Flanders PrecsionCell M16 PB1007-0307 User manual

PrecsionCell M16
General
Flanders introduces the newest member of the
PrecisionCell design family. This lter that has been
tested and certied to be MERV 16 or higher for
applications requiring higher efficiency than our
standard ASHRAE lters and lower pressure drops
than traditional DOP lters.
Installation Considerations
The PrecisionCell M16 lters are manufactured with
wet laid micro berglass media. The media is 100%
separatorless and self-supporting. This means there
are no glue beads, media strips, or string separating
the media pack. The deletion of aluminum separators
makes the lter incinerable and easy to dispose of.
The frame is constructed of either 24 GA galvanized
steel, 0.063” aluminum or thin gauge stainless steel.
The lter media is sealed to the frame on all (4) sides
with a two component ame retardant solid urethane.
PrecisionCell M16 is available in a box style, header
style, or double turn ange frame conguration.
Various gasket material options are available and are
applied to conform to customer requirements.
Precision Cell M16 lters are UL900 Class 1 rated.
Separatorless Self-Supporting
Micro Fiberglass Filter
PB1007-0307
Product Superiority
The product offers the following advantages over
conventional ASHRAE lters.
Maximum Media Area
Gasket seal filters have 265 sq. ft. of media
compared to 125 sq ft for traditional ASHRAE
lters. The greater media area provides a longer
time period between lter replacements.
Exceptional Efciency
The signicant quantity of media translates into an
extremely low media velocity. Therefore a minimum
overall efciency of 92% at 0.3µm and a MERV 16
per ASHRAE standard 52.2.
Minimal Pressure Drop
The typical DOP rated lter pressure drop can
range from 1.4”w.g. to 1.8”w.g. at the rated ow.
The pressure drop of the PrecisionCell M16 is
0.8”w.g. at the rated ow.
Physical Data
Frame: 24 ga. corrosion-resistant steel. Other
frame materials are also available.
Media:Moisture-resistant micro-ne berglass
paper, sealed in the frame with Class 1
urethane.
Separators: Hemmed corrugated aluminum.
Flanders also offers an exclusive Pureform®
separatorless model. Contact factory.
Headers: 13/16 “ wide corrosion-resistant steel
Operating Limits: 100% RH and 2500F
Actual Face: Nominal size less 5/8”
Actual Depth: 5-7/8” or 11-1/2 ”
Important Features
• Maximum Media Area
• Exceptional Efciency
• Minimal Pressure Drop
Flanders Filters ~ Foremost in Air Filtration
Toll Free : 1-800-637-2803
®
FOREMOST IN AIR FILTRATION

Flanders Filters, Inc.
531 Flanders Filter Road
Washington, NC 27889
Phone: [phone]
Fax: [phone]
Toll Free: [phone]
Website: www.anderscorp.com
Represented By:
PrecisionCell M16 Selection
All products have a rated overall DOP efciency of 92% at 0.3µm and are rated MERV 16 per ASHRAE
standard 52.2.
Filter model number breakdown.
®
0 - 00T - W - 16 - 00 - IU - B2 - 00 - YY- F
Filter Frame Material:
Use “16” for galvanized, “05” for
aluminum,
and “03” for stainless steel.
Filter Frame Style:
Use “00” for box style, “01” for single
header, “02” for double header,
and “03” for double turn ange style.
Faceguard style and location
Use “00” for none,
“G1” for expanded galvanized upstream,
“G2” for expanded galvanized downstream
“G3” for expanded galvanized both sides.
Gasket Style and Location:
Use “00” for none,
“B1” for black poly-b upstream,
“B2” for black poly-b downstream, and
“B3” for black poly-b on both sides.
Product Options
The PrecisionCell M16 lters are available as gasket
seal only, contact factory for additional options.
Gasket Seal
The standard lter gasket is 1/4” black poly-
butyl attached to the frame with a pressure
sensitive adhesive. Other gasket options are
available upon request.
Faceguards
The standard lter faceguard is an expanded
galvanized screen on the downstream side.
Other materials and locations are available
upon request.
Filter Size: Filter Size Designator Filter Height Filter Width Filter Depth Rated Airow
YY-F 23-3/8” 23-3/8” 11-1/2” 2000 CFM
YU-F 23-3/8” 11-3/8” 11-1/2” 1000 CFM
YX-F 23-3/8” 19-3/8” 11-1/2” 1700 CFM
XX-F 19-3/8” 19-3/8” 11-1/2” 1400 CFM
ZX-F 24-3/8” 19-3/8” 11-1/2” 1750 CFM