Flash Furniture ZG-029-60-WAL-GG User manual

Thank you for your purchase!
TV Stand wi t h
Ad jus ta ble S helves
ASSEMBLY INSTRUCTIONS

 



 




DO NOT ALLOW CHILDREN TO CLIMB ON FURNITURE

 



Customer Service Email: [email protected] I Phone: [phone]
Z G-0 29 - 6 0-W AL -GG / Z G-0 29 - 6 0-GY-GG

Have a Question/Concern?
Quality products and first-class customer service are the cornerstone of long-
lasting consumer relationships. We strive toward excellence in all we do and
want you to be completely satisfied with your purchase.
Please contact our exceptional Customer Experience Agents at the email
address or phone number shown below to assist you with any product
questions or issues before requesting a return.
We look forward to serving you in a friendly, efficient manner to resolve any
issues you may have.
Customer Service Email: CustomerExpe[email protected]
Customer Service Phone: [phone]
Our Warranty Statement
This warranty covers manufacturing defects associated with your new product. The product
is warranted from the original purchase date and to the original purchaser for normal usage,
according to the below-referenced specifications and limitations.
Non-moving metal parts are warranted for 5 years.
Component parts including pneumatic cylinder, control mechanism, base and casters
are warranted for 2 years.
All other items are warranted for 1 year.
Normal usage means use in compliance with the restrictions and weight limits specified for
the product. In the absence of product-specific restrictions and weight limits, normal usage
means use for no more than forty hours per week by persons weighing 250 lbs. or less.
Coverage terminates if the product is sold or otherwise transferred. Repairs made by
parties other than Belnick also void this warranty.
This warranty will not cover: (1) labor, freight, or damage from misuse, abuse, negligence,
alteration, assembly, installation, attachments, accident, vandalism, acts of nature or any
other event beyond the control of Belnick; (2) tearing, scratching, scuffing, or blemishing of
leather or fabric; (3) cosmetic damage that may result from normal usage; (4) damage
attributable to use by persons exceeding specified weight limits or commercial use
exceeding forty hours per week; or (5) rust or other damage caused by exposure to
moisture. The user assumes all risk of injury resulting from use of this product. Liability for
incidental or consequential damage is excluded. Some states do not allow the exclusion or
limitation of incidental or consequential damages, so the above limitation or exclusion may
not apply to you.

Safety and Care Advice
Important – Please read these instructions fully before starting assembly
• Check you have all the
components and tools listed on
the following pages.
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
Care and maintenance
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
Handy Hints
• Assemble all parts and bolts
loosely during assembly, only
once the product is complete
should you fully tighten the bolts
• Regularly check and ensure
tightend properly.
• During assembly do not stand
or put weight on the product,
this could cause damage.
• Assemble the item as close
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
• Parts of the assembly will be
easier with 2 people.
• To reduce
the likelihood of
damaging your
product please
ensure that your
power drill is set on a low torque
setting.
WARNING
In order to help prevent overturning –
To help prevent product toppling over please follow the below steps:-
Do not open more than one drawer at a time
Do not place heavy items in the top drawers
Do not place heavy items on top of the furniture, unless the furniture has been
designed for this purpose
You will need to provide wall plugs and screws applicable for your wall type
1
!
• Remove all fittings from the
to its final position (in the same
unit or your floor.
That all bolts and fittings are
please follow these instructions
Do not allow children to climb or hang on the furniture
Use the anti tip stap or wall fixing method provided (if applicable)
Please note that only the anti tip strap is provided.

Components - Fittings
Note:
may be supplied than are required.
Male Camlock x 8
A
D
Shelf Support Pin x 12
Female Camlock x 8
B C
Wood Dowel x 16
Tools required
Phillips screwdriver
(medium & large)
Ruler - Use this ruler to help correctly identify the screws
0
The screws length is measured from the head to the point (30mm screw shown).
Please check you have all the panels listed below
The quantities below are the correct amount to complete the assembly. In some cases more fittings
E
6*50mm Screw x 8
F
3.5*14mm Screw x 28
G H I
4*14mm Screw x 24
JL
Allen Wrench x 1
Plastic wedge x 12
Handle x 2
K
Anti-Tip Hardware Pack x 2
Hinge x 4
5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170

Using Camlocks
12
DO NOT OVER TIGHTEN.
NE PAS SERRER EXCESSIVEMENT.
34
4
Step 1
Step 3
Step 2
Step 4
Connect the male
camlock as diected in
the assembly instructions
using a scewdriver.
Push the male camlock
into the entry hole.
Insert the female
camlock as shown in the
instruction.
Note：ensure that the
arrow on the top of the
camlock points towards
the entry hole for the
male camlock.
Turn the female camlock
clockwise with a
screwdriver.
You should feel a click
when the camlock is
locked in place.
The joint is now secure.
Adjusting Hinges
Hinge adjustment:
a: To move the top panel up
or down, loosen screws
shown and move top panel to
suit
b.To move the top panel in or
out, loosen screws shown
and move top panel to suit.
Retighten screws
C:To move the top panel left
or right, adjust screws
shown.
b:
a:
c:

Assembly Instructions
Left door
Right door
Top Panel
Left Rear panel
Right Rear panel
Rear Center panel
Bottom Panel
Legs
Legs
Legs
Legs
Middle Leg
Left Panel
Right Panel
Left Center Panel
Right Center Panel
Left Shelf Panel
Center Shelf Panel
Right Shelf Panel
Middle Leg

Assembly Instructions
Step 1
Step 2
1
A
A
A
A
A
A
A
A
Insert Male Camlocks (Part A)
into Top Panel (Part 1)
C
C
C
CC
C
C
C
C
C
C
C
C
C
C
C
Insert (16) Dowel Rods (Part C) into the inside holes on End Panels
(Part 3) & (Part 6) and Inner Panels (Part 4 & Part 5).
6
453

Assembly Instructions
Step 3
Step 4
BB
BB
BB
BB
3
4
5
6
1
Insert (8) Female Camlocks (Part B) into Panels 3,4,5, &6
ensuring the arrows are pointing toward the insertion hole.Place
Top Panel (Part 1) onto the assembled frame and insert Male
Camlocks into the Female Camlocks. Tighten using a
PhillipsScrewdriver.
3
4
5
6
8
7
7
Insert Left and Right Back Panels
(Part 7) and Middle Panel (Part 8) into
the rear slots of panels 3, 4, 5, & 6.
NOTE:
Ensure slot is facing the
rear.

Assembly Instructions
Step 5
Step 6
5
6
3
4
1
2
F
E
E
E
E
E
E
E
E
Insert panels 3, 4, 5, & 6 into the
bottom Panel (Part 2) ensuring the
slots are aligned with the bottom panel slot.
Attach panels using (8) 6*50mm
Screws (Part E). Tighten with Allen
Wrench (Part F).
NOTE:
Ensure Dowel Rods are fully
seated before panels are
permanently attached.
2
6
5
4
3
11
11
11
11
12
12
Attach Side Legs (Part 11) and
Middle Legs (Part 12) to Bottom
Panel (Part 2) using (24) 4*14mm
Screws (Part I). Tighten using a
Phillips Screwdriver (not included)
I
II
I
1

Assembly Instructions
Step 7
Step 8
Insert (12) Plastic Wedges (Part J) into the upper,
lower, and side slots between the back panel and
frame. Attach wedges using the included screws.
J
J
7
7
8
DD
DD
D
D
D
D
D
D
D
D
D
Insert (12) Shelf Support Pins (Part D) into the holes
on the inside of the cabinets.
3
4
5
6
1
2

Assembly Instructions
Step 9
Step 10
9
9
10
Place (2) Side Shelves (Part 9) and the Middle Shelf (Part 10) onto
the Shelf Support Pins.
14 13
K
KK
K
HH
HH
H
HH
H
HH
H
H
GG
Attach (4) Hinges (Part K) using (8) 3.5*14mm Screws (Part H).
Attach (2) Handles (Part G) using (4) 3.5*14mm Screws (Part H).

Assembly Instructions
Step 11
Step 12
14
K
HH
HH
Attach left door hinge to the cabinet using (8) 3.5*14mm Screws (Part H).
Attach left door hinge to the cabinet using (8) 3.5*14mm Screws (Part H).
K
H
H
H
H
14
13

Assembly Instructions
Step 13
Step 14
unit is secured to the
The unit is floor
standing, but it is
recommended that the
wall.
1. Move the unit into
desired position.
2. Mark the wall with a
suitable scribe the
position of the fixing
holes.
Warning:
Before driling,check
wall for hidden pipes
and cables.
3. Drill holes and insert 2 x
wall plug
4. Attach 2 x Wall Straps to
to the top of the unit using 2 x
Washers and 2 x Screws
5. Secure the straps to the
wall using 2 x Washers
and 2 x Screws
Note: To hide the straps
behind the unit, drill the
holes lower than the top of
the unit
!
L
L
L
Wall L
Wall