Flycam FLCM-FLN-TC User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
Flowline Camera Gimbal Tilt Control Kit (FLCM-FLN-TC)
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Assembly Manual
1 x L-Type Allen key
(Size: 3 x 16”)
Flowline Camera Gimbal Tilt

2
NOTE: Flycam Gimbal Tilt Control Kit is
exclusively designed for all Flycam Flow-
line Series to oer steady gimbal lt.
• Remove the bolt of the Flycam Gimbal
Tilt Control Kit using a T-type Allen Key
(3x16”)(Not Included).
• Remove the rst Spindle of the Flycam
Gimbal Tilt Control Kit, as shown in
the image.
• To remove the remaining bolts, follow
the same process.
Flowline Camera Gimbal Tilt Control Kit Setup
• Now, remove the second Spindle.

3
• Remove the aached Camera
Hook of the Flycam Flowline Arm
(Not Included) by loosening its screws
using the Allen key.
• Now, remove the Camera Hook from
the cup and take out the Cord from the
cup.
• Remove the Cord Lock from the Cord.
• Remove the cap of the Flycam Gimbal
Tilt Kit.
NOTE: The Crossbar is axed to the top
of your Flowline Rig with the help of the
Quick-Release Camera Hook.
Flycam Flowline Arm Setup
• Properly insert the Cord into the
Flycam Gimbal Tilt Kit.

4
• Now, insert the Cord into the Camera
Hook.
• Mount the cap on the Camera Hook
and properly secure it.
• Aer inserng the Cord into the
Camera Hook, rotate and properly
ghten it.
• Aach both the Spindles of the
Flycam Gimbal Tilt Kit with the Star
Ring (Not Included).
• Pull and remove the Camera Hook of
the Flycam Gimbal Tilt Kit.

5
• Repeat the same process to secure the
second Spindle.
• Aer aaching the Spindles, re-insert
bolts and ghten the rst Spindle using
the T-type Allen Key (3x16”).
• The height of the Flycam Gimbal Tilt Kit
is properly adjusted.
NOTE: The kit includes a Crossbar, Ropes,
Spindles, and a Quick-Release Camera
Hook, delivering steady lng gimbal
shots
• You can loosen or ghten the rope of
the Flycam Gimbal Tilt to adjust its
height.
• Aach the cap to the Camera Hook, as
shown in the image.

6
• Slide the RS-Ronin (Not Included) onto
the Star Ring and secure it in posion
by ghtening its locking knob.
NOTE: The Crossbar enables supreme
balance and lets you lt your enre
Flowline rig down to 90° on either side,
allowing dynamic shots.
RS-Ronin Setup
Dierent and Creave Tilng angles for Gimbals

7
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our
company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.
YOUR FLYCAM FLOWLINE CAMERA GIMBAL TILT CONTROL KIT
ALL DRESSED UP AND READY TO GO!