Forest garden WLSTOREFP User manual

DRILL
REQUIRED TOOLS : (NOT SUPPLIED)
Thank you for choosing this product manufactured by the UK's largest manufacturer of timber garden products. In order to gain the most benefit from it, please note the
following:
- Exercise particular care and follow instructions.
- This product is pressure treated to ensure longevity of all components and to protect against rot. This may leave a colour difference on some parts that will even out as the
moisture content stabilises. For extra protection from the elements we recommend that you treat your structure using a wood preservative treatment. Apply in accordance with
the manufacturers instructions.
- In line with your statutory rights, please check all parts prior to assembly, as assembly of damaged parts may be deemed to be acceptance and this may affect the remedies
you are entitled to. If the product is not constructed in accordance with the instructions, or is altered in anyway (eg painted), the manufacturer cannot be held liable for any
resulting damage.
- Timber is a natural material. It will shrink and swell as a result of varying moisture content.
- Please keep all plastic bags and small parts away from children in order to reduce the risk of suffocation.
- Important Note : Do not lean or stand on roof during assembly this is not load bearing.
- If there are any technical queries with the product, please contact our customer help line on 0333 321 3142 between the hours of 8.30 am and 5.00 pm Monday to Friday.
MUST PRE DRILL
Issue 0114
WLSTOREFP FIXING PACK
TAPE MEASURE
POZI DRIVE SCREWDRIVER
JE
22
842mm
1953mm
1825mm
1200mm 250mm
A
IMPORTANT, RETAIN FOR FUTURE REFERENCE :READ CAREFULLY
BATTEN 45x45x1725mm
Qty 3
(45451725PTR)
RIGHT SIDE
(WLSTORERHS)
LEFT SIDE
(WLSTORELHS)
ROOF
(LGLSROOF)
PARTS LIST
7mm Wall plug Qty 4
Fix two of the battens against the
back of the left and right sides
using a 70mm screw for each end.
Position the battens as illustrated.
4 x 70mm screws
THIS PRODUCT MUST BE SECURED TO A WALL
70mm Screw Qty 14
MUST PRE DRILL
WALL LOG STORE
1
WLSTOREFP

2
4
Issue 0111
Fix the remaining batten to the inside and to the
front of the side panels as shown using a 70mm
screw for each end.
2 x 70mm screws
Place the lid on top of the two sides.
Fix in place by screwing through the
framing of the lid into the side
panels using 2 x 70mm screws for
each side.
4 x 70mm screws
This product must be firmly
attached to the wall. Using
the wall plugs provided, fix
the log store to the wall by
screwing through the back
battens and into the wall
using 2 x 70mm screws for
each.
Make sure that you Pre-drill
4 x 70mm screws
4 x 7mm wall plug
Forest Garden Ltd. Units 291 & 296 Hartlebury Trading Estate, Hartlebury, Worcestershire, DY10 4JB
3
MUST PRE DRILL
MUST PRE DRILL
MUST PRE DRILL
THIS PRODUCT MUST BE SECURED TO A WALL
Recommended
Place a coarse of logs or bearers as a
base to keep the material off the
ground and aid in ventilation.