FLIR Raymarine Rotavecta Z195 User manual

R
o t a v e c t a
Installation instructions
English
Date: 06-2014
Document number: 87221-1-EN
© 2014 Raymarine UK Limited
Rotavecta

Trademarkandpatentsnotice
Autohelm,hsb2,RayTechNavigator,SailPilot,SeaTalk,SeaTalkNG,SeaTalkHSandSportpilotareregistered
trademarksofRaymarineUKLimited.RayTalk,Seahawk,Smartpilot,PathnderandRaymarineare
registeredtrademarksofRaymarineHoldingsLimited.
FLIRisaregisteredtrademarkofFLIRSystems,Inc.and/oritssubsidiaries.
Allothertrademarks,tradenames,orcompanynamesreferencedhereinareusedforidenticationonly
andarethepropertyoftheirrespectiveowners.
Thisproductisprotectedbypatents,designpatents,patentspending,ordesignpatentspending.
FairUseStatement
Youmayprintnomorethanthreecopiesofthismanualforyourownuse.Youmaynotmakeanyfurther
copiesordistributeorusethemanualinanyotherwayincludingwithoutlimitationexploitingthemanual
commerciallyorgivingorsellingcopiestothirdparties.
Softwareupdates
Checkthewebsitewww.raymarine.comforthelatestsoftwarereleasesforyourproduct.
Producthandbooks
ThelatestversionsofallEnglishandtranslatedhandbooksareavailabletodownloadinPDFformatfromthewebsite
www.raymarine.com.
Pleasecheckthewebsitetoensureyouhavethelatesthandbooks.
Copyright©2014RaymarineUKLtd.Allrightsreserved.
ENGLISH
Documentnumber:87221-1
Date:06-2014

Contents
Chapter1Importantinformation........................7
CertiedInstallation...................................................7
Wateringress............................................................7
Disclaimer.................................................................7
EMCinstallationguidelines........................................7
Suppressionferrites...................................................7
Connectionstootherequipment.................................8
Declarationofconformity............................................8
Productdisposal........................................................8
Warrantyregistration..................................................8
IMOandSOLAS........................................................8
Technicalaccuracy....................................................8
Chapter2Documentandproduct
information...........................................................9
2.1Documentinformation..........................................10
2.2Furtherinformation...............................................11
2.3Partssupplied......................................................11
Chapter3Planningtheinstallation...................13
3.1Installationchecklist.............................................14
3.2Compatibleinstrumentdisplays.............................14
3.3Typicalsystem.....................................................15
3.4Toolsrequired......................................................16
3.5Warningsandcautions.........................................16
3.6Windvanetransducer/rotavectalocation
requirements.............................................................17
3.7Productdimensions..............................................17
Chapter4Mounting.............................................19
4.1Mountingoptions..................................................20
4.2Surfacemounting.................................................20
4.3Railmounting.......................................................21
Chapter5Cablesandconnections....................23
5.1Generalcablingguidance.....................................24
5.2Cablerouting.......................................................24
5.3Rotavectaconnections.........................................25
Chapter6Operation............................................27
6.1Calibrationandlinearization..................................28
6.2Furtherinformation...............................................28
Chapter7Maintenance.......................................29
7.1Routinechecks....................................................30
7.2Unitcleaninginstructions......................................30
Chapter8Technicalsupport..............................31
8.1Raymarinecustomersupport................................32
Chapter9Technicalspecication......................33
9.1Physicalspecication...........................................34
9.2Conformancespecication....................................34
5

6Rotavecta

Chapter1:Importantinformation
CertiedInstallation
Raymarinerecommendscertiedinstallationbya
Raymarineapprovedinstaller.Acertiedinstallation
qualiesforenhancedproductwarrantybenets.
ContactyourRaymarinedealerforfurtherdetails,
andrefertotheseparatewarrantydocumentpacked
withyourproduct.
Warning:Productinstallationand
operation
Thisproductmustbeinstalledand
operatedinaccordancewiththe
instructionsprovided.Failuretodoso
couldresultinpersonalinjury,damage
toyourvesseland/orpoorproduct
performance.
Warning:Potentialignitionsource
ThisproductisNOTapprovedforusein
hazardous/ammableatmospheres.Do
NOTinstallinahazardous/ammable
atmosphere(suchasinanengineroom
ornearfueltanks).
Warning:Positivegroundsystems
Donotconnectthisunittoasystemwhich
haspositivegrounding.
Caution:Powersupplyprotection
Wheninstallingthisproductensurethe
powersourceisadequatelyprotected
bymeansofasuitably-ratedfuseor
automaticcircuitbreaker.
Caution:Serviceandmaintenance
Thisproductcontainsnouserserviceable
components.Pleasereferallmaintenance
andrepairtoauthorizedRaymarine
dealers.Unauthorizedrepairmayaffect
yourwarranty.
Wateringress
Wateringressdisclaimer
Althoughthewaterproofratingcapacityofthis
productmeetsthestatedIPXstandard(refertothe
product’sTechnicalSpecication),waterintrusion
andsubsequentequipmentfailuremayoccurifthe
productissubjectedtocommercialhigh-pressure
washing.Raymarinewillnotwarrantproducts
subjectedtohigh-pressurewashing.
Disclaimer
Raymarinedoesnotwarrantthatthisproductis
error-freeorthatitiscompatiblewithproducts
manufacturedbyanypersonorentityotherthan
Raymarine.
Raymarineisnotresponsiblefordamagesorinjuries
causedbyyouruseorinabilitytousetheproduct,
bytheinteractionoftheproductwithproducts
manufacturedbyothers,orbyerrorsininformation
utilizedbytheproductsuppliedbythirdparties.
EMCinstallationguidelines
Raymarineequipmentandaccessoriesconformto
theappropriateElectromagneticCompatibility(EMC)
regulations,tominimizeelectromagneticinterference
betweenequipmentandminimizetheeffectsuch
interferencecouldhaveontheperformanceofyour
system
CorrectinstallationisrequiredtoensurethatEMC
performanceisnotcompromised.
Note:InareasofextremeEMCinterference,
someslightinterferencemaybenoticedonthe
product.Wherethisoccurstheproductandthe
sourceoftheinterferenceshouldbeseparatedby
agreaterdistance.
ForoptimumEMCperformancewerecommend
thatwhereverpossible:
•Raymarineequipmentandcablesconnectedto
itare:
–Atleast1m(3ft)fromanyequipment
transmittingorcablescarryingradiosignalse.g.
VHFradios,cablesandantennas.Inthecase
ofSSBradios,thedistanceshouldbeincreased
to7ft(2m).
–Morethan2m(7ft)fromthepathofaradar
beam.Aradarbeamcannormallybeassumed
tospread20degreesaboveandbelowthe
radiatingelement.
•Theproductissuppliedfromaseparatebattery
fromthatusedforenginestart.Thisisimportantto
preventerraticbehavioranddatalosswhichcan
occuriftheenginestartdoesnothaveaseparate
battery.
•Raymarinespeciedcablesareused.
•Cablesarenotcutorextended,unlessdoingsois
detailedintheinstallationmanual.
Note:Whereconstraintsontheinstallation
preventanyoftheaboverecommendations,
alwaysensurethemaximumpossibleseparation
betweendifferentitemsofelectricalequipment,to
providethebestconditionsforEMCperformance
throughouttheinstallation
Suppressionferrites
Raymarinecablesmaybettedwithsuppression
ferrites.TheseareimportantforcorrectEMC
performance.Ifaferritehastoberemovedforany
Importantinformation7

purpose(e.g.installationormaintenance),itmustbe
replacedintheoriginalpositionbeforetheproduct
isused.
Useonlyferritesofthecorrecttype,suppliedby
Raymarineauthorizeddealers.
Whereaninstallationrequiresmultipleferritestobe
addedtoacable,additionalcableclipsshouldbe
usedtopreventstressontheconnectorsduetothe
extraweightofthecable.
Connectionstootherequipment
Requirementforferritesonnon-Raymarinecables
IfyourRaymarineequipmentistobeconnected
tootherequipmentusingacablenotsuppliedby
Raymarine,asuppressionferriteMUSTalwaysbe
attachedtothecableneartheRaymarineunit.
Declarationofconformity
RaymarineUKLtd.declaresthatthisproductis
compliantwiththeessentialrequirementsofEMC
directive2004/108/EC.
TheoriginalDeclarationofConformitycerticate
maybeviewedontherelevantproductpageat
www.raymarine.com.
Productdisposal
Disposeofthisproductinaccordancewiththe
WEEEDirective.
TheWasteElectricalandElectronicEquipment
(WEEE)Directiverequirestherecyclingofwaste
electricalandelectronicequipment.Whilstthe
WEEEDirectivedoesnotapplytosomeRaymarine
products,wesupportitspolicyandaskyoutobe
awareofhowtodisposeofthisproduct.
Warrantyregistration
ToregisteryourRaymarineproductownership,
pleasevisitwww.raymarine.comandregisteronline.
Itisimportantthatyouregisteryourproductto
receivefullwarrantybenets.Yourunitpackage
includesabarcodelabelindicatingtheserialnumber
oftheunit.Youwillneedthisserialnumberwhen
registeringyourproductonline.Youshouldretain
thelabelforfuturereference.
IMOandSOLAS
Theequipmentdescribedwithinthisdocument
isintendedforuseonleisuremarineboatsand
workboatsNOTcoveredbyInternationalMaritime
Organization(IMO)andSafetyofLifeatSea
(SOLAS)CarriageRegulations.
Technicalaccuracy
Tothebestofourknowledge,theinformationinthis
documentwascorrectatthetimeitwasproduced.
However,Raymarinecannotacceptliabilityforany
inaccuraciesoromissionsitmaycontain.Inaddition,
ourpolicyofcontinuousproductimprovementmay
changespecicationswithoutnotice.Asaresult,
Raymarinecannotacceptliabilityforanydifferences
betweentheproductandthisdocument.Please
checktheRaymarinewebsite(www.raymarine.com)
toensureyouhavethemostup-to-dateversion(s)of
thedocumentationforyourproduct.
8Rotavecta

Chapter2:Documentandproductinformation
Chaptercontents
•2.1Documentinformationonpage10
•2.2Furtherinformationonpage11
•2.3Partssuppliedonpage11
Documentandproductinformation9

2.1Documentinformation
Thisdocumentcontainsimportantinformation
relatedtotheinstallationofyourRaymarineproduct.
Thedocumentincludesinformationtohelpyou:
•planyourinstallationandensureyouhaveallthe
necessaryequipment;
•installandconnectyourproductaspartofawider
systemofconnectedmarineelectronics;
•troubleshootproblemsandobtaintechnical
supportifrequired.
ThisandotherRaymarineproductdocuments
areavailabletodownloadinPDFformatfrom
www.raymarine.com.
Applicableproducts
Thisdocumentisapplicabletothefollowingproducts:
PartnumberDescription
Z195Rotavectawind
transducercapable
ofprovidingboth
windspeedandwind
directiondata.
Productdocumentation
Thefollowingdocumentationisapplicabletoyour
product:
DescriptionPartnumber
RotavectaInstallationinstructions
InstallationofaRotavectawindtransducer
andconnectiontoawidersystemofmarine
electronics.
87221/
88036
i40Installationandoperationinstructions
Detailstheconnectionandoperationofthe
instrumentdisplayinconjunctionwiththe
Rotavecta.
81340
i60Installationandoperationinstructions
Detailstheconnectionandoperationofthe
instrumentdisplayinconjunctionwiththe
Rotavecta.
81342
iTC-5Installationinstructions
DetailstheconnectionofaRotavectawind
transducertoawidersystemofmarine
electronics
87138
Documentillustrations
Yourproductmaydifferslightlyfromthatshown
intheillustrationsinthisdocument,dependingon
productvariantanddateofmanufacture.
Allimagesareprovidedforillustrationpurposesonly.
10Rotavecta

2.2Furtherinformation
Fordetailedoperatinginstructions,refertothe
handbookthataccompaniesyourdisplay.
2.3Partssupplied
Thefollowingitemsaresuppliedwithyourproduct.
D13100-1
1
3
5
6
7
8
2
49
1.Rotavectaassembly(including20m/65.6ft.
cable)
2.Fixingsx2
3.Retainingring
4.Nut
5.Seal
6.Packingpiecesx2
7.Railclamp
8.Grubscrew
9.Documentationpack
Documentandproductinformation11

12Rotavecta

Chapter3:Planningtheinstallation
Chaptercontents
•3.1Installationchecklistonpage14
•3.2Compatibleinstrumentdisplaysonpage14
•3.3Typicalsystemonpage15
•3.4Toolsrequiredonpage16
•3.5Warningsandcautionsonpage16
•3.6Windvanetransducer/rotavectalocationrequirementsonpage17
•3.7Productdimensionsonpage17
Planningtheinstallation13

3.1Installationchecklist
Installationincludesthefollowingactivities:
InstallationTask
1Planyoursystem.
2Obtainallrequiredequipmentandtools.
3Siteallequipment.
4Routeallcables.
5Drillcableandmountingholes.
6Makeallconnectionsintoequipment.
7Secureallequipmentinplace.
8Poweronandtestthesystem.
Schematicdiagram
Aschematicdiagramisanessentialpartofplanning
anyinstallation.Itisalsousefulforanyfuture
additionsormaintenanceofthesystem.The
diagramshouldinclude:
•Locationofallcomponents.
•Connectors,cabletypes,routesandlengths.
3.2Compatibleinstrumentdisplays
Thefollowinginstrumentdisplaysarecompatible
withyourwindtransducer.
TackTrue/AppDisplay VMG
ST40
D13099-1
1
4
2
5
3
67
DescriptionComments
1ST40WindDirectconnection
2ST60+WindDirectconnection
3ST70ViaiTC-5converteror
transducerpod
4i40WindDirectconnection
5ST70+ViaiTC-5converteror
transducerpod
6i60WindDirectconnection
7i70ViaiTC-5converteror
transducerpod
14Rotavecta

3.3Typicalsystem
iTC-5systemexample
12 V
D13101-1
4
3
56
1 1 1 2
SeaTalk
ng
1SeaTalknginstrumentdisplays
2Rotavectawindtransducer
312Vdcpowersupply
4iTC-5converter
5Depthtransducer
6Speedtransducer
SeaTalkngsystemexample
TackTrue/AppDisplay VMG
12 V dc
D13102-1
3
2
54
1
SeaTalk
ng
SeaTalk
ng
768
1Rotavectawindtransducer
2Windinstrumentdisplay(SeaTalkng)
3Multifunctiondisplay
4Speedinstrumentdisplay(SeaTalkng)
5Depthinstrumentdisplay(SeaTalkng)
612Vdcpowersupply
7Depthtransducer
8Speedtransducer
SeaTalksystemexample
12 V
D12343-2
567
1
3
2
4
SeaTalk
1Depthinstrumentdisplay(SeaTalk)
2Speedinstrumentdisplay(SeaTalk)
3Windinstrumentdisplay(SeaTalk)
4Rotavectawindtransducer
5Depthtransducer
6Speedtransducer
712Vdcpowersupply
Planningtheinstallation15

3.4Toolsrequired
Productinstallationrequiresthefollowingtools:
ItemDescriptionQuantity
Powerdrill1
Pozidrivescrewdriver1
Drillbitofappropriatesize*1
Note:*Theappropriatedrillbitsizeisdependent
onthethicknessandmaterialofthemounting
surface.
3.5Warningsandcautions
Important:Beforeproceeding,ensurethatyou
havereadandunderstoodthewarningsand
cautionsprovidedintheChapter1Important
informationsectionofthisdocument.
16Rotavecta

3.6Windvanetransducer/rotavecta
locationrequirements
Whenselectingalocationforyourwindtransducerit
isimportanttoconsideranumberoffactors.
Thetransducer'slocationmust:
•Allowreasonableaccessforinstallationand
servicing.
•Beashighaspossibleandawayfromany
equipmentwhichmayshieldthetransduceror
otherwisedisturbtheairow.
•Provideahorizontalmountingsurface.Ifasurface
(e.g.masttop)isotherwisesuitablebutnot
horizontal,makeupasuitablewedgedpacking
piecetoprovidethenecessaryhorizontalsurface.
•Theremustalsobeaviablerouteforthe
transducercabletoberoutedtotheproductitisto
beconnectedto(i.e.displayorconverter).
Compasssafedistance
Topreventpotentialinterferencewiththevessel's
magneticcompasses,ensureanadequatedistance
ismaintainedfromtheproduct.
Whenchoosingasuitablelocationfortheproduct
youshouldaimtomaintainthemaximumpossible
distancefromanycompasses.Typicallythisdistance
shouldbeatleast1m(3ft)inalldirections.However
forsomesmallervesselsitmaynotbepossibleto
locatetheproductthisfarawayfromacompass.In
thissituation,whenchoosingtheinstallationlocation
foryourproduct,ensurethatthecompassisnot
affectedbytheproductwhenitisinapoweredstate.
3.7Productdimensions
D13103-1
Approx426 mm (16.8 in.)
70 mm (2.8 in.)
187 mm (7.4 in.)
Planningtheinstallation17

18Rotavecta

Chapter4:Mounting
Chaptercontents
•4.1Mountingoptionsonpage20
•4.2Surfacemountingonpage20
•4.3Railmountingonpage21
Mounting19

4.1Mountingoptions
TheRotavectacanbesurfaceorrailmounted.
12
D13104-1
1.Surfacemount
2.Railmount
4.2Surfacemounting
Followthestepsbelowtosurfacemountyouruniton
amasttoporradararch.
D13105-1
Surfacemountingtheunitonahorizontalsurface
willprovideoptimumperformance.Ifthemounting
surfaceisnothorizontal,useapackingwedge(not
supplied)tomakesurethattheunitisvertical.
D13106-1
1.Usingtheretainingringmarkoutthelocationof
thescrewholesonthemountingsurface.
2.Drillthe2screwholesusingasuitablesizeddrill
bit.
3.Passthecablethroughtheretainingringandnut.
4.Fittheretainingringtothebaseoftheunit.
5.Securetheunittotheretainingringusingthenut.
6.Alignthescrewholesinthesealwiththe2drilled
holesinthemountingsurface.
7.Placethesealonthemountingsurfacesothat
thescrewholeslineupwiththedrilledholesin
themountingsurface.
8.Positiontherotavectaontopofthesealsothat
theretainingringholeslineupwiththedrilled
holesinthemountingsurface.
9.Securetheunittothemountingsurfaceusingthe
screwsprovided,ensuringthatthecablefeeds
throughtheretainingring’scablechannel.
D13107-1
20Rotavecta