Four-Faith F8 26 Series User manual

F8X26 Series Router
User Manual
Product Version
Page
V2.0.0
Product Name：F8X26
Total:92
F8X26 Series Router User Manual

F8X26 Series Router User Manual
Files Revised Record
Date
Version
Remark
Author
2015-3-24
1.00
F8x26 ZigBee Router
ZZF
2017-10-10
V2.0.0
Change of company address
LXP

F8X26 Series Router User Manual
Copyright Notice
All contents in the files are protected by copyright law, and all copyrights are reserved by Xiamen
Four-Faith Communication Technology Co., Ltd. Without written permission, all commercial
use of the files from Four-Faith are forbidden, such as copy, distribute, reproduce the files, etc.,
but non-commercial purpose, downloaded or printed by individual (all files shall be not revised,
and the copyright and other proprietorship notice shall be reserved) are welcome.
Trademark Notice
Four-Faith 、 四 信 、 、 、 are all registered trademarks of Xiamen
Four-Faith Communication Technology Co., Ltd., illegal use of the name of Four-Faith,
trademarks and other marks of Four-Faith is forbidden, unless written permission is authorized in
advance.

F8X26 Series Router User Manual
Note: There may be different components and interfaces in different model,please in kind
prevail.

F8X26 Series Router User Manual
Contents
Contents
Contents
Contents...............................................................................................................................................5
Chapter 1 Brief Introduction of Product............................................................................................. 7
1.1 General............................................................................................................................... 7
1.2 Features and Benefits.........................................................................................................7
1.3 Working Principle.............................................................................................................. 9
1.4 Specifications..................................................................................................................... 9
Chapter 2 Installation Introduction................................................................................................... 14
2.1 General............................................................................................................................. 14
2.2 Encasement List............................................................................................................... 14
2.3 Installation and Cable Connection...................................................................................14
2.4 Power................................................................................................................................18
2.5 Indicator Lights Introduction........................................................................................... 18
2.6 Reset Button Introduction................................................................................................19
Chapter 3 Configuration and Management.......................................................................................20
3.1 Configuration Connection................................................................................................20
3.2 Access the Configuration Web Page................................................................................20
3.3 Management and configuration....................................................................................... 22
3.3.1 Setting...................................................................................................................... 22
3.3.1.1 Basic Setting................................................................................................. 22
3.3.1.2 Dynamic DNS...............................................................................................27
3.3.1.3 MAC Address Clone.....................................................................................28
3.3.1.4 Advanced Router...........................................................................................29
3.3.1.5 VLANs..........................................................................................................30
3.3.1.6 Networking................................................................................................... 31
3.3.2 Wireless....................................................................................................................34
3.3.2.1 Basic Settings................................................................................................34
3.3.2.2 Wireless Security.......................................................................................... 36
3.3.3 Services.................................................................................................................... 38
3.3.3.1 Services.........................................................................................................38
3.3.4 VPN..........................................................................................................................40
3.3.4.1 PPTP............................................................................................................. 40
3.3.4.2 L2TP............................................................................................................. 42
3.3.4.3 OPENVPN.................................................................................................... 43
3.3.4.4 IPSEC............................................................................................................48
3.3.4.5 GRE...............................................................................................................50
3.3.5 Security.................................................................................................................... 51
3.3.5.1 Firewall......................................................................................................... 51
3.3.6 Access Restrictions.................................................................................................. 54
3.3.6.1 WAN Access................................................................................................. 54
3.3.6.2 URL Filter..................................................................................................... 57
3.3.6.3 Packet Filter.................................................................................................. 57
3.3.7 NAT..........................................................................................................................58

F8X26 Series Router User Manual
3.3.7.1 Port Forwarding............................................................................................ 58
3.3.7.2 Port Range Forward......................................................................................59
3.3.7.3 DMZ..............................................................................................................60
3.3.8 QoS Setting.............................................................................................................. 60
3.3.8.1 Basic..............................................................................................................60
3.3.8.2 Classify......................................................................................................... 62
3.3.9 Applications............................................................................................................. 62
3.3.9.1 Serial Applications........................................................................................62
3.3.9.2 ZigBee Application.......................................................................................64
3.3.10 Administration........................................................................................................66
3.3.10.1 Management................................................................................................66
3.3.10.2 Keep Alive.................................................................................................. 68
3.3.10.3 Commands.................................................................................................. 69
3.3.10.4 Factory Defaults..........................................................................................70
3.3.10.5 Firmware Upgrade...................................................................................... 70
3.3.10.6 Backup........................................................................................................ 71
3.3.11 Status...................................................................................................................... 72
3.3.11.1 Router..........................................................................................................72
3.3.11.2 WAN............................................................................................................73
3.3.11.3 LAN.............................................................................................................76
3.3.11.4 Wireless.......................................................................................................78
3.3.11.5 Bandwidth................................................................................................... 80
3.3.11.6 Sys-Info.......................................................................................................81
Appendix A Hyperterminal Use.................................................................................................... 84
Appendix B API Accord Format.................................................................................................86
4.4.3.1 data send command.......................................................................................86
4.4.3.2 data recive command.................................................................................... 87
4.4.3.3 Set the node current operating mode............................................................ 87
4.4.3.4 OTA IO pin data acquisition......................................................................... 88
4.4.3.5 OTA Set remote node IO pin value.............................................................. 89
4.4.3.6 OTA Query MAC address............................................................................ 89
4.4.3.7 OTA Query node address..............................................................................90
4.4.3.8 OTA Query all node address and MAC address...........................................91

F8X26 Series Router User Manual
Chapter 1 Brief Introduction of Product
1.1 General
F8X26 series ROUTER is a kind of cellular terminal device that provides data transfer
function by public cellular network. Also, it supports ZigBee function.
It adopts high-powered industrial 32-bits CPU and embedded real time operating system. It
supports RS232 (or RS485/RS422), Ethernet and WIFI port that can conveniently and
transparently connect one device to a cellular network, allowing you to connect to your existing
serial, Ethernet and WIFI devices with only basic configuration. Also, it supports ZigBee function.
It has been widely used on M2M fields, such as intelligent transportation, smart grid,
industrial automation, telemetry, finance, POS, water supply, environment protection, post,
weather, and so on.
1.2 Features and Benefits
Design for Industrial Application
High-powered industrial cellular module
High-powered industrial 32bits CPU
High-powered industrial ZigBee module
Support low-consumption mode, including sleep mode, scheduled online/offline mode,
scheduled power-on/power-off mode(optional)
Housing: iron, providing IP30 protection.
Power range: DC 5~36V
Stability and Reliability
Support hardware and software WDT
Support auto recovery mechanism, including online detect, auto redial when offline to
make Router always online
Ethernet port: 1.5KV magnetic isolation protection
RS232/RS485/RS422 port: 15KV ESD protection
SIM/UIM port: 15KV ESD protection
Power port: reverse-voltage and over-voltage protection

F8X26 Series Router User Manual
Antenna port: lightning protection(optional)
Standard and Convenience
Support standard RS232(or RS485/RS422), Ethernet and WIFI port that can connect
to serial, Ethernet and WIFI devices directly
Support standard WAN port and PPPOE protocol that can connect to ADSL directly
Support intellectual mode, enter into communication state automatically when
powered
Provide management software for remote management
Support several work modes
Convenient configuration and maintenance interface(WEB or CLI)
High-performance
Support multiple WAN access methods, including static IP, DHCP, L2TP,
PPTP,PPPOE,2G/3G/4G
Support ZigBee function
Support double link backup between cellular and WAN(PPPOE, ADSL) (optional)
Support VPN client(PPTP, L2TP, OPENVPN, IPSEC and GRE)(only for VPN version)
Support VPN server(PPTP, L2TP, OPENVPN, IPSEC and GRE)(only for VPN
version)
Support local and remote firmware upgrade,import and export configure file
Support NTP, RTC embedded
Support multiple DDNS provider service
Support MAC Address clone, PPPOE Server
WIFI support 802.11b/g/n. support AP, client, Repeater, Repeater Bridge and
WDS(optional) mode
WIFI support WEP,WPA,WPA2 encryption,Support RADIUS authentication and MAC
address filter
Support multiple online trigger ways, including SMS, ring and data. Support link
disconnection when timeout
Support APN/VPDN
Support DHCP server and client, firewall, NAT, DMZ host , URL block, QOS, traffic
statistics, real time link speed statistics etc
Full protocol support , such as TCP/IP, UDP, ICMP, SMTP(optional), HTTP,
POP3(optional), OICQ(optional), TELNET, FTP(optional), SNMP, SSHD, etc
Schedule Reboot, Schedule Online and Offline,etc

F8X26 Series Router User Manual
1.3 Working Principle
The principle chart of the router is as following:
1.4 Specifications
Cellular Specification
ITEM
CONTENT
F8126 ZigBee+GPRS WIFI Router
Standard and
Band
EGSM 900/GSM 1800MHz, GSM 850/900/1800/1900MHz(optional)
Compliant to GSM phase 2/2+
GPRS class 10, class 12(optional)
Bandwidth
85.6Kbps
TX power
GSM850/900:<33dBm
GSM1800/1900:<30dBm
RX sensitivity
<-107dBm
F8226 ZigBee+CDMA WIFI Router
Standard and
Band
CDMA2000 1xRTT 800MHz, 450MHz(optional)
Bandwidth
153.6Kbps
TX power
<30dBm
RX sensitivity
<-104dBm
F8426 ZigBee+WCDMA WIFI Router
Standard and
Band
UMTS/WCDMA/HSDPA/HSUPA/HSPA+ 850/1900/2100MHz,
850/900/1900/2100MHz(optional)
GSM 850/900/1800/1900MHz
GPRS/EDGE CLASS 12
Bandwidth
DC-HSPA+: Download speed 42Mbps, Upload speed 5.76Mbps
HSPA+: Download speed 21Mbps, Upload speed 5.76Mbps
HSDPA: Download speed 7.2Mbps, HSUPA: Upload speed 5.76Mbps
Embedded processing
system
Cellular Module
Power
RS232
Indicator
lights
DATA Interface
User interface
1 ports
switch
WIFI
AP
10/100M
WAN
ZigBee Module

F8X26 Series Router User Manual
UMTS: 384Kbps
TX power
<24dBm
RX sensitivity
<-109dBm
F8626 ZigBee+EVDO WIFI Router
Standard and
Band
CDMA2000 1X EVDO Rev A 800MHz, 800/1900MHz(optional),
450MHz(optional)
CDMA2000 1X EVDO Rev B 800/1900MHz(optional)
CDMA2000 1X RTT, IS-95 A/B
Bandwidth
EVDO Rev. A: Download speed 3.1Mbps, Upload speed 1.8Mbps
EVDO Rev. B: Download speed 14.7Mbps, Upload speed 5.4Mbps
(optional)
TX power
<23dBm
RX sensitivity
<-104dBm
F8726 ZigBee+LTE/TD-SCDMA+WIFI Router
Standard and
Band
LTE TDD 2600/1900/2300MHz(Band 38/39/40), 800/1400/1800MHz(Band
27/61/62)(optional)
TD-SCDMA 2010/1900MHz(A/F frequency band, Band 34/39)
GSM /GPRS/EDGE 900/1800/1900MHz
Bandwidth
LTE TDD: Download speed 61Mbps, Upload speed 18Mbps
TD-HSPA+: Download speed 4.2Mbps, Upload speed 2.2Mbps
TD-HSPA: Download speed 2.2Mbps, Upload speed 2.2Mbps
TX power
<23dBm
RX sensitivity
<-97dBm
F8826 ZigBee+LTE/WCDMA+WIFI Router
Standard and
Band
LTE FDD 2600/2100/1800/900/800MHz, 700/1700/2100MHz(optional)
DC-HSPA+/HSPA+/HSDPA/HSUPA/UMTS 850/900/2100MHz,
800/850/1900/2100MHz(optional)
EDGE/GPRS/GSM 850/900/1800/1900MHz
GPRS CLASS 10
GPRS CLASS 12
Bandwidth
LTE FDD: Download speed 100Mbps, Upload speed 50Mbps
DC-HSPA+: Download speed 42Mbps, Upload speed 5.76Mbps
HSPA+: Download speed 21Mbps, Upload speed 5.76Mbps
HSDPA: Download speed 7.2Mbps, HSUPA: Upload speed 5.76Mbps
UMTS: 384Kbps
TX power
<23dBm
RX sensitivity
<-97dBm
F8A26 ZigBee+LTE WIFI Router
Standard and
Band
LTE FDD,LTE
TDD,EVDO,WCDMA,TD-SCDMA,CDMA1X,GPRS/EDGE
Bandwidth
LTE FDD: Download speed 100Mbps, Upload speed 50Mbps
LTE TDD: Download speed 61Mbps, Upload speed 18Mbps
DC-HSPA+: Download speed 42Mbps, Upload speed 5.76Mbps

F8X26 Series Router User Manual
TD-HSPA+: Download speed 4.2Mbps, Upload speed 2.2Mbps
EVDO Rev. A: Download speed 3.1Mbps, Upload speed 1.8Mbps
TX power
<23dBm
RX sensitivity
<-97dBm
ZigBee Specification
Item
Content
ZigBee Module
Industrial ZigBee Platform
Standard and
Band
IEEE 802.15.4
ISM 2.4~2.5 GHz
Indoor/Urban
Range
30m
90m(With PA)
Outdoor/RF
Line-of-Sight
Range
500m
2000m(With PA)
Transmit Power
2.82 mw (+4.5dBm)
100 mw (+20dBm) (With PA)
Bandwidth
250Kbps
Receiver
Sensitivity
-97dBm
-103dBm(With PA)
Network
Topologies
Point-to-Point, Point-to-Multipoint, Peer-to-Peer and Mesh
Number of
channels
16 Direct Sequence Channels
Channel
11 to 26
Max packge size
300 Bytes
WIFI Specification
Item
Content
Standard
IEEE802.11b/g/n
Bandwidth
IEEE802.11b/g: 54Mbps (max)
IEEE802.11n: 50Mbps (max)
Security
WEP, WPA, WPA2, etc
WPS (optional)
TX power
20dBm(11n),24dBm(11g),26dBm(11b)
RX sensitivity
<-72dBm@54Mpbs
Hardware System
Item
Content
CPU
Industrial 32bits CPU
FLASH
16MB(Extendable to 64MB)
DDR2
128MB

F8X26 Series Router User Manual
Interface Type
Item
Content
WAN/LAN
WAN/LAN configurable; 1 10/100 Mbps WAN port(RJ45), auto
MDI/MDIX, 1.5KV magnetic isolation protection
LAN
1 10/100 Mbps Ethernet ports(RJ45), auto MDI/MDIX, 1.5KV magnetic
isolation protection
Serial
1 RS232(or RS485/RS422) port, 15KV ESD protection
Data bits: 5, 6, 7, 8
Stop bits: 1, 1.5(optional), 2
Parity: none, even, odd, space(optional), mark(optional)
Baud rate: 2400~115200 bps
Indicator
"WAN/LAN", "LAN", "System", "WIFI", "Online", "ZigBee", "Signal
Strength", "Power"
Antenna
Cellular: Standard SMA female interface, 50 ohm
WIFI: Standard SMA male interface, 50 ohm
ZigBee: standard SMA female interface, 50 ohm
SIM/UIM
Standard 3V/1.8V user card interface, 15KV ESD protection
Power
Standard 3-PIN power jack, reverse-voltage and over-voltage protection
Reset
Restore the Router to its original factory default settings
Power Input
Item
Content
Standard Power
DC 12V/1.5A
Power Range
DC 5~36V
Consumption
Working
condition
Consumption
Schedule
shutdown
2.4~2.8mA@12DVC
F8126 ZigBee+GPRS WIFI ROUTER
Standby
149~157mA@12VDC
Communication
204~231mA@12VDC
F8226 ZigBee+CDMA WIFI ROUTER
Standby
146~205mA@12VDC

F8X26 Series Router User Manual
Communication
230~249mA@12VDC
F8426 ZigBee+WCDMA WIFI ROUTER
Standby
184~213mA@12VDC
Communication
335~442mA@12VDC
F8626 ZigBee+EVDO WIFI ROUTER
Standby
174~206mA@12VDC
Communication
324~438mA@12VDC
F8726 ZigBee+LTE/TD-SCMA WIFI ROUTER
Standby
169~182mA@12VDC
Communication
340~515mA@12VDC
F8826 ZigBee+LTE/WCDMA WIFI ROUTER
Standby
169~182mA@12VDC
Communication
340~515mA@12VDC
F8A26 ZigBee+LTE WIFI ROUTER
Standby
168~179mA@12VDC
Communication
345~524mA@12VDC
Physical Characteristics
Item
Content
Housing
Iron, providing IP30 protection
Dimensions
157x97x25 mm
Weight
440g
Environmental Limits
Item
Content
Operating
Temperature
-35~+75ºC(-31~+167℉)
Storage
Temperature
-40~+85ºC(-40~+185℉)
Operating
Humidity
95% (Non-condensing)

F8X26 Series Router User Manual
Chapter 2 Installation Introduction
2.1 General
The router must be installed correctly to make it work properly.
Warning: Forbid to install the router when powered!
2.2 Encasement List
Name
Quantity
Remark
Router host
1
Cellular antenna (Male SMA)
1
WIFI antenna (Female SMA)
1
ZigBee antenna (Female SMA)
1
Network cable
1
Console cable
1
optional
Power adapter
1
Manual CD
1
Certification card
1
Maintenance card
1
2.3 Installation and Cable Connection
Stator and routing equipment of screw specification for: M3 * 5 mm countersunk head
screws (black)
Fixed Size

F8X26 Series Router User Manual
Router Size
Note: Use M3 screw to make Router and stator fixed. The length of screw should be
3~4mm.
Installation of SIM/UIM card:
Firstly power off the Router, and press the out button of the SIM/UIM card outlet with a
needle object. Then the SIM/UIM card sheath will flick out at once. Put SIM/UIM card into
the card sheath (Pay attention to put the side which has metal point outside), and insert
card sheath back to the SIM/UIM card outlet.
Warning: Forbid to install SIM/UIM card when powered!

F8X26 Series Router User Manual
Installation of antenna:
Screw the SMA male pin of the cellular antenna to the female SMA interface of the
Router with sign “ANT”.
Screw the SMA male pin of the ZigBee antenna to the female SMA interface of the
router with sign “ZigBee”.
Screw the SMA female pin of the WIFI antenna to the male SMA interface of the
Router with sign “WIFI”.
Warning: The cellular antenna,The ZigBee antenna and the WIFI antenna can not be
connected wrongly. And the antennas must be screwed tightly, or the signal quality of
antenna will be influenced!
Installation of cable:
Insert one end of the network cable into the LAN interface , and insert the other end
into the Ethernet interface of user’s device. The signal connection of network direct cable
is as follows:
RJ45-1
RJ45-2
Line color
1
1
White/Orange
2
2
Orange
3
3
White/Green
4
4
Blue
5
5
White/Blue
6
6
Green
7
7
White/Brown
8
8
Brown

F8X26 Series Router User Manual
Installation of cable:（install it when RS232 is used）
Insert the RJ45 end of the console cable into console interface, and insert the DB9F
end of the console cable into the RS232 serial interface of user’s device.
The signal connection of the console cable is as follows:
Console line definition (RS232)
RJ45
Color
Signal
DB9F
Description
Dir (Router
1
White/
Orange
CTS
8
Clera To Send
Output
2
Orange
DSR
6
Data Set Ready
Output
3
White/
Green
RXD
2
Receive Data
Output
4
Blue
DCD
1
Data Carrier Detect
Output
5
White/
Blue
GND
5
System Ground
6
Green
TXD
3
Transmit Data
Input
7
White/
Brown
DTR
4
Data Terminal Ready
Input
8
Brown
RTS
7
Request To Send
Input

F8X26 Series Router User Manual
2.4 Power
The power range of the Router is DC 5~36V.
Warning: When we use other power, we should make sure that the power can supply
power above 8W.
We recommend user to use the standard DC 12V/1.5A power.
2.5 Indicator Lights Introduction
The Router provides following indicator lights: "WAN/LAN ", "LAN", "System", "WIFI",
" Online ", "ZigBee", "Signal Strength", "Power".
Indicator
Light
State
Introduction
Power
ON
Router is powered on

F8X26 Series Router User Manual
OFF
Router is powered off or in the shutdown period
of schedule boot&shutdown
System
BLINK
System works properly
OFF
System does not work
Online
ON
Router has logged on network
OFF
Router hasn’t logged on network
ZigBee
ON
ZigBee is active
OFF
ZigBee is not active
LAN
OFF
The corresponding interface of network is not
connected
ON / BLINK
The corresponding interface of network is
connected /Communicating
WAN/LA
N
OFF
The interface of WAN/LAN is not connected
ON / BLINK
The interface of WAN/LAN is connected
/Communicating
WIFI
OFF
WIFI is not active
ON
WIFI is active
Signal
Strength
One Light ON
Signal strength is weak(<-90dbm)
Two Lights ON
Signal strength is medium(-70dbm~-90dbm)
Three Lights
ON
Signal strength is good(>-70dbm)
2.6 Reset Button Introduction
The Router has a “Reset” button to restore it to its original factory default settings.
When user press the “Reset” button for up to 15s, the Router will restore to its original
factory default settings and restart automatically.

F8X26 Series Router User Manual
Chapter 3 Configuration and Management
This chapter describes how to configure and manage the router.
3.1 Configuration Connection
Before configuration, you should connect the router and your configuration PC with the
supplied network cable. Plug the cable’s one end into the Local Network port of the router, and
another end into your configure PC’s Ethernet port. The connection diagram is as following:
Please modify the IP address of PC as the same network segment address of the router, for
instance, 192.168.1.9. Modify the mask code of PC as 255.255.255.0 and set the default gateway
of PC as the router’s IP address (192.168.1.1).
3.2 Access the Configuration Web Page
The chapter is to present main functions of each page. Users visit page tool via web browser
after connect users' PC to the router. There are eleven main pages: Setting, Wireless, Service, VPN,
Security, Access Restrictions, NAT, QoS Setting, Applications, Management and Status. Users
enable to browse slave pages by click one main page..
Users can open IE or other explorers and enter the router's default IP address of 192.168.1.1
on address bar, then press the botton of Enter to visit page Web management tool of the router.
The users login in the web page at the first name, there will display a page shows as blow to tip
users to modify the default user name and password of the router. Users have to click "change
password" to make it work if they modify user name and password.