Flash Furniture GC-MBLK61-BK-GG User manual

ASSEMBLY INSTRUCTIONS
Before You Begin:
Customer Service Email: [email protected] | Phone:[phone]
GC-MBLK61-BK-GG / GC-MBLK61-WH-GG
Home Office Desk
with
Open Storage
Thank you for your purchase!
Tighten all components securely before use. Failure to do so may result in personal injury.
DO NOT use any sharp objects to open plastic wrapped components as damage to product or componenets may result.
CHOKING HAZARD - Small Parts. Adult Assembly Required.
DO NOT ALLOW CHILDREN TO CLIMB ON FURNITURE
Serious or fatal injuries can occur from furniture tipping over. You must install Tipping Restraint Hardware (where
included) to help prevent the unit from tipping and causing accidental injury, instability, death or damage. The tipping
restraint is intended only as a safety measure, it is not a substitute for proper adult supervision.
To help prevent furniture from tipping over it must be permanently attached to the wall. Anti-Tip Safety Wall Straps
suitable for the unit weight and wall materials (if not included) should be purchased and installed.
Please identify all component parts and hardware pieces required before you begin. Carefully remove all of the
components from the packaging and set aside for assembly. Assemble on a soft surface to prevent scratching during
assembly.
Assembly Time
Load Bearing
30 min
LBS LBS LBS
LBS LBS
LBS
200 LBS

Have a Question/Concern?
Quality products and first-class customer service are the cornerstone
of long-lasting consumer relationships. We strive toward excellence
in all we do and want you to be completely satisfied with your
purchase. Please contact our exceptional Customer Experience
Agents at the email address or phone number shown below to assist
you with any product questions or issues before requesting a return.
We look forward to serving you in a friendly, efficient manner to
resolve any issues you may have.
Customer Service Email: [email protected]
Customer Service Phone: [phone]
Our Warranty Statement
This warranty covers manufacturing defects associated with your new product. The product
is warranted from the original purchase date and to the original purchaser for normal usage,
according to the below-referenced specifications and limitations.
•Non-moving metal parts are warranted for 5 years.
•Component parts including pneumatic cylinder, control mechanism, base and casters are warranted for 2 years.
•All other items are warranted for 1 year.
Normal usage means use in compliance with the restrictions and weight limits specified for
the product. In the absence of product-specific restrictions and weight limits, normal usage
means use for no more than forty hours per week by persons weighing 250 lbs. or less.
Coverage terminates if the product is sold or otherwise transferred. Repairs made by parties
other than Belnick also void this warranty.
This warranty will not cover: (1) labor, freight, or damage from misuse, abuse, negligence,
alteration, assembly, installation, attachments, accident, vandalism, acts of nature or any
other event beyond the control of Belnick; (2) tearing, scratching, scuffing, or blemishing of
leather or fabric; (3) cosmetic damage that may result from normal usage; (4) damage
attributable to use by persons exceeding specified weight limits or commercial use
exceeding forty hours per week; or (5) rust or other damage caused by exposure to
moisture. The user assumes all risk of injury resulting from use of this product. Liability for
incidental or consequential damage is excluded. Some states do not allow the exclusion or
limitation of incidental or consequential damages, so the above limitation or exclusion may
not apply to you.

PARTS
STEP 1
（1） 1
（2） 2
（3） 1
（4）
（4）
1
（5） 1
（6） 1
（7） 1
（8） 1
A 22+1
B 20+1
C 20+1
D 26+1
E 6
F 2
G 1
B
B
B
B
B
B
B
B
BB
BB
B
B
B
B
B
B
B
B
A
A
A
A
A
A
A
A
A
AA
A
A
A
A
A
A
A
A
A
AA
B*20
A*22
（1）
（2）
（2）
（3）
（5）
（8）
M6*25
M6*55
Right Leg
Left Leg
Top Panel
End Panel
Modesty Panel
Divider Panel
Bottom Panel
Bottom Brace
Cam Lock
Dowel
Cam Cover
Allen Wrench
Cam Pin
Bolt
Bolt

STEP 2
STEP 3
（6）
（7）
（8）
F
F
F*2
G
E
E
E
E
E
E
E*6
G
（5）

STEP 4
STEP 5
C
C
C
C
Unlock
Lock
C*4
C
C
CC
Unlock
Lock
C*6
C*2
（2）
（2）
（3）

Unlock
Lock
C*2
STEP 6
STEP 7
C
C
D
D
D * 3
D * 6
D
Unlock
Lock
（4）
（1）
C*8D*20
CC
C
C
C