Flycam FLCM-FLN-CH User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Assem bly Manual
Flycam Quick Release Camera Hook
with 4 x Ball Studs (1/4”-20) & (3/8”-16)
Quick Release Camera Hook for Flycam Flowline
Body Support Rigs (FLCM-FLN-CH)

2
• Similarly, remove the second screw.
• Now, remove the Hook from the Flowline
Support Arm.
• As shown in the image, take the Cord
bundle out from the Cup and pull the Cord
unl a Cord lock comes out.
• Separate the Cord and the Cord lock.
• Keep the lock aside to re-aach it later.
• Insert the Ball Stud in the quick-release
Camera Hook, as shown in the image.
NOTE: Quick-release catch is secured to the
Ball Stud.
Camera Hook Setup
• Loosen the screw of the Camera Hook
aached to the Flowline Support Arm
(Not Included) using an Allen key.
• Similarly, separate the Cord from the Cup to
mount it back later.

3
• Properly aach the Cord to the Quick
release Camera.
• Aer aaching the Cord, properly e it to
the Cap.
NOTE: The quick-release head is aached to
the Rig's Suspension Cable.
• Insert the Ball stud in the Camera by
properly matching its thread.
NOTE: The Hook has a quick-release head and
four-ball studs that can be mounted on
almost any Camera, Cage, or Rig with 1/4"-20
or 3/8"-16 threads on top.
NOTE: It has a thumbscrew that ensures a
solid connecon for your Rig.
• The standard Camera hook by Flycam is
universal and can be used on any Camera.
• Remove the Cap from the Quick-release
Camera Hook.
• Insert the Cord into the Cap.
• Aer inserng the Ball stud, aach the
quick-release Camera hook to the Ball Stud.
NOTE: Solid and secure aachment via
thumbscrew.

4
YOUR PROAIM QUICK RELEASE CAMERA HOOK FOR FLYCAM
FLOWLINE BODY SUPPORT RIGS
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.