Four-Faith 5G CPE User manual

5G CPE
User Manual
V 1.0.3
Xiamen Four-Faith Communication Technology Co., Ltd.
https://www.fourfaith.com

Revision History
Date
Version
Declaration
Author
2022-09-28
V1.0.0
Initial version
Jonas
2023-02-25
V1.0.1
1.Modify the signal light value range
2. Improve the introduction of
configuration functions
Limiao
2023-03-01
V1.0.2
Add FCC and CE declarations.
Jonas
2023-8-14
V1.0.3
English Version Update
Larry

5G CPE F-NR300 User Manual
Copyright Notice
All materials or content contained in this document are protected by copyright law. All
copyrights are owned by Xiamen Four-Faith Communication Technology Co., Ltd., except
for content attributed to other parties. Without written permission from Four-Faith, no one
may copy, distribute, reprint, link, transmit, or use any content on this document for any
commercial purpose. However, downloading or printing for non-commercial, personal use
is permitted (provided that the material is not modified, and the copyright notice or other
ownership notices are retained).
Trademark Statement
Four-Faith, 四信, , , , All are registered
trademarks of Xiamen Four-Faith Communication Technology Co., Ltd. Without prior
written permission, no one is allowed to use the Four-Faith name and Four-Faith
trademarks and symbols in any way.
Product Applicability Statement
This user manual explains how to configure the following devices:
⚫F-NR300
⚫F-NR300 V2
FCC Statement:
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications or changes to this equipment. Such modifications or changes
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or

5G CPE F-NR300 User Manual
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
‐Reorient or relocate the receiving antenna.
‐Increase the separation between the equipment and receiver.
‐Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
‐Consult the dealer or an experienced radio/TV technician for help.
Federal Communication Commission (FCC) Radiation Exposure Statement
When using the product, maintain a distance of 20cm from the body to ensure compliance
with RF exposure requirements.
CE Warning:
1. The product shall only be connected to a USB interface of version USB2.0 or higher.
2.Adapter shall be installed near the equipment and shall be easily accessible.
3. Supply by specified adapter the operating temperature of the device.can’t exceed
40℃and shouldn’t be lower than -10℃. Supply by other power supply the operating
temperature of the device.can’t exceed 60℃and shouldn’t be lower than -20℃.
4. The plug considered as disconnect device of adapter.
5. The device complies with RF specifications when the device used at 20cm from the
body.
Hereby, Xiamen Four-Faith Communication Technology Co.,Ltd declares that this product
is in compliance with essential requirements and other relevant provisions of Directive
2014/53/EU. This product is allowed to be used in all EU member states.
Contact Us:
Address:
11th Floor, A-06 Area, No.370, Chengyi Street, Jimei District, Xiamen City, Fujian Province,
China
Website:
www.fourfaith.com
Tel:
[phone] 5907277
Fax:
[phone]
Post Code:
361021
E-mail:
[email protected]

5G CPE F-NR300 User Manual
Contents
Chapter 1 Product Introduction ............................................................. 1
1.1 Product Overview......................................................................................................................................................1
1.2 Product Features .......................................................................................................................................................1
1.3 Product Appearance Overview ............................................................................................................................2
1.4 Product Specifications.............................................................................................................................................3
1.5 Indicator Light Function Description..................................................................................................................7
1.6 Button Function Description .................................................................................................................................7
1.7 Interface Definition Explanation ..........................................................................................................................8
Chapter 2 Install Internet Configuration ............................................... 9
2.1 SIM Card Internet......................................................................................................................................................9
2.2 Wired Broadband Internet Access ....................................................................................................................12
2.3 Dual-Band Bandwidth Priority Setting............................................................................................................13
Chapter 3 Configuration of Related Features ..................................... 15
3.1 WLAN Configuration..............................................................................................................................................15
3.2Mesh Network Configuration .............................................................................................................................16
3.3 Mobile Network Configuration..........................................................................................................................22
3.4 Traffic Usage Monitoring Configuration.........................................................................................................23
3.5 QOS Configuration.................................................................................................................................................27

5G CPE F-NR300 User Manual
www.fourfaith.com Copyright @ Four-Faith 2023
1
Chapter 1 Product Introduction
1.1 Product Overview
The F-NR300 is a high-performance 5G indoor CPE that supports NR (SA&NSA), TDD-LTE, and
FDD-LTE. It converts cellular network data into WiFi and wired Ethernet data, supporting one 1G
LAN port, one 2.5G LAN/WAN port, and 2.4G+5G dual-band WiFi-AP. It is suitable for home or
commercial scenarios that require fast deployment of wired broadband networks and WiFi
hotspots.
1.2 Product Features
◆Utilizes High-performance Processor
Ensures high-speed processing performance for 5G networks, ushering in a new era of
5G, and bringing you more exciting experiences at your fingertips.
◆Full Network Coverage
Compatible with SA and NSA modes. Circular unobstructed layout ensures 360-degree
signal capture without dead zones. Built-in dual-polarized 4x4 WiFi antennas, 20%
reduction in antenna volume, high isolation, enhancing transmission and reception
performance.
◆WIFI 6
High-speed WiFi 6 technology, envisioning 5G high rates; provides higher transmission
rates, lower latency, and broader coverage for simultaneous communication of multiple
devices.

5G CPE F-NR300 User Manual
www.fourfaith.com Copyright @ Four-Faith 2023
2
◆Plug and Play
The backend performs real-time detection and automatic repair of network issues,
eliminating the need for manual restarts or network reconfigurations. This simplifies
internet connectivity, requiring no manual intervention.
◆Efficient Heat Dissipation
Uses high-conductivity material for heat dissipation, streamlined design, top chimney
design, enhances heat dissipation significantly through fan convection, ensuring stable
operation even during prolonged high-speed operation.
1.3 Product Appearance Overview
Cellular Signal Indicator Light
Connected to 5G Indicator Light
Connected to 4G Indicator Light
WIFI Indicator Light
Power Indicator Light
WPS Button
Power Button
Telephone Interface (Optional)
LAN2/WAN
LAN1
Power Interface

5G CPE F-NR300 User Manual
www.fourfaith.com Copyright @ Four-Faith 2023
3
1.4 Product Specifications
F-NR300
Wireless Parameters
Frequency
Bands and
MIMO
5G NR NSA：
n1/n2/n3/n5/n7/n8/n12/n20/n25/n28/n38/n40/n41/n48*/n66/n71/n77/n78/n79
5G NR SA：
n1/n2/n3/n5/n7/n8/n12/n20/n25/n28/n38/n40/n41/n48*/n66/n71/n77/n78/n79
LTE-FDD：
B1/B2/B3/B4/B5/B7/B8/B9/B12/B13/B14/B17/B18/B19/B20/B25/B26/B28/B29/B30/B32/
B66/B71
LTE-TDD：
B34/B38/39/B40/B41/B42/B43/B48
WCDMA：
B1/B2/B3/B4/B5/B6/B8/B19
5G NR:
DL 4 ×4 MIMO: n1/n2/n3/n7/n25/n38/n40/n41/n48/n66/n77/n78/n79
UL 2 ×2 MIMO: n41
LTE:
DL 4 ×4 MIMO:
B1/B2/B3/B4/B7/B25/B30/B32/B34/B38/39/B40/B41/B42/B43/B48/B66
Note: B32/B46 only supports reception. Supported frequency bands may vary
depending on the selected regional version.
Theoretical
Maximum
Speed
5G Sub-6: Downlink Speed: 4.67 Gbps, Uplink Speed: 1.25 Gbps
LTE: Downlink Speed: 1.6 Gbps, Uplink Speed: 211 Mbps
SIM Card Slot
Reset Button

5G CPE F-NR300 User Manual
www.fourfaith.com Copyright @ Four-Faith 2023
4
Hardware Parameters
CPU
[email protected], Quad-core
FLASH
32GB (North American version)
1GB (European and Chinese versions)
LPDDR4
2GB ((North American version)
1GB (European and Chinese versions)
Power Supply
Standard
Power Supply
DC 12V/3A
Power supply
range
DC 9~24V
Operating
current
< 1.3A (12V)
Interface Parameters
LAN 2 / WAN
1 x 2.5G Ethernet port (RJ45), reusable as WAN, adaptive MDI/MDIX
LAN 1
1 x 1G Ethernet port (RJ45), adaptive MDI/MDIX
Phone
1 x RJ11 (optional)
Indicator
Lights
Signal, 5G, 4G, WIFI, Power
SIM Card
Nano-SIM，Compatible with patch eSIM
Power
Interface
Three-core DC locomotive power socket with built-in power reverse protection.
USB
Type C
Reset Button
Can restore parameter configuration to factory settings.
Physical Characteristics
Enclosure
ABS material
Dimensions
178x99x99mm
Weight
650g
Working
temperature
-20~+60ºC
Storage
Temperature
-40~+85ºC
Relative
Humidity
95% (non-condensing)
Model Information
F-NR300-NA
North American version，FLASH: 32GB, LPDDR4: 2GB
Supported Frequency Bands：
5G Sub-6: n2/5/7/12/14/25/30/41/48/66/71/77/78
LTE FDD: B2/4/5/7/12/13/14/17/25/26/29/30/66/71

5G CPE F-NR300 User Manual
www.fourfaith.com Copyright @ Four-Faith 2023
5
LTE TDD: B41/46/48
WCDMA: B2/4/5
F-NR300-EA
U
European version，FLASH: 1GB, LPDDR4: 1GB
Supported Frequency Bands：
5G Sub6: n1/3/5/7/8/20/28(a&b)/38/40/41/77/78/79
LTE FDD: B1/3/5/7/8/18/19/20/26/28(a&b)/32
LTE TDD: B38/40/41/42/43/46
WCDMA: B1/5/8
F-NR300-CN
Chinese version，FLASH: 1GB, LPDDR4: 1GB
Supported Frequency Bands：
5G Sub6: n1/3/5/7/8/20/28(a&b)/38/40/41/77/78/79
LTE FDD: B1/3/5/7/8/18/19/20/26/28(a&b)/32
LTE TDD: B38/40/41/42/43/46
WCDMA: B1/5/8
F-NR300 V2
Wireless Parameters
Frequency
Bands and
MIMO
5G NR NSA：
n1/n2/n3/n5/n7/n8/n12/n20/n25/n28/n38/n40/n41/n48*/n66/n71/n77/n78/n79
5G NR SA：
n1/n2/n3/n5/n7/n8/n12/n20/n25/n28/n38/n40/n41/n48*/n66/n71/n77/n78/n79
LTE-FDD：
B1/B2/B3/B4/B5/B7/B8/B9/B12/B13/B14/B17/B18/B19/B20/B25/B26/B28/B29/B30/
B32/B66/B71
LTE-TDD：
B34/B38/39/B40/B41/B42/B43/B48
WCDMA：
B1/B2/B3/B4/B5/B6/B8/B19
5G NR:
DL 4 ×4 MIMO: n1/n2/n3/n7/n25/n38/n40/n41/n48/n66/n77/n78/n79
UL 2 ×2 MIMO: n41
LTE:
DL 4 ×4 MIMO:
B1/B2/B3/B4/B7/B25/B30/B32/B34/B38/39/B40/B41/B42/B43/B48/B66
Note: B32/B46 only supports reception. Supported frequency bands may vary
depending on the selected regional version.
Theoretical
Maximum
Bandwidth
NR SA: Downlink Speed 1.92Gbps, Uplink Speed 630Mbps
NR ENDC: Downlink Speed 1.92Gbps (B39+N41 1.7Gbps), Uplink Speed 380Mbps
LTE: Downlink Speed 487Mbps, Uplink Speed 150Mbps
WCDMA: Downlink Speed 42Mbps, Uplink Speed 11Mbps
Hardware Parameters
CPU
MTK7621 CPU@880MHz, dual-core processor
FLASH
128MB

5G CPE F-NR300 User Manual
www.fourfaith.com Copyright @ Four-Faith 2023
6
DDR3
512MB
WIFI parameters
WIFI protocol
IEEE802.11 a/b/g/n/ac/ax
Frequency
Bands
2.4GHz+5GHz
Theoretical
Maximum
Bandwidth
2.4GHz 2x2MIMO 11ax, 0.573 Gbps
5GHz 2x2MIMO 11ax, 1.2 Gbps
Supported WiFi
Frequency
Bands
20MHz, 40MHz, 80MHz
Power Supply
Standard Power
Supply
DC 12V/3A
Power Supply
Range
DC 9~24V
Operating
Current
< 1.3A (12V)
Interface Parameters
LAN 2 / WAN
1 x 1G Ethernet Interface (RJ45), can be reused as WAN, adaptive MDI/MDIX
LAN 1
1 x 1G Ethernet Interface (RJ45), adaptive MDI/MDIX
Phone
1 x RJ11 (optional)
Indicator Lights
Signal, 5G, 4G, WIFI, Power
SIM Card
Nano-SIM，Compatible with SMD eSIM
Power Interface
Three-core DC locomotive power socket, with built-in power reverse protection.
USB
Type C
Reset Button
Parameters can be restored to factory settings.
Physical Characteristics
Enclosure
ABS material
Dimensions
178x99x99mm
Weight
638g
Working
Temperature
-20~+60ºC
Storage
Temperature
-40~+85ºC
Humidity
95% (non-condensing)
Model Information
F-NR300 V2
Cellular Data Network (5G NR), 2.4G/5G WiFi, SIM1 (or eSIM)

5G CPE F-NR300 User Manual
www.fourfaith.com Copyright @ Four-Faith 2023
7
1.5 Indicator Light Function Description
Indicator
Light
Name
Definition Explanation
Cellular Signal
Indicator Light
Cellular Signal Indicator Light
1. Blue: Indicates signal strength with RSRP > -95dBm
or RSCP > -80dBm.
2. Yellow: Indicates signal strength with RSRP ≤
-95dBm or RSCP ≤-80dBm."
5G Connection
Indicator Light
Connected to 5G Network
1. Steady on: Indicates connection to a 5G network.
2. Off: Indicates no network connection.
3. Blinking: Indicates dialing; blinking frequency is
500ms/time.
4G Connection
Indicator Light
Connected to 4G/3G Network
1. Steady on: Indicates connection to a 4G/3G
network.
2. Off: Indicates no network connection.
3. Blinking: Indicates dialing; blinking frequency is
500ms/time.
WiFi Signal
Indicator Light
WiFi Signal Indicator Light
1. Steady on: Indicates WiFi is enabled.
2. Blinking: After pressing the WPS button, blinks every
500ms, lasting for 2 minutes.
3. Off: Indicates WiFi is disabled.
Power Indicator
Light
Power Indicator Light
1. Steady on: Indicates normal power supply.
2. Off: Indicates abnormal power supply.
1.6 Button Function Description
Button
Definition Explanation
1.Pressing this button will cause the WiFi indicator light to blink every 500ms for 2
minutes. After successful connection, the WiFi light will stop blinking and remain
steadily blue.
2.User devices can establish a secure WiFi connection without manually entering
the password.
1.Default startup: Press and hold the power button for about 3 seconds to shut
down.
2.Shutdown state: Replug the power to automatically turn on.

5G CPE F-NR300 User Manual
www.fourfaith.com Copyright @ Four-Faith 2023
8
3.Shutdown state: Press and hold the power button for about 3 seconds to power
on.
Note: For F-NR300 V2, long press is for reboot and not for shutting down.
Press and hold the button for >10 seconds to restore factory settings.
1.7 Interface Definition Explanation
Interface
Name
Definition Explanation
Phone
(optional)
Telephone
Interface
Telephone RJ11 Interface
Can directly connect a telephone for making calls.
Ethernet port
1. If the interface's green indicator light is solid, it
indicates a normal connection.
2. If the interface's yellow indicator light is flashing, it
indicates data transmission or reception.
Ethernet port
1. If the interface's green indicator light is solid, it
indicates a normal connection.
2. If the interface's yellow indicator light is flashing, it
indicates data transmission or reception.
Power Interface
DC 12V/3A
Nano-SIM Card
Slot
Install Nano-SIM Card
USB
Interface
Type-C Interface
The Type-C interface is for development personnel
debugging only.

5G CPE F-NR300 User Manual
www.fourfaith.com Copyright @ Four-Faith 2023
9
Chapter 2 Install Internet
Configuration
2.1 SIM Card Internet
Step 1: Insert the SIM card as shown (chip facing down, notch inward).
Step 2: Power on the device, it will automatically boot up. The signal indicator light will stay solid,
and the 5G/4G indicator light will also stay solid, indicating successful dial-up.
Step 3: Connect the terminal device to the CPE via LAN port or WiFi to access the external
network.

5G CPE F-NR300 User Manual
www.fourfaith.com Copyright @ Four-Faith 2023
10
Step 4: If you need to make further configurations, open a web browser and manually enter:
192.168.1.1. Initial username: admin, initial password: admin.

5G CPE F-NR300 User Manual
www.fourfaith.com Copyright @ Four-Faith 2023
11
Step 5: Set the username and password for WLAN.
Step 6: Set the login password for the host device. After applying the settings, the page will
redirect to the login page. Enter the newly set username and password (Username: admin,
password is the newly set value), and click login. Configuration is complete!

5G CPE F-NR300 User Manual
www.fourfaith.com Copyright @ Four-Faith 2023
12
2.2 Wired Broadband Internet Access
Step 1: By default, the LAN2/WAN port is configured as a LAN port. It needs to be configured as
a WAN port. Connect the power supply, the device will boot up automatically. After connecting a
terminal device to the CPE, access the WEB page, configure the LAN2/WAN port as a WAN port,
then save and apply the setting.
Step 2: Connect one end of the Ethernet cable to the upstream device (ONT/broadband
modem/modem/wall-mounted Ethernet jack, etc.), and connect the other end to the CPE's
LAN2/WAN port. The status bar and homepage on the WEB page will display the Internet uplink
and downlink traffic icons, indicating that the wired broadband is functioning properly.

5G CPE F-NR300 User Manual
www.fourfaith.com Copyright @ Four-Faith 2023
13
Step 3: Connect your terminal device to the CPE's LAN port using an Ethernet cable or connect to
the CPE's WiFi network. This will allow your terminal device to access the internet.
2.3 Dual-Band Bandwidth Priority Setting.
The WEB configuration page allows you to set the priority between mobile network and Ethernet,
with mobile network being the default priority (i.e., SIM card network).

5G CPE F-NR300 User Manual
www.fourfaith.com Copyright @ Four-Faith 2023
14
Insert the SIM card into the device and connect the LAN2/WAN port to the upstream device as
the WAN port. The device will prioritize using the mobile network. When the mobile network is
unavailable, it will automatically switch to using the Ethernet connection.

5G CPE F-NR300 User Manual
www.fourfaith.com Copyright @ Four-Faith 2023
15
Chapter 3 Configuration of Related
Features
3.1 WLAN Configuration
The WLAN settings are divided into basic settings and advanced settings. Basic settings allow you
to configure the SSID, security mode, password, connection limit, broadcast hiding, and guest
WiFi. By using the guest WiFi, terminal devices can connect to the CPE and access the internet,
but they won't be able to perform any WEB configuration operations.
Advanced settings pertain to configuring channels, protocols, and bandwidth. The WPS (Wi-Fi
Protected Setup) feature allows terminal devices to quickly connect to the CPE using methods
such as PIN codes or Push Button Configuration (PBC).