FitLogic Miracle V380 User manual

- 0 -
Read all instructions carefully before
assembly and using this product. Retain
this owner’s manual for future reference:
!

- 1 -
1. Plug the power cord of the treadmill directly into a dedicated grounded circuit.
This product must be grounded well. If it has breakdown, grounding provides a
path of least resistance for electric current to reduce the risk of electric shock.
2. Position the treadmill on a clean and flat surface with at least 2m*1m area. Do
not place the treadmill on thick carpet as it may interfere with proper ventilation.
Also, do not place the treadmill near water or outdoors.
3. Position the treadmill where the wall plug is visible and accessible.
4. NEVER start the treadmill while you are standing on the walking belt. After
turning the power on and adjusting the speed control, there may be a pause before
the walking belt begins to move, ALWAYS stand on the foot rails on the sides of the
frame until the belt is moving.
5. Wear appropriate clothing when exercising on the treadmill. Do not wear long,
loose fitting clothing that could become caught in the treadmill. Always wear
running or aerobic shoes with rubber soles.
6. Always unplug the power cord before removing the treadmill motor cover.
7. Keep small children away from the treadmill during operation.
8. Always hold the handrails when initially walking or running on the treadmill, until
you are comfortable with the use of the treadmill.
9. Always attach the safety pull pin rope to your clothing when using the treadmill.
If the treadmill should suddenly increase in speed due to an electronics failure or
the speed being inadvertently increased, the treadmill will come to a sudden stop
when the pull pin is disengaged from the console.
IMPORTANT SAFETY PRECAUTIONS

- 2 -
10. When the treadmill is not being used, the power cord should be unplugged
and the safety pull pin should be removed.
11. Before starting any exercise program, consult with your physician or health
professional. He or she can help to establish the exercise frequency, intensity
(target heart zone) and time appropriate to your particular age and physical
condition. If you have any pain or tightness in your chest, an irregular heartbeat,
shortness of breath, feel faint or have any discomfort while you exercise, STOP
IMMEDIATELY! Consult your physician before continuing.
12. If you observe any damage or wear on the mains plug or on any section of the
mains lead then please have these replaced immediately by a qualified electrician
–do not attempt to change or repair these yourself.
13. If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
14. Put your feet on the side rail before using the treadmill, and always attach the
safety pull pin rope to your clothing. Hold the handle bar before the running belt
moving well ( feel the running speed by your single foot before using it). To avoid
loss balance, please slow down the speed to the lowest or take off the safety. And
hold the handle bar to jump to the side rail when emergency or the safety key is
not attached.
IMPORTANT SAFETY PRECAUTIONS

- 3 -
When you open the carton, you will find the below spare
parts
Spare parts list:
NO.
DESCRIPTION
SPE.
QTY.
NO.
DESCRIPTION
SPE
QTY
1
Main Frame
1
2
Computer set
1
3
Left Support Upright
1
4
Right Support Upright
1
18
Left Handle Bar Cover
1
19
Right Handle Bar Cover
1
50
Left Bottom Decoration
Cover
1
51
Right Bottom Decoration Cover
1
68
Allen Wrench With Screw
Driver
S=13、14、15
1
71
6# Allen Wrench
6mm
1
81
Screw
ST4.2*13
8
91
Screw
ST4.2*12
6
93
Bolt
M10*25
8
94
Washer
10
8
97
Washer
8
4
98
Bolt
M8*52
4
121
5# Allen Wrench
5mm
1
Assembly tools:
Allen Wrench With Screw Driver: 5mm 1pc 6mm 1pc
Screw driver :S=13、14、15 1pc
ASSEMBLY INSTRUCTIONS

- 4 -
Notice: Do not turn power on before assembly is done.
Step 1:
Step 2:
Step 3:
ASSEMBLY STEPS
1. Open the carton，take out
the above spare parts，put the
MAIN FRAME on the ground.
2. Insert the Left Support
Upright (3) into the Main Frame.
Lock Left Support Upright (3)
onto the Main Frame (1) with
the M10*25 bolt (93).
3. Connecting the middle wire
joint (123) of the Right Support
Upright (4) onto the joint (124)
of the Main Frame. And then
insert the Right Support Upright
onto the Main Frame (1). Then
fix the Right Support Upright
onto the Main Frame with the
M10*25 bolt (93) and lock
washer (94) by the 6# Allen
wrench.

- 5 -
Step 4:
Step 5:
Step 6:
4. Connect the computer wire
(122) and the middle wire in
the Right Support Upright
(123a). And lock the computer
set onto the Left & Right
Support Upright with the
M8*52 bolt (98) & washer (97)
by the 5# Allen wrench (121)
Attention: Before assembling the back cover, make sure all the
above procedures are completed strictly and all the bolts are locked
tightly.
Use the Allen wrench with
driver to lock the left bottom
decoration cover (50) onto the
Main Frame (1) with the screw
ST4.2*12 (91).
Use the Allen wrench with
driver to lock the right bottom
decoration cover (51) onto the
Main Frame (1) with the screw
ST4.2*12 (91).

- 6 -
Step 7:
Use the Allen wrench with
driver to lock the left & right
handle bar cover (18,19) onto
the computer set (2) with
SCREW ST4.2*13(81).
Attention：Please don’t put the power on untill you make sure that
all the above steps are finished and all the bolts are tightened
well. Please also read all the following instructions when you
operate the treadmill.

- 7 -
Pulling up:
Pulling down:
FOLDING INSTRUCTION
1. Hold the place A, and pull up
the main frame as the arrow
showing till you hear the sound
from pedal hook.
2. Hold place A, and kick the
pedal hook (place B), then the
main frame will decline
automatically.

- 8 -
TECHNICAL PARAMETER
BUILT UP
SIZE(mm)
1890*905*1320
FOLDABLE
SIZE(mm)
980*815* 1620
RUNNING
BOARD(mm)
1390*510
NET WEIGHT
105 KGS
INCLINE
LEVELS
15 sections
SPEED RANGE
1.0-20KM/H
MAX USE’S
WEIGHT
125 KGS
SIX LCD
DISPLAY
WINDOWS
SPEED TIME DISTANCE CALORIES PULSE INCLINE

- 9 -
GROUND GUIDE
This product must be grounded. If it should malfunction or breakdown,
grounding provides a path of least resistance for electric current to reduce the
risk of electric shock. This product is equipped with a cord having an
equipment-grounding conductor and a grounding plug. The plug must be
plugged into an appropriate outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
DANGER –Improper connection of the equipment-grounding conductor can
result in a risk of electric shock. Check with a qualified electrician or
serviceman if you are in doubt as to whether the product is properly grounded.
Do not modify the plug provided with the product –if it will not fit the outlet,
have a proper outlet installed by a qualified electrician. This product is for use
on a nominal 120-volt circuit and has a grounding plug that looks like the plug
illustrated in sketch A in following figure. Make that the product is connected
to an outlet having the same configuration as the plug. No adapter should be
used with this product.

- 10 -
WINDOW DISPLAY:
1. “SPEED” window: On operation status, it will display the current
speed, and the speed range is: 1.0-20 KM/h.
2. “PUL, INCL” window：Display the current incline level and the range is
0-15%. When runner grasps the hand pulse, it will test pulse after 5
seconds and show the data in window, the relevant direct light will show at
the same time, pulse range is 50 to 200 hypo/min ( the data is just for
reference, can not be as medicinal data).
3. “TIME”Window: Display the running exercise time. Counting from 0:00
to 99:59, when it reaches 99:59, the speed of the treadmill will be slowly
decreased to “End”. After the treadmill stops completely, the unit will
become STANDBY status after 5 seconds. Counting from the target data
down to 0:00, when it reaches 0:00, the speed of the treadmill will also be
slowly decreased to “End”. After the treadmill stops completely, the unit
OPERATION GUIDE

- 11 -
will become STANDBY state.
4. “DIS. / CAL.” Window: Display runner calories and distance. When show
calories, counting from 0 to 999, when it is over 999,the display will be
reset to 0; When calories counting down, it will count down from setting
data to 0, then the treadmill will stop smoothly and show ‘End’, enter the
STANDBY state after 5 seconds. Display the exercise distance. Counting
from 0:00 to 99:9, when it is over 99:9, the display will be reset to be 0:00
and the counting will start again from 0:00 to 99:9. Counting from the
target distance down to 0:00, when it reaches 0:00, the speed of the
treadmill will also be slowly decreased to “End”. After the treadmill stops
completely in 5 seconds, the unit will become STANDBY state.
BUTTON FUNCTION:
1. “POWER” Button: Press this button, and you can turn on the treadmill
after connecting the plug, then TIME window will show the user’s weight
(KG). User can rearrange the speed and incline level according to their
own weight. When all is done well, press “Enter” button to save it and
come to the next step or begin running.
2. “SELECT” Button：When the treadmill is on, press SELECT button to
choose and set up the exercise time and program from “0:00”,
“15:00”,“1.0”,“50”,“P1->P2->P3->P4>P5->P6->P7->P8->P9->P10-P11-
P12-P13-P14-P15-U1-U2-U3” “HRC1, HRC2, HRC3”. Manual mode is the
preset program, (0:00 is manual mode, 15.00 is TIME count-down mode;
1.0 is DISTANCE count-down mode; 50 is CALORIES count-down mode;
Pre-set programs are P1-P15 and users’ self setting programs are U1-U3;
HRC is pulse mode).
3. “ENTER” Button: Press this button go into next step or save the
parameter.
4. “START/ STOP”button：When starting or stopping the treadmill, you can
press this two buttons. Turn on the power and attach the magnet end of the
safety pulling rope to the computer, then press the START button at any
time and motor can start right away. Press STOP button while running; it
can stop motor and set program default; Under the manual mode, it works
from the lowest speed of 1.0Km/h and incline level of 0.

- 12 -
5. “SPEED+”、“SPEED-” Speed Button：After starting the treadmill,
pressing “SPEED” button can adjust the speed and the adjustment range is
0.1km per time. When pressing “SPEED” button for more than 0.5 seconds,
the speed will be continuously increased or decreased.
6. “INC+”、“INC-” Button：After starting the treadmill, pressing “INCLINE”
button can adjust the level of incline and the adjustment range is 1 section
per time. When pressing “INCLINE” button for more than 0.5 seconds, the
incline level will be continuously increased or decreased.
7. Button for COOLING FAN: Start and stop the cooling fan
(Optional).
8．“INCLINE：3%-15%” quick access button：you can do quick setting of
the incline.
9．“SPEED：4KM/H-16KM/H ” quick access button：you can do quick setting
of the speed.
START-UP QUICKLY (MANUAL)
1. Put the power switch on, and then attach the safety key to the
computer.
2. Press START/STOP button ，the system will enter into 3 seconds
count-down, the buzzer will make the sound “Bi” and the TIME window will
start to count down, then the speed will run 1.0km/hour after 3 seconds.
3. After start-up, you can use speed up or down to adjust the speed up or
down.
The operation of exercise process:
1. Press speed-down will reduce the running speed.
2. Press speed-up will increase the running speed.

- 13 -
3. Press incline-down will reduce the incline level.
4. Press incline-up will increase the running level.
5. Press PAUSE will reduce until it stopped.
6. When the user hold the hand pulse about 5 seconds, it will display pulse
data.
Manual mode:
1. When the treadmill is under the standby state, press START button, the
treadmill will start to run from the speed 1.0km/h and the inline of “0”
level. The other windows will also start to count up from “0”, press
“INCLINE+”,”INCLINE-”, “SPEED+”, “SPEED-” to change the incline and
speed.
2. Set up the TIME, press “MODE” button to enter into time count-down,
the TIME window will display “15:00” and glitter. Press
“INCLINE+”,”INCLINE-”, “SPEED+”, “SPEED-” to set up the time that you
need. The setting range is 5:00-99:00.
3. In TIME setting mode, press “ MODE “ button to enter into distance
count-down, the DISTANCE window will display “1.0” and glitter. Press
“INCLINE+”,”INCLINE-”, “SPEED+”, “SPEED-” to set up the distance that
you need. The setting range is 0.5—99.9.
4. To set up the CALORIES, press “MODE” button to enter into calories
count down, the CAL window will display “50’ and glitter. Press
“INCLINE+”,”INCLINE-”, “SPEED+”, “SPEED-” to set up the calories that
you need. The setting range is 10-999.
5. When setting is finished, press “START” button to start up, the
treadmill will run after 3 seconds, press “INCLINE+”,”INCLINE-”, “SPEED+”,
“SPEED-”to adjust the speed and the incline; press the PAUSE, the
treadmill will stop.
PRESET PROGRAMS:
This treadmill has 15 preset programs. Under the standby status, press
“PROGRAM” button, the window of “SPEED” will P1-P15. After choosing

- 14 -
the program that you need, the TIME window will flash and display the
preset time10:00, press “INCLINE+”,”INCLINE-”, “SPEED+”, “SPEED-” to
set up the exercise time that you need. Press “START” button to start the
preset program. The preset program is divided into 10 sections. Each
exercise time=the setting time/10. When the system enters into the next
section, it will make 3 sound “Bi—Bi—Bi“, then the speed and the incline
will be changed according to the setting speed and incline of the program,
then press “INCLINE+”,”INCLINE-”, “SPEED+”, “SPEED-” to change the
INCLINE and SPEED as you need. When the program enters into the next
section again, the system will make 3 sound “Bi—Bi—Bi“, then the speed
and the incline will become the speed and the incline of the preset program
automatically. After the program is completed, the system will make 3
sound “Bi—Bi—Bi”, and the treadmill will decrease the speed slowly to END.
After 5 seconds, the treadmill will become standby state.
USER PROGRAM:
U1、U2、U3: Besides the 15 preset programs, you can also set up another
3 user’s programs for user’s programs as your need: U1、U2、U3.
1. User’s programs setting:
Press the button “PROGRAM”until it shows the user’s program（U1-U3）,
then press the “MODE” to enter into the setting. For the first section,
press “SPEED+”、“SPEED -”to change the speed, and press “INCLINE+”、
“INCLINE -”to change the incline. Press “MODE” to complete the setting of
the first section and also go to the setting of the next section till all the 10
sections are completed. The setted data will be saved without losing due to
the power off until next time when you reset it.
2. Start-up of the user’s program:
Under the standby state, press “PROGRAM”until it shows the user’s
program（U1-U3）, set the running
time that you need and press the “START” button for starting the treadmill.
3. User’s program set-up explanation:

- 15 -
Each user’s program divides time to be ten sections, the treadmill can only
be started after the speed and the incline are set well for the 10 sections
and the running time can also be set well.
Program exercise chart:
Each program will divide into 10 grade for the exercise time and each time
sect has the speed and incline accordingly.
TIME PROGRAM
Form :TIME INTERVAL(kilometer)
1
2
3
4
5
6
7
8
9
10
P1
SPEED
2
4
3
4
3
5
4
2
5
3
INCLINE
1
2
3
3
1
2
2
3
2
2
P2
SPEED
2
5
4
6
4
6
4
2
4
2
INCLINE
1
2
3
3
2
2
3
4
2
2
P3
SPEED
2
5
4
5
4
5
4
2
3
2
INCLINE
1
2
2
3
1
2
2
2
2
1
P4
SPEED
3
6
7
5
8
5
9
6
4
3
INCLINE
2
2
3
3
2
2
4
6
2
2
P5
SPEED
3
6
7
5
8
6
7
6
4
3
INCLINE
1
2
4
3
2
2
4
5
2
1
P6
SPEED
2
8
6
4
5
9
7
5
4
3
INCLINE
2
2
6
2
3
4
2
2
2
1
P7
SPEED
2
6
7
4
4
7
4
2
4
2
INCLINE
4
5
6
6
9
9
10
12
6
3
P8
SPEED
2
4
6
8
7
8
6
2
3
2
INCLINE
3
5
4
4
3
4
4
3
3
2
P9
SPEED
2
4
5
5
6
5
6
3
3
2
INCLINE
3
5
3
4
2
3
4
2
3
2
P10
SPEED
2
3
5
3
3
5
3
6
3
3
INCLINE
4
4
3
6
7
8
8
6
3
3
P11
SPEED
3
5
8
8
9
5
7
6
3
2
INCLINE
4
5
6
6
9
9
10
12
6
3
P12
SPEED
2
5
5
4
4
6
4
2
3
4
INCLINE
3
5
6
7
12
9
11
11
6
3
P13
SPEED
2
7
4
7
8
9
4
5
3
2
INCLINE
5
6
6
4
6
5
8
9
4
2
P14
SPEED
2
6
5
4
8
6
5
2
3
3
INCLINE
5
6
5
8
4
5
5
10
6
3
P15
SPEED
2
6
5
4
8
7
5
3
3
2
INCLINE
3
4
5
6
3
5
5
6
4
3

- 16 -
PULSE PROGRAM CHART:
Target heart rate zone chart
HR1 program
HR2 program
HR3 program
Age
Target zone (L-H)
Age
Max
BPM
Target zone (L-H)
Age
Target zone (L-H)
Lowest
Default
Highest
Lowest
Default
Highest
Lowest
Default
Highest
15
128
133
138
15
149
154
159
15
169
174
179
16
128
133
138
16
148
153
158
16
168
173
178
17
127
132
137
17
147
152
157
17
168
173
178
18
126
131
136
18
147
152
157
18
167
172
177
19
126
131
136
19
146
151
156
19
166
171
176
20
125
130
135
20
145
150
155
20
165
170
175
21
124
129
134
21
144
149
154
21
164
169
174
22
124
129
134
22
144
149
154
22
163
168
173
23
123
128
133
23
143
148
153
23
162
167
172
24
122
127
132
24
142
147
152
24
162
167
172
25
122
127
132
25
141
146
151
25
161
166
171
26
121
126
131
26
141
146
151
26
160
165
170
27
120
125
130
27
140
145
150
27
159
164
169
28
120
125
130
28
139
144
149
28
158
163
168
29
119
124
129
29
138
143
148
29
157
162
167
30
119
124
129
30
138
143
148
30
157
162
167
31
118
123
128
31
137
142
147
31
156
161
166
32
117
122
127
32
136
141
146
32
155
160
165
33
117
122
127
33
135
140
145
33
154
159
164
34
116
121
126
34
135
140
145
34
153
158
163
35
115
120
125
35
134
139
144
35
152
157
162
36
115
120
125
36
133
138
143
36
151
156
161
37
114
119
124
37
132
137
142
37
151
156
161
38
113
118
123
38
132
137
142
38
150
155
160
39
113
118
123
39
131
136
141
39
149
154
159
40
112
117
122
40
130
135
140
40
148
153
158
41
111
116
121
41
129
134
139
41
147
152
157
42
111
116
121
42
129
134
139
42
146
151
156
43
110
115
120
43
128
133
138
43
145
150
155
44
109
114
119
44
127
132
137
44
145
150
155
45
109
114
119
45
126
131
136
45
144
149
154
46
108
113
118
46
126
131
136
46
143
148
153
47
107
112
117
47
125
130
135
47
142
147
152
48
107
112
117
48
124
129
134
48
141
146
151
49
106
111
116
49
123
128
133
49
140
145
150
50
106
111
116
50
123
128
133
50
140
145
150
51
105
110
115
51
122
127
132
51
139
144
149

- 17 -
52
104
109
114
52
121
126
131
52
138
143
148
53
104
109
114
53
120
125
130
53
137
142
147
54
103
108
113
54
120
125
130
54
136
141
146
55
102
107
112
55
119
124
129
55
135
140
145
56
102
107
112
56
118
123
128
56
134
139
144
57
101
106
111
57
117
122
127
57
134
139
144
58
100
105
110
58
117
122
127
58
133
138
143
59
100
105
110
59
116
121
126
59
132
137
142
60
99
104
109
60
115
120
125
60
131
136
141
61
98
103
108
61
114
119
124
61
130
135
140
62
98
103
108
62
114
119
124
62
129
134
139
63
97
102
107
63
113
118
123
63
128
133
138
64
96
101
106
64
112
117
122
64
128
133
138
65
96
101
106
65
111
116
121
65
127
132
137
66
95
100
105
66
111
116
121
66
126
131
136
67
94
99
104
67
110
115
120
67
125
130
135
68
94
99
104
68
109
114
119
68
124
129
134
69
93
98
103
69
108
113
118
69
123
128
133
70
93
98
103
70
108
113
118
70
123
128
133
71
92
97
102
71
107
112
117
71
122
127
132
72
91
96
101
72
106
111
116
72
121
126
131
73
91
96
101
73
105
110
115
73
120
125
130
74
90
95
100
74
105
110
115
74
119
124
129
75
89
94
99
75
104
109
114
75
118
123
128
76
89
94
99
76
103
108
113
76
117
122
127
77
88
93
98
77
102
107
112
77
117
122
127
78
87
92
97
78
102
107
112
78
116
121
126
79
87
92
97
79
101
106
111
79
115
120
125
80
86
91
96
80
100
105
110
80
114
119
124
1. When the treadmill is on, press SELECT button till the speed window
displays “H1\H2\H3”. Then press START button, the system will automatically
offer some reference data for the user as below:
“H1”program: the highest speed is 8.0km/h; age :30; default
pulse:124/minute；
“H2”program: the highest speed is 9.0km/h; age :30; default
pulse:143/minute；
“H3” program: the highest speed is 10km/h; age :30; default
pulse:162/minute.

- 18 -
2. If press “ENTER” button to set the age, TIME window will show the default
age 30. User can choose the suitable age range; the adjustable range is 15-80
(H1/H2/H3 Chart will give the detail for reference ).
3. Press ENTER button again to save the age, the computer will offer a suitable
pulse on the window for reference. User can choose the pulse through the
“INCLINE+”, “INCLINE -”, “SPEED+”, “SPEED –” button as well; the adjustable
range is 48-151 (H1/H2/H3 Chart will give the details for reference).
4. After choosing the age and pulse, press the ENTER button again to enter
the time setting system. The default time is 10:00. User can press “INCLINE+”,
“INCLINE -”, “SPEED+”, “SPEED –” button to change the time; the adjustable
range is 10:00-99:00.
Press “ENTER” button to enter the start system or press “START” button
directly to start it.
5. Under the H1/H2/H3 program, user can press “INCLINE+”, “INCLINE -”,
“SPEED+”, “SPEED –” button to change the speed and incline level, but it will
automatically change the speed and incline level to your goal.
6. The first one minute before exercise is the warm-up phase. The system
won’t change the speed and incline level, so change it by yourself. One minute
later, the system will increase the speed range automatically 0.5km or 0.5
mile every time according your pulse. If when it comes to the highest speed of
this program, it still cannot reach your goal, the system will increase the
incline level( one level each time) for the goal. When it comes to the users’
goal, the speed and incline level won’t change.
Attention: When using chest belt, make sure that the chest belt is tied
up to your shin near your chest.

- 19 -
Range of program
PROGRAM
BEGIN
SET UP
RANGE
DISPLAY
RANGE
TIME(MIN:SECOND)
0:00
15:00
5:00-99:00
0:00－99:59
INCLINE(%)
0
0
0-15
0-15
SPEED(K/h)
1.0
1.0
1.0-16
1.0-16
DISTANCE(KM)
0
1.0
0.5-99.9
0.00－99.9
PULSE(hypo/min)
P
N/A
N/A
50-200
CALORIE(THERM)
0
50
10-999
0－999
Safety lock function:
Pull out the safety pulling rope, then the treadmill will stop immediately.
All the windows display“―――” ，the buzzer will make 3 sound
“B—B—”,now the treadmill must be stopped. Attach the magnet end of the
safety pulling rope to the computer, the treadmill will be at the beginning
of running.
Turn off:
Turn off the power: You can turn off the power to stop the treadmill, it
won’t be damaged at any time.
Caution:
1. We recommend that you maintain a slow speed at the beginning of a
session and hold on to the handrails until you become comfortable and
familiar with the treadmill.
2. Attach the magnet end of the safety pulling rope to the computer and
also attach the clip of the safety pulling rope to your clothing.
3. To end your workout safely, press the PAUSE button or pull out the
safety pulling rope, then the treadmill will stop immediately.