Forest garden OPATSFP User manual

Pre-drill
for each screw
used.
This article contains biocidal products to give protection against
wood destroying insects & wood rotting fungi. Contents may vary.
May contain : Basic copper carbonate (Copper (II) carbonate –
Copper (II) hydroxide (1:1), Cupric oxide, Copper hydroxide
carbonate, oxyethyl, ammoniumpropionate, Copper HDO,
Propiconazole, Tebuconazole, Boric acid, Benzalkonium chloride.
Wear gloves when handling freshly treated wood. Avoid breathing
dust when cutting treated or untreated wood. Dispose of off-cuts
responsibly – do not burn.
Drill/Pozi Drive
Screwdriver
Tape Measure
Tools Required
Not Supplied
Spirit Level
Hammer
Sharp Knife
Fixing Pack Code = OPATSFP
a
b
c
aad
ae
f
g
50mm Screw Qty 16 25mm Screw Qty 72
30mm Nail Qty 43
Hasp And Staple Qty 1
Flush Hinge Qty 4
Turn Button Qty 2
h
30mm Screw Qty 2
Felt Tacks Qty 30
Item Part Code Part Description Quantity
1 OPTSBP OLAP PTR TALL STORE BACK PANEL 1
2 OPTSSP OLAP PTR TALL STORE SIDE PANEL 2
3 TSFRP TALL STORE FRONT PANEL 1
4 PTSDR PTR TALL STORE DOOR 2
5 28280953PT BATTEN 28x28x953mm PTREAT 2
6 121120481PPT BOARD 121x12x481mm PAR PTREAT 2
7 9534478 OSB 953x447x8mm 1
8 37281529PT BATTEN 37x28x1529mm PTREAT 1
9 44121710PPT STRIP 44x12x1710mm PTREAT 2
10 121120476PAII80PT BOARD 121x12x476mm PAR ANGLED 4
11 5354818 OSB 535x481x8mm 2
12 28280482PT BATTEN 28x28x482mm PTREAT 2
13 45280296PT BATTEN 45x28x296mm PTREAT 4
14 121120580PAII80PT BOARD 121x12x580mm PAR ANGLED 4
15 28280070PT BATTEN 28x28x70mm PTREAT 4
16 44161710PT STRIP 44x16x1710mm PTREAT 2
17 85069 BLACK FELT 1.3 x 1 METRE 1
Large Apex Tall Garden Store
OPATSFP
This fixing pack covers multiple products. Please make sure you quote from the relevant parts list in the event you need to order missing or damaged parts.
Important:
Assembly of this product requires a
minimum of two adults.
OPATGS (Pressure Treated Overlap ) PARTS LIST Attention:
nFor Domestic Use Only.
nMust be built on a andsolid level
base.
nRegularly check that all fixing are
tight and secure.
nRegularly check the felt for damage.
Item Part Code Part Description Quantity
1 SPTSBP SLAP PTR TALL STORE BACK PANEL 1
2 SPTSSP SLAP PTR TALL STORE SIDE PANEL 2
3 TSFRP TALL STORE FRONT PANEL 1
4 PTSDR PTR TALL STORE DOOR 2
5 28280953PT BATTEN 28x28x953mm PTREAT 2
6 121120481PPT BOARD 121x12x481mm PAR PTREAT 2
7 9534478 OSB 953x447x8mm 1
8 37281529PT BATTEN 37x28x1529mm PTREAT 1
9 44121710PPT STRIP 44x12x1710mm PTREAT 4
10 121120476PAII80PT BOARD 121x12x476mm PAR ANGLED 4
11 5354818 OSB 535x481x8mm 2
12 28280482PT BATTEN 28x28x482mm PTREAT 2
13 45280296PT BATTEN 45x28x296mm PTREAT 4
14 121120580PAII80PT BOARD 121x12x580mm PAR ANGLED 4
15 28280070PT BATTEN 28x28x70mm PTREAT 4
17 85068 GREEN FELT 1.3 x 1 METRE 1
Forest Garden Ltd. | Unit 288 | Oak Drive | Hartlebury Trading Estate | Hartlebury| Worcestershire | DY10 4JB Issue 0717
Help line: 08:30 to 17:00 Monday to Friday0333 7777 089
This product is pressure totreated
ensure longevity of all timber
components and to protect against rot.
This may leave a colour difference on
some parts that will even out as the
moisture content stabilises This will.
not need additional treatment.
nPlease keep all plastic bags and
small parts away from children.
nThe roof of this product is not a
load bearing structure.
nTimber is a natural material and
will shrink and swell as a result of
varying moisture content.
Assembly of damaged parts may be
deemed to be acceptance and this
may affect the remedies you are
entitled to.
If the product is not constructed in
accordance with the instructions, or is
altered in anyway (e.g. painted), the
manufacturer cannot be held liable for
any resulting damage.
Please check all parts prior to
assembly.
SPATGS ( Shiplap) PARTS LIST

AB
CD
PRE-DRILL PRE-DRILL PRE-DRILL
ae
The batten should be fixed so it is
tight against the horizontal battens
on the reverse of the door and offset
14mm from the top.
3
1
4
8
f
f
f
f
f
ee
e
e
2
e
Place the panels on top of the
base making sure that they are
all tight and flush before fixing
the panels together using 3 x
50mm screws for each corner.
Fix the front and back panels to
the floor using 2 x 50mm screws
for each screwing down through
the framing from inside.
f
f
f
f
f
f
f
f
f
f
5
7
8mm
10
9
16
Place the angled boards against the
front and back panels as shown to
create an apex. Fix each board in
place using 2x 25mm screws.
fd fd
16 is for the
Overlap Garden
Store only.
Fix each of the corner strips along the
edges so that they are flush and fix
each in place using 4 x nails.
f
f
f
f
Floor Assembly
Board and batten
should be flush.
Slamming Strip
28mm
Offset from
top 14mm

EF
GH
ah
Take care when
trimming the roof
felt.
17
ah
ah
d
x 6
The top of the hinge
should be in line with the
horizontal batten
Fix the smaller
piece of the hinge
to the door.
ac
ag ab
8
Place a turn button on the top
and bottom of the batten. 11
13
13
12
f
f
f
f
f
f
ff
ff
a
d
x 2
Fix the roof board to the battens as
shown using nails.
Repeat for the other roof section.
Slot the roof sections so that they line up at the apex. Fix these from the inside screwing through
the apex boards into the 296mm battens using 2 x 25mm screws for each.
Apex Boards
Place the felt over the roof so that
there is approximately a 45mm
overhang on all sides. Secure the felt
to the roof, nailing into the ba! ens
from the sides using felt tacks placed
in 150mm intervals.
Cut and fold the felt at the corners as
shown.
PRE-DRILL PRE-DRILL PRE-DRILL

IJ
K
6
15
14
d
d
d
d
d
d
d
d
d
d
Position and line up the hasp
and staple with framing on the
inside of the door.
a
d
x 7
Fix the 481mm board to two of the 70mm battens.
These should be flush on the short side and off set
10mm from the long side. Fix the battens in place
using 2 x 25mm screws for each.
Repeat with the remaining blocks and 481mm board.
110cm
50cm
183cm
95cm
Forest Garden Ltd. | Unit 288 | Oak Drive | Hartlebury Trading Estate | Hartlebury | Worcestershire | DY10 4JB Issue 0617
Make sure that the screws are
positioned so that each locates
into the batten.
PRE-DRILL PRE-DRILL PRE-DRILL