Fluke ThermoView TV40 Series User manual

ThermoView®TV40 Series
Thermal Imager Camera
Users Manual
PN 5015206, English, Rev. 1.1, Apr 2019
© 2019 Fluke Process Instruments. All rights reserved. Printed in Germany. Specifications subject to change without notice.
All product names are trademarks of their respective companies.
www. .com [e-mail]1.800.561.8187

Warranty
The manufacturer warrants this instrument to be free from defects in material and workmanship under normal use
and service for the period of two years from date of purchase. This warranty extends only to the original purchaser.
This warranty shall not apply to fuses, batteries or any product which has been subject to misuse, neglect, accident,
or abnormal conditions of operation.
In the event of failure of a product covered by this warranty, the manufacturer will repair the instrument when it is
returned by the purchaser, freight prepaid, to an authorized Service Facility within the applicable warranty period,
provided manufacturer’s examination discloses to its satisfaction that the product was defective. The manufacturer
may, at its option, replace the product in lieu of repair. With regard to any covered product returned within the
applicable warranty period, repairs or replacement will be made without charge and with return freight paid by the
manufacturer, unless the failure was caused by misuse, neglect, accident, or abnormal conditions of operation or
storage, in which case repairs will be billed at a reasonable cost. In such a case, an estimate will be submitted
before work is started, if requested.
The foregoing warranty is in lieu of all other warranties, expressed or implied, including but not limited to any
implied warranty of merchantability, fitness, or adequacy for any particular purpose or use. The manufacturer shall
not be liable for any special, incidental or consequential damages, whether in contract, tort, or otherwise.
Software Warranty
The manufacturer does not warrant that the software described herein will function properly in every hardware and
software environment. This software may not work in combination with modified or emulated versions of Windows
operating environments, memory-resident software, or on computers with inadequate memory. The manufacturer
warrants that the program disk is free from defects in material and workmanship, assuming normal use, for a period
of one year. Except for this warranty, the manufacturer makes no warranty or representation, either expressed or
implied, with respect to this software or documentation, including its quality, performance, merchantability, or
fitness for a particular purpose. As a result, this software and documentation are licensed “as is,” and the licensee
(i.e., the User) assumes the entire risk as to its quality and performance. The liability of the manufacturer under
this warranty shall be limited to the amount paid by the User. In no event shall the manufacturer be liable for any
costs including but not limited to those incurred as a result of lost profits or revenue, loss of use of the computer
software, loss of data, the cost of substitute software, claims by third parties, or for other similar costs. The
manufacturer’s software and documentation are copyrighted with all rights reserved. It is illegal to make copies for
another person.
Disclaimer for Export Control Classification
These products are controlled under ECCN 6A003.B.4.B and an export license is needed for certain destinations.
Please see RS1 controls for licensing requirements.
www. .com [e-mail]1.800.561.8187

Table of Contents
Chapter Page
TABLE OF CONTENTS ................................................................................................................................................ 3
LIST OF TABLES ....................................................................................................................................................... 6
LIST OF FIGURES ...................................................................................................................................................... 7
COMPLIANCE STATEMENT ......................................................................................................................................... 9
SAFETY INFORMATION............................................................................................................................................. 10
CONTACTS............................................................................................................................................................. 13
1DESCRIPTION....................................................................................................................................................... 14
1.1 Available Models .............................................................................................................................................................................................15
1.2 System Architecture........................................................................................................................................................................................16
2TECHNICAL DATA................................................................................................................................................. 17
2.1 Measurement Specification.............................................................................................................................................................................17
2.2 Optical Specifications......................................................................................................................................................................................18
2.2.1 Standard Lens........................................................................................................................................................................................18
2.3 Electrical Specifications ..................................................................................................................................................................................19
2.4 PC Specifications............................................................................................................................................................................................19
2.5 Environmental Specifications..........................................................................................................................................................................19
2.6 Dimensions......................................................................................................................................................................................................20
2.7 Scope of Delivery............................................................................................................................................................................................20
3BASICS ............................................................................................................................................................... 21
3.1 Measurement of Infrared Temperature...........................................................................................................................................................21
3.2 Emissivity of Target Object .............................................................................................................................................................................21
4ENVIRONMENT ..................................................................................................................................................... 22
4.1 Ambient Temperature .....................................................................................................................................................................................22
4.2 Atmospheric Quality........................................................................................................................................................................................22
4.3 Protection ........................................................................................................................................................................................................22
4.4 Electrical Interference .....................................................................................................................................................................................22
5INSTALLATION...................................................................................................................................................... 23
5.1 Positioning.......................................................................................................................................................................................................23
5.2 Distance to Object...........................................................................................................................................................................................23
5.3 Focusing..........................................................................................................................................................................................................23
5.4 Mounting..........................................................................................................................................................................................................23
5.5 Network ...........................................................................................................................................................................................................24
5.6 Cabling ............................................................................................................................................................................................................24
5.6.1 Ethernet M12 Cable...............................................................................................................................................................................24
5.6.2 Power Supply Cable ..............................................................................................................................................................................26
www. .com [e-mail]1.800.561.8187

6OPERATION..........................................................................................................................................................27
6.1 GigE Vision Communication........................................................................................................................................................................... 27
6.2 LED Status Indicator....................................................................................................................................................................................... 28
6.3 Shutter............................................................................................................................................................................................................. 29
6.4 Web Server Application.................................................................................................................................................................................. 30
6.4.1 Establishing Communication................................................................................................................................................................. 30
6.4.2 Camera Info........................................................................................................................................................................................... 30
6.4.3 Camera Access ..................................................................................................................................................................................... 30
6.4.4 Network Configuration........................................................................................................................................................................... 31
6.4.5 Focus Control ........................................................................................................................................................................................ 32
6.4.6 Field of View.......................................................................................................................................................................................... 32
6.4.7 Temperature Unit................................................................................................................................................................................... 32
6.4.8 Emissivity............................................................................................................................................................................................... 32
7ACCESSORIES ......................................................................................................................................................33
7.1 Add-on Lenses................................................................................................................................................................................................ 33
7.1.1 Wide Lens 0.75x.................................................................................................................................................................................... 34
7.1.1 Tele Lens 2x.......................................................................................................................................................................................... 35
7.1.2 Tele Lens 4x.......................................................................................................................................................................................... 36
7.1.3 Macro TV43........................................................................................................................................................................................... 37
7.1.4 Macro TV46........................................................................................................................................................................................... 37
7.2 Electrical Accessories..................................................................................................................................................................................... 38
7.2.1 Ethernet PoE Cable (A-CB-xx-M12-W08-xx)........................................................................................................................................ 39
7.2.2 Power Supply Cable (A-CB-xx-PS-xx).................................................................................................................................................. 40
7.2.3 Ethernet Cable (A-CB-LT-RJ45-25)...................................................................................................................................................... 41
7.2.4 Ethernet Cable Short (A-CB-LT-RJ45-03) ............................................................................................................................................ 41
7.2.5 Fiber Optic Cable (A-CB-FO-xxx) ......................................................................................................................................................... 42
7.2.6 PoE Injector (A-TV-POE1) .................................................................................................................................................................... 43
7.2.7 PoE Injector Industrial (A-TV-POE2)..................................................................................................................................................... 44
7.2.8 Power Supply DIN Rail (A-PS-DIN-24V)............................................................................................................................................... 46
7.2.9 Fiber Optic to Ethernet Converter (A-CON-FO-RJ45).......................................................................................................................... 47
7.2.10 Ethernet Switch (A-CON-SW)............................................................................................................................................................. 49
7.2.11 I/O Modules ......................................................................................................................................................................................... 51
7.3 Mechanical Accessories................................................................................................................................................................................. 52
7.3.1 Mounting Base (A-TV-MB) .................................................................................................................................................................... 53
7.3.2 Air Purge Collar (A-TV-AP) ................................................................................................................................................................... 54
7.3.3 Water Cooling Enclosure (A-TV-AP-WC).............................................................................................................................................. 56
7.3.4 Protective Enclosure (A-TV-WC) .......................................................................................................................................................... 58
7.3.4.1 Air Barrier ........................................................................................................................................................................................ 58
7.3.4.2 Specification.................................................................................................................................................................................... 59
7.3.4.3 Installation ....................................................................................................................................................................................... 60
7.3.5 Outdoor Enclosure (A-TV-ENC)............................................................................................................................................................ 64
7.3.5.1 Specification.................................................................................................................................................................................... 64
www. .com [e-mail]1.800.561.8187

7.3.5.2 Installation........................................................................................................................................................................................65
7.3.6 Swivel Bracket (A-BR-S)........................................................................................................................................................................69
7.3.7 Junction Box (A-TV-JB) .........................................................................................................................................................................70
7.3.8 Protective Windows (A-TV-PW).............................................................................................................................................................71
8MAINTENANCE ..................................................................................................................................................... 72
8.1 Fail-Safe Operation.........................................................................................................................................................................................72
8.2 Troubleshooting...............................................................................................................................................................................................72
8.3 Cleaning the Lens ...........................................................................................................................................................................................73
9APPENDIX ........................................................................................................................................................... 74
9.1 Field of View Calculator ..................................................................................................................................................................................74
9.2 Avoidance of Condensation............................................................................................................................................................................75
9.3 Determination of Emissivity.............................................................................................................................................................................76
9.4 Typical Emissivity Values................................................................................................................................................................................76
www. .com [e-mail]1.800.561.8187

List of Tables
Table Page
Table 7-1: Available Ethernet PoE Cables............................................................................................................39
Table 7-2: Available Power Supply Cables...........................................................................................................40
Table 8-3: Troubleshooting...................................................................................................................................72
Table 9-4: Minimum device temperatures [°C/°F].................................................................................................75
www. .com [e-mail]1.800.561.8187

List of Figures
Figure Page
Figure 1-1: Front and Rear View of ThermoView Series infrared cameras.......................................................... 14
Figure 1-2: Available Models................................................................................................................................ 15
Figure 1-3: System Architecture for Multiple Cameras and I/O Modules.............................................................. 16
Figure 2-1: Dimensions of ThermoView TV40 ..................................................................................................... 20
Figure 5-1: Field of View for the Camera ............................................................................................................. 23
Figure 5-2: Principal Cabling of Ethernet and Power Supply ............................................................................... 24
Figure 5-3: Connecting the Ethernet M12 Cable to the Camera .......................................................................... 25
Figure 5-4: Exemplary Ethernet M12 Cable......................................................................................................... 25
Figure 5-5: Exemplary Power Supply Cable and Power Connector..................................................................... 26
Figure 6-1: LED Status Indicator.......................................................................................................................... 28
Figure 6-2: Web Server Application ..................................................................................................................... 30
Figure 6-3: Dialog Box for Uploading new Firmware............................................................................................ 31
Figure 6-4: Dialog Box for the Network Configuration.......................................................................................... 31
Figure 7-1: Dimensions of ThermoView TV40 with Wide Lens ............................................................................ 34
Figure 7-2: Dimensions of ThermoView TV40 with Tele Lens 2x......................................................................... 35
Figure 7-3: Dimensions of ThermoView TV40 with Tele Lens 4x......................................................................... 36
Figure 7-4: Exemplary Ethernet PoE LT Cable.................................................................................................... 39
Figure 7-5: Exemplary Power Supply Cable ........................................................................................................ 40
Figure 7-6: Ethernet Cable................................................................................................................................... 41
Figure 7-7: Ethernet Cable Short ......................................................................................................................... 41
Figure 7-8: PoE Injector for Office Environments................................................................................................. 43
Figure 7-9: PoE Injector for Industrial Environments............................................................................................ 44
Figure 7-10: Dimensions...................................................................................................................................... 44
Figure 7-11: Industrial Power Supply............................................................................................................... 46
Figure 7-12: Fiber Optic to Ethernet Converter.................................................................................................... 47
Figure 7-13: Dimensions...................................................................................................................................... 47
Figure 7-14: Ethernet Switch................................................................................................................................ 49
Figure 7-15: Dimensions...................................................................................................................................... 49
Figure 7-16: Mounting Base................................................................................................................................. 53
Figure 7-17: Air Purge Collar ............................................................................................................................... 54
Figure 7-18: Water Cooling Enclosure................................................................................................................. 56
Figure 7-19: Protective Enclosure........................................................................................................................ 58
Figure 7-20: Dimensions...................................................................................................................................... 59
Figure 7-21: Outdoor Enclosure........................................................................................................................... 64
Figure 7-22: Dimensions...................................................................................................................................... 65
Figure 7-23: Swivel Bracket................................................................................................................................. 69
Figure 7-24: Junction Box.................................................................................................................................... 70
Figure 7-25: Protective Window........................................................................................................................... 71
Figure 9-1: Field of View Calculator for the Camera ............................................................................................ 74
www. .com [e-mail]1.800.561.8187

Compliance Statement
The device complies with the requirements of the European Directives:
EC –Directive 2014/30/EU –EMC
EC –Directive 2011/65/EU –RoHS II
EN 61326-1: 2013 Electrical measurement, control and laboratory devices -
Electromagnetic susceptibility (EMC)
EN 50581: 2012 Technical documentation for the evaluation of electrical products with respect to
restriction of hazardous substances (RoHS)
Electromagnetic Compatibility Applies to use in Korea only. Class A Equipment
(Industrial Broadcasting & Communication Equipment)
This product meets requirements for industrial (Class A) electromagnetic wave
equipment and the seller or user should take notice of it. This equipment is intended
for use in business environments and is not to be used in homes.
www. .com [e-mail]1.800.561.8187

Safety Information
This document contains important information, which should be kept at all times with the instrument during its
operational life. Other users of this instrument should be given these instructions with the instrument. Eventual
updates to this information must be added to the original document. The instrument can only be operated by trained
personnel in accordance with these instructions and local safety regulations.
Acceptable Operation
This instrument is intended only for the measurement of temperature. The instrument is appropriate for continuous
use. The instrument operates reliably in demanding conditions, such as in high environmental temperatures, as
long as the documented technical specifications for all instrument components are adhered to. Compliance with
the operating instructions is necessary to ensure the expected results.
Unacceptable Operation
The instrument should not be used for medical diagnosis.
Replacement Parts and Accessories
Use only original parts and accessories approved by themanufacturer. The use of other products can compromise
the operation safety and functionality of the instrument.
www. .com [e-mail]1.800.561.8187

Safety Symbol
Description
Read all safety information before in the handbook
Hazardous voltage. Risk of electrical shock.
Warning. Risk of danger. Important information. See manual.
Earth (ground) terminal
Protective conductor terminal
Switch or relay contact
DC power supply
Conforms to European Union directive.
Disposal of old instruments should be handled according to professional and
environmental regulations as electronic waste.
International Ingress Protection Marking
China RoHS
IP67
www. .com [e-mail]1.800.561.8187