Flycam Zest Pro User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
Zest Pro Electronic Stabilizer | V-Mount (ST-ZEST-PRO-02)
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Assembly Manua l
Telescopic centre post with Inbuilt
Cables
Weight Rods
2 x 300mm Male Rods
2 x 150 Female Rods
Monitor Mount
20pcs Weight Plates
V-Mount Baery

2
2 x HDMI male to male
cable
DC Power cable RC male to BNC
male cable RC to RC male cable
2 x RC Female to BNC male
Connector 3/16mm, 4mm, 3mm, 2.5mm Allen Keys Ratchet Knob
Storage Bag

3
FUNCTIONS
1/4"- 20 3/8"-16
Scaling
Quick & Precise
Camera Posion
Adjustments
Fine Tuning Knob
Front-to-Back Camera Adjustment
Fine Tuning Knob
Reversed to Forward Camera adjustment & Push from
Outer Side to free Dovetail Quick Release Plate from
Camera Plaorm
Dovetail Quick Release Knob
Secure Dovetail Quick Release
Plate to Camera Plaorm
Camera Plaorm with Dovetail
Quick-Release
For Quick Camera Mounng/
Dismounng

4
Scaling
Bubble leveler
Glow-in-the-dark bubble level
DC Connector
Power output
HDMI Connector
RC Video Connector
Laser Engraved Guide Scale
Markings
Quick & Precise Vercal Posion
Adjustment
Posive Twist Lock
Easy & Secure Low Mode
Operaon
Posion-Adjustable
Knurled 3-Axis Gimbal
3-Axis Smooth Rotaonal
Operaon
Gimbal Handle
Connects to Vibraon Isolator
Arm

5
 Loosen bolts to adjust the height of Zest
as per your requirement. Securely ghten
the bolts with the help of Allen key.
NOTE: Do not over ghten the bolts.
ZEST PRO SETUP
 Loosen the Bolts & knob to rotate
Monitor Mount plate. The unique pivot
mechanism of Monitor mount enable
360° Rotaon and angle adjustment for
more convenience.
Adjustment of Monitor Mount
 Aach the monitor mount to the
stabilizer rods and secure it properly
using the knob.
 This is adjustable by loosening the
Monitor Mount Knob with one hand
while supporng and adjusng the
monitor with the other.
 Add your choice of monitor by lining up
the registraon pins and aaching it to
the monitor mount via the capve ¼-20
screw.

6
 Insert the weight rods onto the stabilizer
& ghten the knobs accurately.
 Now aach provided Weight Plates at
both sides on Stabilizer rods and ghten
the knobs to secure them appropriately.
 Aach V-Mount Baery Plate onto
Stabilizer Rods and ghten the provided
knob to secure it properly.
Assembly of Weight Bar
Assembly of Head Plate
 Remove the bolt aached to the camera
plate with the help of a 3/16 mm Allen
key.
 Aer removing the bolt, you can use a
ratchet knob in its place.
Once the ratchet knob is aached,
ghten it correctly.

7
 The Camera plaorm knob helps in the
movement of the plate.
 As shown in the image, you can use the
knob to reverse and forward the plate as
per your choice.
 Pull the knob on the camera plaorm
and remove the quick release plate.
 Loosen the black knob on the camera
plaorm to move it right-le.
 The images show the camera plaorm
movement. You can move the plaorm
right-le as per your requirement.
 Aach the quick release camera plate to
the camera, and secure it using an Allen
Key.

8
 Pull the knob on the camera plate, slide
in the camera, push the knob where the
camera is balanced correctly.
 Aer balancing the camera properly,
push the knob and use the ratchet knob
to secure it properly.
 HDMI male cable– It is used when we
want to take video from hdmi connector
of camera .one will connect to camera
and other will to camera plate of zest. If
we need two hdmi output for display
then you can use it with power hdmi
splier cabinet .
 RC male to bnc male wire– It is used to
connect the camera of bnc funcon and
other side will connect to camera plate
of zest.
 DC power cable :- it is used with power hdmi splier. here we have many voltage output and we can
use voltage output for display according to your requirements. Voltages are specied in power splier.
 RC to RC male cable :- it is used when we have RC connector in camera .you can use this video cable
according to your requirements.
Cable Assembly

9
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of
me, we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor
does it cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to
inspecon and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling
in transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our
company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.
YOUR FLYCAM ZEST PRO ELECTRONIC VIDEO CAMERA STABILIZER
ALL DRESSED UP AND READY TO GO!