FLIR T420 User manual

QuickStart: Flir T420, 430, 440, 450, 460
(Including bx & cs models)
© 2015 The Snell Group / 322 N. Main St./ Barre, VT 05641 / 800.636.9820 / www.thesnellgroup.com
Flir T420,430, 440, 450, 460 (including bx & cs models) Page 1
Power
Recall
Digital Zoom
Auto–Focus
/Save
Laser
Camera Lamp
Auto/ Manual
Joystick
Focus
Back Button
Programmable
Button
Touch-screen LCD
SD storage
Digital Camera
Laser
IR Lens
Digital Camera Lamp
1. MEMORY:
Insert an SD memory card the slot under the cover on bottom of the camera.
2. POWER:
Insert a charged battery into the battery bay on the bottom of the camera.
3. START/STOP:
Press the Power button. Press and hold to turn off.
4. FOCUS:
Manual Focus: Slide the Focus Button on front of the hand grip either to the left or right.
Auto Focus: press the silver Auto-Focus/Save button half way down.
5. AUTO ADJUST) : (Level and Span)
In Live mode: pressing the Auto/Manual button will toggle between Auto mode and Manual mode. The
icon will be displayed in manual mode.
6. MANUAL ADJUST: (Level and Span)
Press the Auto/Manual button until the appears in the image viewing screen.
To change the temperature scale minimum and maximum values at the same time, move the Joystick
up or down.
To change the minimum or maximum values independently, first move the Joystick left or right to
select a value (it will now be highlighted).
Move the Joystick up or down to change the highlighted value.
NOTE: When in Preview or Edit mode, pressing the Auto/Manual button will perform a one-time auto adjust,
yet keep you in the Manual mode.

QuickStart: Flir T420, 430, 440, 450, 460
(Including bx & cs models)
© 2015 The Snell Group / 322 N. Main St./ Barre, VT 05641 / 800.636.9820 / www.thesnellgroup.com
Flir T420,430, 440, 450, 460 (including bx & cs models) Page 2
7. PREVIEW and SAVE/ IMAGE:
To preview the image push the Auto Focus/Save button all the way down, this will freeze or preview the
image.
At this time the image can be manually adjusted (as above) if needed.
If this is not an image you wish to save press the Back button to exit without saving.
To save the image press the Auto-Focus/Save button all the way down again.
8. RECALL IMAGE:
Press the Recall button
Move the Joystick left, right, up or down to select the image you wish to view.
Press the Joystick to display the image.
9. PALETTE:
Push the Joystick to Display the
Main Menu [FIG 1.].
Use the Joystick to highlight
the Color Icon.
Press the Joystick to display
the submenu.
Highlight the desired palette,
press in on the Joystick to
select.
10. RANGE:
Push the Joystick to Display the
Main Menu [FIG 1.].
Use the Joystick to highlight
the Settings Icon.
Press the Joystick to display
the submenu.
Select Device Settings and
push Joystick.
Select Set up Camera and
push Joystick.
Select Camera Temperature Range and push Joystick.
Select the desired range and push Joystick.
11. EMISSIVITY and REFLECTIVE TEMP:
Push the Joystick to Display the Main Menu [FIG 1.].
Use the Joystick to highlight the Parameters Icon.
Press the Joystick to display the submenu.
Select Emissivity or Reflective Temperature then press the Joystick to display a dialog box.
Use the Joystick to change the selected parameter then press the Joystick to select and close.
T420, T430, T440, T450, T460, including bx and sc models
FIG 1. Push the Joystick or Touch the LCD Screen
to Display the Main Menu
Submenu
Main Menu
Recording
Mode
Parameters
Image
Mode
Measurement
Color
Toolbar
Settings
IFOV =1.4 mRad (Theoretical with 320x240 Detector and standard 25˚ lens) Detect 1in. target @ 60ft.