Fluke TiS10 Original instructions

TiS10, TiS20
TiS40, TiS45
TiS50, TiS55
TiS60, TiS65
Performance Series
Thermal Imagers
Safety Information
Go to www.fluke.com to register your product and find more
information.
A Warning identifies conditions and procedures that are dangerous to
the user.
 Warning
To prevent eye damage and personal injury:
•Do not look into the laser. Do not point the laser
directly at persons or animals or indirectly off
reflective surfaces.
•Do not open the Product. The laser beam is
dangerous to eyes. Have the Product repaired only
through an approved technical site.
Additional laser warning information is on the inside of the Product
lens cover.
hwj010.eps
PN 4633357 July 2015
©2015 Fluke Corporation. All rights reserved.
Specifications are subject to change without notification.
All product names are trademarks of their respective companies.

Warning
To prevent personal injury:
•Read all safety information before you use the
Product.
•Carefully read all instructions.
•Use the Product only as specified, or the protection
supplied by the Product can be compromised.
•Replace the batteries when the low battery indicator
shows to prevent incorrect measurements.
•Do not use the Product if it operates incorrectly.
•Do not use the Product if it is damaged.
•See emissivity information for actual temperatures.
Reflective objects result in lower than actual
temperature measurements. These objects pose a
burn hazard.
•Do not use the Product around explosive gas, vapor,
or in damp or wet environments.
•Do not put battery cells and battery packs near heat
or fire. Do not put in sunlight.
•Do not disassemble or crush battery cells and
battery packs.
•Remove batteries to prevent battery leakage and
damage to the Product if it is not used for an
extended period.
•Connect the battery charger to the mains power
outlet before the charger.
•Use only Fluke approved power adapters to charge
the battery.
•Keep cells and battery packs clean and dry. Clean
dirty connectors with a dry, clean cloth.

Symbols
Symbol Description

Risk of Danger. Important information. See manual.
WARNING. LASER RADIATION. Risk of eye damage.
,Battery status. Battery charging when animated.
AConnected to ac power. Battery removed.
OOn/Off Symbol

Conforms to European Union directives.
Conforms to relevant Australian EMC standards.

Conforms to relevant South Korean EMC standards.
Certified by CSA Group to North American safety
standards.
Japan Quality Association
This Product contains a lithium-ion battery. Do not mix with
the solid waste stream. Spent batteries should be disposed
of by a qualified recycler or hazardous materials handler
per local regulations. Contact your authorized Fluke
Service Center for recycling information.

This product complies with the WEEE Directive marking
requirements. The affixed label indicates that you must not
discard this electrical/electronic product in domestic
household waste. Product Category: With reference to the
equipment types in the WEEE Directive Annex I, this
product is classed as category 9 "Monitoring and Control
Instrumentation" product. Do not dispose of this product as
unsorted municipal waste.
Safety Specifications
Operating temperature ...................-10 °C to +50 °C
Storage temperature.......................-20 °C to +50 °C
Battery charging temperature........0 °C to 40 °C
Altitude
Operating ..................................2,000 m
Storage .....................................12,000 m

Electromagnetic Compatibility (EMC)
International.................................. IEC 61326-1: Basic
Electromagnetic
Environment
CISPR 11: Group 1, Class A
Group 1: Equipment has intentionally generated and/or uses
conductively-coupled radio frequency energy that is
necessary for the internal function of the equipment itself.
Class A: Equipment is suitable for use in all establishments
other than domestic and those directly connected to a low-
voltage power supply network that supplies buildings used
for domestic purposes. There may be potential difficulties in
ensuring electromagnetic compatibility in other environments
due to conducted and radiated disturbances.
Emissions that exceed the levels required by CISPR 11 can
occur when the equipment is connected to a test object.
Korea (KCC)................................. Class A Equipment
(Industrial Broadcasting &
Communication Equipment)
Class A: Equipment meets requirements for industrial
electromagnetic wave equipment and the seller or user
should take notice of it. This equipment is intended for use in
business environments and not to be used in homes.
USA (FCC) ................................... 47 CFR 15 subpart B. This
product is considered an
exempt device per clause
15.103.
LIMITED WARRANTY AND LIMITATION OF LIABILITY
This Fluke product will be free from defects in material and
workmanship for two years from the date of purchase. This warranty
does not cover fuses, disposable batteries, or damage from accident,
neglect, misuse, alteration, contamination, or abnormal conditions of
operation or handling. Resellers are not authorized to extend any
other warranty on Fluke’s behalf. To obtain service during the
warranty period, contact your nearest Fluke authorized service center
to obtain return authorization information, then send the product to
that Service Center with a description of the problem.
THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER
WARRANTIES, SUCH AS FITNESS FOR A PARTICULAR
PURPOSE, ARE EXPRESSED OR IMPLIED. FLUKE IS NOT LIABLE
FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY
CAUSE OR THEORY. Since some states or countries do not allow the
exclusion or limitationof an implied warranty or of incidental or
consequential damages, this limitation of liability may notapplyto you.
Fluke Corporation
P.O. Box 9090
Everett, WA 98206-9090
U.S.A.
Fluke Europe B.V.
P.O. Box 1186
5602 BD Eindhoven
The Netherlands
11/99