Forest garden FGLWLGSTHD User manual

REMINDER
Always pre-drill before
screwing.
IMPORTANT
Assembly requires 2+
adults.
Tape Measure Drill & 2-3mm
Drill Bits
Pozidrive
Screwdriver
Ladder
70MM
SCREWS
Forest Garden, Oak Drive, Hartlebury Trading Estate, Hartlebury, Worcestershire, DY10 4JB
EU Authorised Representative: Authorised Representative Service, 77 Camden Street Lower Dublin, D02 XE80, Ireland
Missing something or need more information?
Call our aftersales team on
0333 321 3142
Visit our website for spare instructions and
more information
www.forestgarden.co.uk
LARGE/MEDIUM WALL APEX LOG STORE
INSTRUCTIONS
ISSUE: 0222
We recommend using the following
tools (not supplied):
FIXING PACK CONTAINS:
FIXING PACK CODE: LWLGSTFP
PLEASE KEEP PLASTIC BAGS AND SMALL PARTS
AWAY FROM CHILDREN
4 x 50mm Screws
QTY: 22
3.5 x 30mm Screws
QTY: 14
Position each Beam on top of the Side Panels. Ensure
they are centrally positioned on the posts as shown
above. Attach the Beams to the Side Panels.
Position the Side Panels in your desired location. Your
log store must be built on a solid and level base.
1
CHECK AND TIGHTEN ALL THE FIXINGS APPLIED TO
THIS PRODUCT ON A REGULAR BASIS.
SIDE PANEL 2
BEAM
5 x 90mm Screws
QTY: 4
5 x 70mm Screws
QTY: 12
Making British gardens great

420mm
815mm
110mm 110mm
110mm
121.3mm 121.3mm
121.3mm
50MM
SCREWS
50MM
SCREWS
90MM
SCREWS
70MM
SCREWS 70MM SCREWS
3
4
Position and secure the other Floor Battens to the
Side Panels. Space each Floor Batten out evenly.
Use the measurement provided which is relevant to your
log store. (Large log store (L)) (Medium log store (M)).
Position and secure each Brace to the Side Panels and
Beams. Ensure the braces are postioned centrally on the
post and Beam.
5
BRACE
Position and secure 2 x Floor Battens to the Side
Panels. Ensure the Floor Batten is ush to the post and
bottom batten on the Side Panels as shown above.
FLOOR BATTEN
Place the Roof Panels onto the Apex Battens and
Side Panels. Ensure the Roof Panels meet in the centre
before securing.
Position and secure an Apex Batten to each Beam.
Ensure to position them on the Beams centrally before
securing. Use the measurement provided which is
relevant to your log store.
Secure the Roof Panels to the Beams and Apex
Battens once, the Roof Panels have been positioned.
Use 4 x screws per Roof Panel.
6INSIDE
RIGHT ROOF PANEL
APEX BATTEN
LEFT ROOF PANEL
L
M
L
M

160mm 35mm
30MM
SCREWS
50MM
SCREWS
50MM
SCREWS 30MM
SCREWS
7
Position and secure the Side Fascias. Ensure the fascia
is ush to the Roof Panel. Screw into the end of the roof
battens to x in place.
Position and secure the Fascias. Ensure the fascia is
ush to the Roof Panels. Screw into the battens behind
to x in place.
Position the Roof Cap on to the centre of the roof
and x in place. Ensure to screw into the Apex Batten
beneath, using the measurements provided.
Position and secure the Finial to the centre of the front
Fascias.
8
SIDE FASCIA
910
FASCIA
ROOF CAP
HEALTH & SAFETY
THE ROOF OF THIS LOG STORE IS NOT A LOAD BEARING STRUCTURE
We strongly recommend that PPE (Personal Protective Equipment) is used throughout your build to ensure you are
protected from any potential health and safety risks. Do not exempt yourself from wearing PPE.
Please note that the above assembly steps show the large wall apex log store. The assembly and xings are the exact
same for the medium wall apex log store. Any additional measurements have been included which are relevant to your
chosen log store (L & M)
FINIAL

TREATED TIMBER CONTAINING A BIOCIDAL PRODUCT
CONTROL OF WOOD DESTROYING ORGANISMS
Active Ingredients - Propiconazole, Tebuconazole, IPBC, Permethrine, Benzyl-C12-16-Alkyldimethyl Chlorides. (Dip Treated)
Basic Copper Carbonate, DDA Carbonate, DDA Chloride. (Pressure Treated)
Wear gloves when handling. Avoid inhalation of sawdust. Do not use in contact with drinking water or food. Do not use for animal
bedding or in sh ponds. Dispose of treated wood responsibly.
Use the labelled components to help identify the part code and description.
CHECK YOU HAVE ALL YOUR PARTS PRIOR TO ASSEMBLY.
(The parts do not have codes on them. They are listed below should you need to order one.)
Timber is a natural material of which will shrink and swell as a result of varying moisture content.
Assembly of damaged parts may be deemed to be acceptance and this may affect the remedies you are entitled to. If the product is not constructed
in accordance with the instructions, or is altered in anyway (e.g. painted), the manufacturer cannot be held liable for any resulting damage.
The components provided may be heavy. Please lift with caution and with a minimum of 2 people.
G H
Label Part Code Description No. Label Part Code Description No.
ALWLGSTSIDE Side Panel 670x1800mm 2 B MWLGSTSIDE Side Panel 670x1315mm 2
C70351700HLPPT Beam 70x35x1700mm 2 D 60350900HLPPT Beam 60x35x900mm 2
E50251595PPT Floor Battens 50x25x1595mm 4 F 50250820PPT Floor Battens 50x25x820mm 4
G70350395AII45PPT Brace 70x35x395mm 4 H 60200300AII45PPT Brace 60x20x300mm 4
I70350295AII18PPT Apex Batten 70x35x295mm 2 J 60350295AII30PPT Apex Batten 60x35x295mm 2
KLWLGSTRHROOF Right Hand Roof Panel 800x1090mm 1 M MWLGSTRHROOF Right Hand Roof Panel 782x800mm 1
LLWLGSTLHROOF Left Hand Roof Panel 800x1090mm 1 N MWLGSTLHROOF Left Hand Roof Panel 782x800mm 1
O60200800PPT Side Fascia 60x20x800mm 2 O 60200800PPT Side Fascia 60x20x800mm 2
P60201115AII72PPT Fascia 60x20x1115mm 4 Q 60200815AII60PPT Fascia 60x20x815mm 4
R50120800RCPPT Roof Cap 50x12x800mm 1 R 50120800RCPPT Roof Cap 50x12x800mm 1
SFIN110150185PPT Finial 110x15x185mm 1 S FIN110150185PPT Finial 110x15x185mm 1
Large Wall Apex Log Store (LWLGST)
Medium Wall Apex Log Store (MWLGST)
A B C D E F I J
K L M N O P Q R S