Four-Faith F-TS100 User manual

Intelligent Temperature Measuring Socket
F-TS100
User Manual
V1.0.0
This manual is applicable to the following products: F-TS100
Xiamen Four-Faith Communication Technology Co., Ltd.
https://www.fourfaith.com

F-TS100 User Manual
Document Revision History
Date
Version
Note
Author
2021.7.8
V1.0.0
Initial Version
YSL

F-TS100 User Manual
Copyright Notice
All contents in the files are protected by copyright law, and all copyrights are reserved by
Xiamen Four-Faith Communication Technology Co., Ltd.
Without written permission, all commercial use of the files from Four-Faith are forbidden,
such as copy, distribute, reproduce the files, etc., but non-commercial purpose,
downloaded or printed by individual (all files shall be not revised, and the copyright and
other proprietorship notice shall be reserved) are welcome.
Trademark Notice
Four-Faith, 四信, , , are all registered trademarks
of Xiamen Four-Faith Communication Technology Co., Ltd., illegal use of the name of
Four-Faith, trademarks and other marks of Four-Faith is forbidden, unless written
permission is authorized in advance.
Contact Us
Address:
11th Floor, A-06 Area, No.370, Chengyi Street, Jimei District, Xiamen City, Fujian
Province, China
Website:
www.fourfaith.com
Tel:
[phone] 5907277
Fax:
[phone]
Post Code:
361021
E-mail:
[e-mail]

F-TS100 User Manual
Contents
Chapter 1 Product Introduction....................................................................1
1.1 Product Description.........................................................................................................1
1.2 Product Image ................................................................................................................1
1.3 Product Features.............................................................................................................1
1.4 Product Parameters ........................................................................................................2
Chapter 2 Installation Instructions...............................................................3

F-TS100 User Manual
1
Chapter 1 Production Introduction
1.1 Product Description
Intelligent temperature measuring socket F-TS100 is a socket that supports NB-IoT
remote control and temperature detection. Supporting the room temperature
detection platform independently developed by Four-Faith, it can achieve GIS
monitoring, equipment management, real-time temperature monitoring, high & low
temperature, offline, and other abnormal alarms. In addition, it can also support alarm
processing and other functions.
1.2 Product Image
1.3 Product Features
⚫Collection：
Timing temperature detection after power-on, time can be set manually.
⚫Application Scenarios:
Hospitals, schools, homes, office buildings, warehouses and, etc.
⚫Wireless Transmission:
Local data collection and remote transmission through NB-IoT network.
⚫Remote Management:
Remote parameter configuration, remote maintenance, and upgrade.
Temperature
Probe
10A
Socket Hole

F-TS100 User Manual
2
1.4 Product Parameters
Items
Content
Communication
Method
NB-IoT
Communication
Frequency Band
B8
Voltage
250V
Current
10A MAX
Stand-by Current
3mA @ 220V
Socket Shape
5 holes
Dimension
86*86*41mm
Protection Level
IP20

F-TS100 User Manual
3
Chapter 2 Installation Instructions
1. Use a flat-blade screwdriver to insert the card hole at the bottom of the socket to pry off
the cover easily. The card hole is as shown in the figure below.
Note: Please make sure the main power switch is closed before installation
2. On the back of the socket, connect the relevant wires according to the silk screen as
shown in the figure below
Card hole
Neutral
Wire
Earth Wire
Live Wire

F-TS100 User Manual
4
3. Use the matching screws to fix the smart temperature measurement socket with the
panel removed to the wall junction box, as shown below.
4. Cover the panel again after the installation is complete, as shown in the following figure
Screw 2
Screw 1