe displaycomponent part, please replacethe display.
C.Replace the transformer.
3)The displayshowsE02 after switch on.
A.Checkthe motorcableisokornot, if notpleasereconnectthe motorcable.Ifitdoes notwork,
please replacethe motor.
B.Checkthe controller whether thereisanyspecialsmell. Ifso please replace the controller.
C.Checkwhether the input voltageiscorrect or not. Please use the right input voltage.
4)The displayshowsE03 after switch on.
A.Ifthe displayshowsE03 afterthemotorstartsforabout5-8sec,thatmeansitdoes notreceived
speedsignal. Please checkthe senor plug isokor not, if brokenpleasereplacethe sensor.
B.The circuit ofthe controller isbroken, please replacethe controller.
5)The displayshowsE05 after switch on.
A.The currencyistoo bigbecause oftoo heavy load and then the systemshutoffthe powertoprotect
itself. Please reset the machine.
B.Maybe somepart isjammed which make the motortoo heavy load,so the machinecannotwork.So
please adjust the running belt or lubricatesomeoil.
C.Checkthe motor whether thereisanyspecialsmell.Ifso please replace the motor.
D.Checkthe controller whether thereisanyspecialsmell. Ifso please replace the controller.
6)Cannotstart timewindowshowsnormallybutthemotordoesnotworkandthereisanyerrorcode after
press STARTkey.
A.Checkthe cablesbetweenmotor and related partsareokor not.
B.Checkwhether the protectivetube isgood or not.
C.The IGBTonthe controller isbroken, please replaceit.

14
[入文档的引述或关注点的摘要。您可将
文本框放置在文档中的任何位置
。
请使用
InstructionsforUse
Conditioning Guidelines:
The followingguidelineswillhelpyou toplanyourexercise program.Rememberthatcorrectnutrition and
adequaterest areessentialfor successfulresults.
Ifyou rebeginning an exercise program, you shouldcheckwithyour doctor if:
lYou havebeen diagnosedwithheart problems, highbloodpressureor anyother medicalcondition.
lYou havenot exercised for over ayear.
lYou areover 35 and do not currentlyexercise.
lYou arepregnant.
lYou havediabetes.
lYou havechest pains, or experience dizzinessor faintingspells.
lYou arerecoveringfromaninjuryor illness.
TargetHeartRate(THR):
TRAININGZONE
AGE MIN-MAX (BPM)
20 133 - 167
25 132 - 166
30 130 - 164
35 129 - 162
40 127 - 161
45 125 - 159
50 124 - 156
55 122 - 155
60 121 - 153
65 119 - 151
70 118 - 150
75 117 - 147
80 115 - 146
85 114 - 144
Note: Thisisaguide onlyand performance willdepend on thefitness and condition (health)ofthe person using
the treadmill.
Work-OutTips:
•Alwaysperformstretchingexercises bothbeforeandafter your work-out. Seepage 11.
•Start slowly, doingtoo much too sooncan lead toinjuries.
•Ifyou aresoreor tired, giveyourselfafew extradaystorecover.
•Start withtwoor three 15 minutesessionsper weekwitharest daybetween work-outs.

15
[入文档的引述或关注点的摘要。您可将
文本框放置在文档中的任何位置
。
请使用
•Warm-up for5or10 minutes withgentlemovementslikewalkingorswingingyourarmsinacircleand then
stretch the muscles you lluse duringyourwork-out. The treadmillwill mainlyexercise thethigh and calf
muscles.
•Increase thepace andresistance toslightlyharderthan comfortableand exercise foraslong asyou can.You
mayonlybe abletoexercise forafewminutesatatime,butthatwillchange quicklyif you exercise regularly.
•End each work-outwitha5minutecooldownwiththe resistance settoalowlevel.You shouldthen stretch
the muscles you vejust worked toprevent injuryandcramp.
•Increase yourwork-outtimebyafew minuteseachweekuntil you can workcontinuouslyfor30 minutes per
session.
•Don t worryabout distanceor pace. For the first fewweeks, focus on endurance and conditioning.
Howhardshouldyouwork?
1.Whenexercising, you shouldtrytostaywithinyourTarget Heart Rate(THR) zone.
2.The THRtablewill tellyou the THR foryourage.Thisisonlyaguide andwill dependon the fitnessand
condition(health) ofthe person usingthe treadmill.
3.Alwaysbe awareofhow you feelwhen you exercise. If you feeldizzyor light- headed, stop immediatelyand
rest. Ifyou renot breakingintoasweat, speedit up!
Stretching Guide
Tipsfor Stretching:
•Beginwithgradualmobilityexercises ofall the joints, i.e. simplyrotatethe wrists, bend the armandrollyour
shoulders.Thiswill allow the bodysnaturallubrication (synovialfluid) toprotect the surfaceofthe bonesat
these joints.
•Alwayswarmup the bodybeforestretching, as thisincreases bloodflow aroundthe body, which inturn
makes the muscles moresupple.
•Start withyour legs, andworkupthe body.
•Eachstretch shouldbeheldfor at least 10 seconds (working upto20 to30 seconds) and usuallyrepeated
about 2or 3times.
•Donot stretch until it hurts. Ifthere sanypain, ease off.
•Don t bounce.Stretching shouldbe gradualandrelaxed.
•Don t holdyour breathduring astretch.
•Stretch afterexercisingtopreventmuscles tightening up.Stretchatleastthree times aweektomaintain
flexibility.

16
[入文档的引述或关注点的摘要。您可将
文本框放置在文档中的任何位置
。
请使用
InnerThigh Stretch:
•Sit withthe soles of
your feet together and
your knees outward.
Pull your feet toward
your groinarea asfar
as possible.
•Holdfor about 10
seconds.
CalfStretch:
•Standwiththe backfoot
flat on the floor and
transfer weight tothe
front foot.
•Holdfor about 10
seconds.
•Repeat for other leg.
Note: Keep yourbackand
rearlegstraightwhen
performingthisexercise.
Hamstring Stretch:
•Keepfrontlegstraight,
handsonbentleg(thigh).
Pushdownandoutuntilyou
begintofeelthe stretchin
backofknee (orstraightleg).
•Keepknees unlocked and
backstraight.
•Holdfor about 10 seconds.
•Repeat for other leg.
Thigh Stretch:
•Standon rightlegandtake
holdofthe left anklewiththe
left hand,drawing the foot up
closebehindtothe hips.
•Keepbackstraightand
knees together.Useawall
for balance ifrequired.
•Holdfor about 10 seconds.
•Repeat for the other leg.

17
[入文档的引述或关注点的摘要。您可将
文本框放置在文档中的任何位置
。
请使用
Maintenance
Warning:
Beforecleaning the machine please makesurethe power has been switchedoff.
1.Cleaning:Wipeawaythe duston the belt, running boardandsidefootboardasexcessdustmayincreasethe
frictionalonthe belt and cause damagetothe machine. It isrecommendedtocleanthe machineoncea
month.
2.Lubrication: Pleaseuse lubrication oil between the running belt andboardtwiceayear.
3.Running belt isoff-center: The Running belt maybecomeoff-center after usingfor aperiod oftime. First
allow the machinetorun by it-self andthe belt maycentralizeautomatically. Ifit does not centralize
automatically, you can adjust the position ofthe belt byscrewing the bolt showninthe imagesbelow. Ifthe
running belt has shiftedtothe right, you need totighten the screw on the right ofthe belt or loosenthe screw
on the left. Ifthe belt has moved tothe left, do the opposite.
4.Belt Slipping: Please adjust boltsaccording tothe diagrambelow.Whenadjusting the twosides make sure
each adjustment isthe same, on either side ofthe treadmill.Werecommend adjusting byhalf aturnuntil the
running belt doesnot slipor deviate.Avoidmaking the belt too tight as thismay damageit.

18
[入文档的引述或关注点的摘要。您可将
文本框放置在文档中的任何位置
。
请使用
ExplosiveView

19
[入文档的引述或关注点的摘要。您可将
文本框放置在文档中的任何位置
。
请使用
Part List
NO.
Description Specification QTY NO.
Description SpecificationQTY
1 Bottommainframe 1 35 Non metallichexnut I M6 8
2 Mainframe 1 36 Non metallichexnut I M8 6
3 Displaysupport frame 1 37 Cross pan headtappingscrew ST4.2×20 4
4 Leftcolumn 1 38 ClassC hexbolt M8×35 1
5 Rightcolumn 1 39 Pan head innerhexbolt M8×15 12
6 Motor seat frame 1 40 Pan head innerhexbolt M8×20 4
7 Solid pin 2 41 Pan head innerhexbolt M8×30 1
8 Shaftsleeve 2 42 crossrecessedpan head drilling
screwwithtapping screwthread ST4.2×12 8
9 Front roller 1 43 Pan head innerhexbolt M8×40 2
10 Rear roller 1 44 Pan head innerhexbolt M8×45 3
11 Solid cross wrench S=13 14 15
1 45 Pan head innerhexbolt M10×30 2
12 5# inner hexwrench 5mm 1 46 Pan head innerhexbolt M6×55 2
13 Air pumper 1 47 Pan head innerhexbolt M6×45 1
14 Top cover ofdisplay 1 48 Inner hexcountsunkbolt M6×35 8
15 Top cover ofmotor 1 49 Cross recessed pan head screw ST4.2×50 2
16 Bottomcoverof motor 1 50 Cross recessed pan head screw M5×8 14
17 Left adjuster 1 51 Cross recessed pan head screw S T2.9×8 2
18 Right adjuster 1 52 Cross recessed pan head screw ST4.2×12 9
19 Side rail 2 53 Cross recessed pan head screw ST4.2×30 2
20 Runningbelt 1 54 serrated washer 6 3
21 Multi-V belt 1 55 serrated washer 8 14
22 Display 1 56 Spring washer 8 6
23 Blue cushion 4 57 ClassC flat washer 8 7
24 Blackcushion 4 58 ClassC bigwasher φ10×φ26×2.0
2
25 Oring plug 2 59 PCB board 1
26 Wheel 2 60 Handle pulse 2
27 Wirenail 1 61 Displayuppercable 1
28 Rubberpad 4 62 Displaytrunkcable 1
29 Adjustable rubberpad 2 63 Displaylower cable 1
30 Pipe plug 2 64 Sensor 1
31 Foam 2 65 DC motor 1
32 EVApad 2 66 Safetykey 1
33 Leftcolumncover 1 67 AC cable Blue 1
34 Rightcolumncover 1 68 AC cable Brown 2