Flash Furniture ET-CT002-1-BK-GG User manual

Before You Begin:
Please identify all component parts and hardware pieces required before you begin. Carefully remove all of the
components from the packaging and set aside for assembly. Assemble on a soft surface to prevent scratching
during assembly.
Caution:
Tighten all components securely before use. Failure to do so may result in personal injury.
DO NOT use any sharp objects to open plastic wrapped components as damage to product or componenets
may result.
Warning:
CHOKING HAZARD - Small Parts. Adult Assembly Required.
Injury may result from tipping furniture. You must install the Tipping Restraint Hardware with the unit to prevent
the unit from tipping and causing any accidental injury, instability, death or damage. The tipping restraint is
intended only as a safety measure, it is not a substitute for proper adult supervision.
This tipping restraint is not an earthquake restraint. If you wish to add the extra security of earthquake
restraints, they must be purchased and installed separately.
Serious or fatal crushing injuries can occur from furniture tipping over. To prevent furniture from tipping over it
ferent wall materials
Failure to detach this restraint before moving furniture may result in injury or damage.
DO NOT ALLOW CHILDREN TO CLIMB ON FURNITURE
ASSEMBLY INSTRUCTIONS
31.5"Square Metal
Indoor-Outdoor Table
Customer Service Email: [email protected] | Phone: [phone]
ET-CT002-1-BK-GG / ET-CT002-1-BL-GG / ET-CT002-1-CB-GG / ET-CT002-1-GN-GG / ET-CT002-1-MINT-GG
ET-CT002-1-OR-GG / ET-CT002-1-POC-GG / ET-CT002-1-PUR-GG / ET-CT002-1-RED-GG / ET-CT002-1-SIL-GG
ET-CT002-1-WH-GG / ET-CT002-1-YL-GG / ET-CT002-4-30-BK-GG / ET-CT002-4-30-BL-GG / ET-CT002-4-30-CB-GG
ET-CT002-4-30-GN-GG / ET-CT002-4-30-MINT-GG / ET-CT002-4-30-OR-GG / ET-CT002-4-30-POC-GG
ET-CT002-4-30-PUR-GG ETCT002-4-30-RED-GG / ET-CT002-4-30-SIL-GG / ET-CT002-4-30-WH-GG
ET-CT002-4-30-YL-GG / ET-CT002-4-70-BK-GG / ET-CT002-4-70-BL-GG / ET-CT002-4-70-GN-GG / ET-CT002-4-70-OR-GG
ET-CT002-4-30-RED-GG / ET-CT002-4-30-SIL-GG / ET-CT002-4-30-WH-GG / ET-CT002-4-30-YL-GG
Thank you for your purchase!

STEP 1
Thank you for your purchase!
1
3
2
A
B
1
2
3
PARTS
1PC
1PC
4PCS
12PCS
12PCS
Table
Top
Legs
Screws
Washers
Allen Wrench
Lay Table Top (Part A) face down on a smooth, clean surface. Attach (4) Legs (Part B)
using (12) Washers (Part 2) and (12) Screws (Part 1). Tighten using Allen Wrench (Part 3).