Vivo DESK-V000S User manual

Desk Riser
Instruction Manual
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
Scan the QR code with your mobile device or follow the link
for helpful videos and specications related to this product.
https://vivo-us.com/products/desk-v000s
SKU: DESK-V000S/W

2
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualied technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Do not use this product for any purpose that is not explicitly specied in this manual
and do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect
assembly, or inappropriate use.
PACKAGE CONTENTS
26lbs
(13kg)
ASSEMBLY STEPS
STEP 1
Carefully turn Desk (A) upside down
on a at surface. Use scissors to cut
the shipping ties.
Press side lever to slowly li and raise Desk (A) to fully adjusted position.
WARNING!
A (x1)
Desk
B (x2)
Tray Brackets
S-A (x6)
M5x12mm
Flat Head Screw
S-B (x6)
M5x12mm
Round Head Screw
D (x2)
Cable Ties
E (x2)
Pad
TOOLS NEEDED
Scissors
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
Phillips
Screwdriver
DESKTOP
5lbs
(2kg)
KEYBOARD TRAY
C (x1)
Keyboard Tray
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
DO NOT place hands on or near support bars.
Moving parts can crush and cut. Pinch points
are created during liing and lowering the work
surface. Failure to follow these instructions may
result in serious personal injury.
WARNING: PINCH POINT
A
A

3
STEP 2 STEP 3
STEP 4
Secure Tray Brackets (B) to pre-drilled holes in
Keyboard Tray (C) using M5x12mm Flat Head
Screw (S-A) and a Phillips screwdriver. Apply
Pads (E) to front side of Tray (C).
Flip Desk (A) upside down and attach tray
assembly to underside of desktop using
M5x12mm Round Head Screw (S-B) and a
Phillips screwdriver.
Raise desktop slowly
to keep items stable.
Keep monitor and laptop
base fully on the desktop.
Leave enough slack in cable
to allow for full range of
vertical motion (15” / 38 cm).
Follow the cable routing
instructions to avoid the potential
to pinch cables.
CAUTION!
Failure to follow these instructions may result in property damage and/or personal injury.
S-A
S-B
B
E
A
Return desk assembly upright and place accessories as desired. Use Cable Ties (D) to organized
cords.
D
C

LAST UPDATED: 11/22/2022
REV2V
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303