Follett Horizon H C700ABT User manual

Order parts online
www.follettice.com
00978767R01
801 Church Lane • Easton, PA 18040, USA
Toll free [phone] • [phone]
www.follettice.com
Horizon™Ice Machine Installation Instructions
to Ice Storage Bin Top-mount Applications
H_C700ABT, H_C700WBT,
H_D700ABT, H_D700WBT,
H_E700ABT, H_E700WBT,
(See model number congurator on page 2 for details.)
self-contained

2self-contained BIN • TOP-MOUNT
CAUTION!
• This appliance should be permanently connected by a qualied person in accordance with application codes.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualied
persons in order to avoid a hazard.
• Connect to potable water supply only.
• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory,
or mental capabilities, or lack of experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards involved. Children should be
supervised to ensure that they do not play with the appliance.
• This appliance is intended to be used for household and similar applications such as staff kitchen areas
in shops, offices and other working environments; farm houses and by clients in hotels, motels and
other residential type environments; bed and breakfast type environments; catering and similar non-retail
applications.
• WARNING! To avoid a hazard due to instability of the appliance, it must be xed in accordance with the
instructions.
A V SC 700HC
ConfigurationApplication
S RIDE®
(RIDE remote ice
delivery equipment)
T Top-mount
400 up to
454 lbs
(206kg)
700 up to
750 lbs
(340kg)
1000 up to
1036 lbs
(471kg)
1400 up to
1450 lbs
(658kg)
1650 up to
1580 lbs
(717kg)
V Vision™
H Harmony™
B Ice storage
bin
J Drop-in
M Ice Manager™
diverter valve
system
CondenserSeriesVoltageMachine
C 208-230/60/1 (icemaking head)
Self-contained only.
D 115/60/1 (icemaking head)
Self-contained and remote.
If remote unit, high side is
208-230/60/1.
E 230/50/1 (icemaking head)
Self-contained only.
F 115/60/1 (icemaking head)
Remote only. High side is
208-230/60/3.
MC Maestro™
Chewblet
(400 Series)
HC Horizon
Chewblet
(1000, 1400,
1650 Series)
HM Horizon
Micro
Chewblet
A Air-cooled, self-contained
W Water-cooled,
self-contained
R Air-cooled, remote
condensing unit
N Air-cooled, no condensing
unit for
connection to parallel rack
system
Chewblet®Ice Machine Model Number Configurations

BIN • TOP-MOUNT self-contained 3
Read and complete the following 8 installation steps
Front cover
8
Internal connection
7
Ice transport tube
5
External connection
6
Louvered docking assembly
4
Dispenser preparation
3
Site preparation
2
Unpack
1

4self-contained BIN • TOP-MOUNT
Carefully unpack and inspect the contents of your Follett ice machine. 1
Unpack
7/16"
7/16"



Unpack ice machine
1. 1

BIN • TOP-MOUNT self-contained 5
Prepare the installation site. 2



1/4"
1'
4
5-15
NEMA
H_C700A/W
H_D700A/W
6-15
NEMA
Site preparation
2.1
Provide drainage, potable water supply and electrical power to within 6 feet
(2m) of ice machine in accordance with local and national codes. Outdoor
installation is not recommended and will void warranty.
115V ±5%
208V -5% to 230V +5%
Electrical ➊
• H_C700(A/W)BT 208-230/60/1-15 amp breaker • H_D700(A/W)BT 115/60/1-15 amp breaker
(H_C700A/W Requires a 15 amp dedicated circuit) (H_D700A/W Requires a 15 amp dedicated circuit)
• H_E700(A/W)BT 230/50/1-15 amp‡breaker
(H_E700A/W Requires 15 amp circuit 1.50 mm2wire)
‡ Plug must be provided by end user & must conform to standard EN 60 335-2-24 of the end destination.
Potable water supply ➋
• 10-70 psi (69-483kpa)
• 45 to 90 F (7 to 32 C)
• Water supply must be treated by a scale-inhibiting lter (item# 00130286)
Condenser water supply for water-cooled systems ➌
• 10 psi min.; 150 psi max. (69kpa min.; 1034kpa max.)
• 20 to 90 F (-7 to 32 C)
• 1.5 gallons per minute (5.68 liters per minute)
Drain ➍
• The drain line from the ice machine must be vented and have at least 1/4” per foot (6,4mm/0,3m)
pitch
Installation site requirements
2.1

6self-contained BIN • TOP-MOUNT
➋
➊
➌
➊
• Apply gaskets
➊
• Install shuttle actuator ➋ through
dispenser top and secure with locking nut
➌
Bin top preparation
3.2
Prepare the bin. 3
Bin preparation
• Remove protective tape from
gaskets
Bin top preparation
3.1

BIN • TOP-MOUNT self-contained 7
Install the louvered docking assembly.
Louvered docking assembly 4
sealant
• Mount louvered docking assembly using
two screws provided.
• Seal perimeter of docking station to
mounting surface.
Louvered docking assembly
4.1
WARNING!
• Docking station must be secured in accordance with these instructions to ensure ice machine
stability.
• Ventilation openings in the louvered docking station should be clear of obstruction. Failure to do so
could result in damage to equipment.

8self-contained BIN • TOP-MOUNT



Hot Water
160 F (71 C)
Ice transport tube
Install the ice transport tube. 5
• Cut transport tube to 26” (66 cm) length
• Install supplied ice transport tube insulation
• Heat end of transport tube in cup of 160 F (71 C) hot water to soften and spread with pliers ➊
before making connection to ease assembly
• Connect ice transport tube to coupling on louvered docking station ➋
• Connect ice transport tube to shuttle actuator ➌
Ice transport tube installation.
5.1

BIN • TOP-MOUNT self-contained 9
Connect utilities to louvered docking assembly. 6
External connections
➊
➌
➋➍➋
➊
• Remove access panel if necessary
• Install drain line ➊.
The rigid drain line from the ice machine
must be vented and have at least 1/4” per
foot (6,4mm/0,3m) pitch.
• Install ice machine potable water
supply ➋
(Water supply must be treated by a scale-
inhibiting lter (item# 00130286)
• Replace access panel
• Remove access panel if necessary
• Install drain line ➊.
The rigid drain line from the ice machine
must be vented and have at least 1/4” per
foot (6,4mm/0,3m) pitch.
• Connect cooling water supply ➋and
return ➌
• Install ice machine potable water
supply ➍
(Water supply must be treated by a scale-
inhibiting lter (item# 00130286)
• Replace access panel
6.1 6.2
Air-cooled icemakers only Water-cooled icemakers only

10 self-contained BIN • TOP-MOUNT
Connect ice machine to louvered docking assembly. 7
Internal connections
• Remove twist tie
• Carefully pass plug thru opening and plug
into wall outlet
Power cord
7. 3
➊
➋
• Slide ice machine into louvered docking
assembly ➊
• Insert ice transport tube all the way into
coupling and tighten nut rmly ➋
Ice transport tube
7. 1

• Insert potable water line into valve ➊
Potable water and drain lines
7. 2
Air-cooled ice machines – follow steps 7.1 through 7.4.
• Position plate into opening and secure
with supplied screw.
Power cord
7. 4
CAUTION!
• Plug must be accessible after nal installation.

BIN • TOP-MOUNT self-contained 11

• Insert potable water line into valve ➊
Potable water and drain lines
7. 7
Out
In
• Install ice machine cooling water lines to
louvered docking assembly
Cooling lines
7. 5
➊
➋
• Slide ice machine into louvered docking
assembly ➊
• Insert ice transport tube into coupling and
tighten nut rmly ➋
Ice transport tube
7. 6
➋
➊
• Connect cooling water lines to ice
machine ➊
• Water valve is set at the factory. DO NOT
remove seal or adjust water valve ➋
Cooling lines and power
7. 8
Water-cooled ice machines – follow steps 7.5 through 7.10.

12 self-contained BIN • TOP-MOUNT
• Remove twist tie
• Carefully pass plug thru opening and plug
into wall outlet
Power cord
7. 9
• Position plate into opening and secure
with supplied screw
Power cord
7. 1 0
WARNING!
• This appliance should be permanently connected by a qualied person in accordance with application codes.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualied persons in
order to avoid a hazard.

BIN • TOP-MOUNT self-contained 13

14 self-contained BIN • TOP-MOUNT
Front cover
Install front cover to ice machine. 8


• Slide ice machine cover over machine,
ensuring that tabs on back of cover
slip under louvers on back of louvered
docking assembly ➊,then tighten two
screws through cover
• Place louvered front cover on machine ➋
Install front cover
8.1
NOTICE
§Ice machine MUST be sanitized prior to operation!
§Consult Operation and Service Manual provided with ice machine for sanitizing instructions.
§To prevent circuit breaker overload, wait 15 minutes before restarting this unit. This allows the compressor to
equalize and the evaporator to thaw.

BIN • TOP-MOUNT self-contained 15

00978767R01
© Follett Corporation 8/13
801 Church Lane • Easton, PA 18040, USA
Toll free [phone] • [phone]
www.follettice.com
Horizon is a trademark of Follett Corporation.
Follett, RIDE and Chewblet are registered trademarks of Follett Corporation, registered in the US.