FOS Technologies FOS PAR 7x10W ALU User manual

FOS PAR 7x10W ALU
User Manual
This manual contains important information.
Please read before operating fixture.

1
1. SECURITY TIPS
WARNING!!! To reduce the risk of fire, electric shock, or
injury to persons, follow these important safety instructions:
non-professionals, not to disassemble the light arbitrarily and
lighting accessories inside.
rated voltage range: AC110V-120V/60Hz or AC200V-240V / 50HZ
(to be selected).
not beam irradiate the flammable materials, flammable materials
and the lamp should be maintained at least 1M over the distance.
lamps used in ambient temperature: -15 ℃-40 ℃, the highest
temperature of the surface of the lamp: 60 ℃.
to keep away from the liquid substance and humid environment.
before using the lights must ensure the good grounding, can not
install charging and remove any parts.
the installation of lamps, must be fixed screw fasteners with
additional security cable and regular inspection.
lamps consecutive working hours is not recommended more than
10 hours.
should stop using the lights in time when happens unusual
conditions during the process.
lamp parts of the rotation, external accessories and paste parts
should be regular inspected, such as the emergence of loose and
rock, should be reinforced in a timely manner to prevent the
accident.
lamps adopt strong winds to refrigerate, it is easy to accumulate the
dust, so you must clean it weekly especially the cooling air opening,
otherwise the dust will plug leading to poor light.

2
2 TECHNOLOGY REFERENCE
Power supply: AC90~240V / 50~60Hz
Power consumption:70W
Led:7pcs×10W RGBW LED 4in1 Beam angle:15° 25° 40° optional
DMX channels:4 CHS / 8 CHS
Control mode: DMX, Auto, Sound, Master-slave, strobe, dimmer
Housing Material: Iron + Aluminium Protection: IP20
Working Environment: -20~40℃
Packing size: 22.5×10×22.5Cm (1pc/CTN) 49×34×51Cm (12pcs/CTN)
N.W.：1.8Kg G.W.：24Kg(12pcs/CTN)
3 Board Instruction
MENU UP DOWN ENTER
1~Press MENU Can circulate 9 different functions. The front 2Digits
mean the function it has. (Please see the function form as follow.) And
the last 2Digits mean the function’s address, speed or parameter. Press
UP or DOWN can change the value. And press ENTER to confirm.
2~Press MENU more than 2sec. The 2Digit number will flash. Then
press UP or DOWN can change the value quickly. Then press the
ENTER to save the value you want. If you don’t want to save the value,
press MENU more than 2sec. is okay.
Operate Menu
No. Display Value Description

3
1 A001 001- 512 DMX mode,8 Channels
2 d001 001- 512 DMX mode,4 Channels
3 r255 000 - 255 Dimming red from dark to brightness
4 G255 000 - 255 Dimming green from dark to brightness
5 b255 000 - 255 Dimming blue from dark to brightness
6 u255 000 - 255 Dimming white from dark to brightness
7 F255 005 - 255 Strobe from slow to fast
8 CC15 00 - 15 Jump mode from slow to fast
9 DE15 00 - 15 Fade mode from slow to fast
10 CP15 00 - 15 Pulse mode from slow to fast
11 Soud / Sound active
4 DMX CHANNEL SHEET
4 Channels mode
CH Value Function
CH1 0-255 Dimming Red
CH2 0-255 Dimming green
CH3 0-255 Dimming blue
CH4 0-255 Dimming white
8 Channels mode
CH Value Function Description

4
CH1 0-255 Master dimming Master dimming
CH2 0-255 Dimming Red
Dimming static color
CH3 0-255 Dimming green
CH4 0-255 Dimming blue
CH5 0-255 Dimming white
CH6 0-255 Strobe mode Strobe from slow to fast
CH7
0-50 No function No function
51-100 Static color Static color selected by CH8
101-150 Jump mode
Macro mode151-200 Fade mode
201-250 Pulse mode
251-255
Sound mode
Sound mode
CH8
0-255
Speed
adjustment
Speed for Marco function
0-31
Red
CH=51~100
32-63
Green
64-95
Blue
96-127
White
128-159
Red+Green
160-191
Red+Blue
192-223
Green+Blue
224-255
Full on
5 FIXED EQUIPMENT

5
Please fasten the fixture clamp before hanging. The clamp can be
fasten by the little hole in the middle of the bracket, then tie with a
safety belt. The loading capacity of the safety belt should be 10 times
than the weight of the fixture itself.
6 CONNECTION OF DMX-512 AND
CONNETION WITH THE LIGHT EQUIPMENT
Please connect XLR-XLR control wire with every light from the output
of DMX.
XLR connection :
ATTENTION: Please do remember to connect one circle circuit plug on
the output signal of last equipment. And this circle circuit plug was
connected a 120ohm resistance between terminals 2 and 3 of the
CANON plug, connect this circle circuit plug can avoid the signal flash
phenomena of signal DMX512 during the transmission.
7 Maintenance
Problems
Check list
Trouble Shooting
The fixture do
1. If your power as same as the input
1. Make sure the voltage.

6
not work of the machine.
2. If the fuse was broken.
2. Replace the same fuse.
LED dimmed If your power us same as the input
of the machine
Make sure the voltage
input.
No DMX input
1. If the polarity is opposited in the
DMX controller.
2. If it is in DMX mode.
3. If there are 2 Master in a loop.
1. Correct the DMX
polarity.
2. Change to the DMX
mode.
3. Set one piece into
Slave mode.
Par Light Set
works
abnormality
1. Check if the serial is correct on
the Par Light display
1. Set the right serial No
on the single Par
Light
8 AFTER SERVICE
1. Our company offer technical consultation to customers for ever.
2. If the machine is wrong and need repairmen, please truthfully fill in
the related content and feedback us the problems timely, as well as
we must improve the product.
3. In addition to the lamp, also matching accessories are as follows：
accessories：Power line 1 piece Optional parts：(customers）
-------------------------------------------------------------------------------------------------------------------
Warranty Card
Name Model Production Purchase

7
Description: These must be truthfully fill, seal by the end-user and point-of-sale, or else the
warranty will not work (warranty period and terms, see the following)
warranty period：one year since purchase warranty terms：1、If fail when using the product
in normal state, you can made under the provisions of the warranty, show the warranty card
and purchase bills(copy), and enjoy free maintenance service in a specific service center or
the manufacturer.
2. The following will be the implementation of paid service:
(1)Without the effective warranty card
(2)There’s blank, alter and no point-of-sale name
(3)Fail caused by unresistance
(4)Fail caused by transportation or unloading
(5)Fail caused by not operate by manual
(6)Fail caused by disassemble without unauthorized
(7)Fail caused by using the unauthorized control system
Note:
Based on our company continue to improve the product, the statement
containing data may have changed, and will not notice the change
anymore. Company retains its right to change specifications related
when product is improved. Thanks for your understanding.
End User
Company Name:
Add:
Sale Store
Link man:
Tel: Stamp