Four Seasons Courtyard SRFP2822 Owner's manual

1
Before returning to your retailer, call our customer
se
Email :[email protected]
rvice department at 1-866-814-0585, 8 a.m. - 8 p.m., EST, Monday - Friday.
Questions, problems, missing parts?
Item #: 227788
Model #: SRFP2822
Steel Fire Pit
Assembly Instructions & User's Manual

2
Safety Information
WARNING:
CAUTION: Assemble the firepit on a non-abrasive surface.
FOR OUTDOOR USE ONLY.
Use protective gloves and long-handled tools with this firepit.
Dispose of packaging materials properly.
Keep children away from hot firepit.
closer than 24 in. from walls during use.
This unit is designed to burn charcoal and untreated wood only. Fill the bottom of the bowl with
sand until the surface of sand is 0.2 inches below the grid.
Do not use the firepit indoors. Carbon monoxide fumes, due to lack of ventilation, can cause
death.
Do not use gasoline or kerosene to start fires in the firepit. Keep all flammable liquids away from
the firepit.
Do not use under or on combustible structures/surfaces including wooden decks.
Firepit remains very hot for a period of time after using.
Be sure firepit is cool before attempting to move it.
The handles of the tools may become hot during and after use. The firepit should be placed no
CALIFORNIA PROPOSITION 65 WARNING
This product can expose you to chemicals including carbon monoxide, which is known to the State
of California to cause birth defects or other reproductive harm. For more information,
go to www.P65Warnings.ca.gov.

Package Contents
3
A
B
C
Q
H
O
J
I
K
L
E
D
F
G
M
N
P

Part List
4
Part
Description
Quantity
A
1 pc
1 pc
3 pcs
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
B
C
D
E
F
G
H
Part Description
Quantity
I
1 pc
1 pc
2 pcs
1 pc
1 pc
2 pcs
1 pc
4 pcs
J
K
L
M
N
O
P
Q
Tools Required (Not included):
Adjustable open end wrench
Screwdriver
1
2
Please check the contents of the packaging to ensure all parts are included.
Hardware List
Part
AA
BB
CC
DD
EE
FF
GG
HH
JJ
II
Picture Quantity
2 pcs
23 pcs
2 pcs
2 pcs
8 pcs
13 pcs
6 pcs
2 pcs
1 pc
2 pcs
Chimney cap
Top bowl
Screen
Doorframe
Slide rail
Sliding door
Charcoal grid
Bottom bowl
Left leg tube
Right leg tube
Axle
Wheel
Handle
U tube
Fixing plate
Poker
Vertical bracket
Description
M6 x 40 bolt
M6 nut
M8 stop nut
M6 x 15 bolt
M6 x 12 bolt
D16 washer
M5 nut
M5x 10 bolt
Paper washer
D10 x 33 pin bush

Assembly Instructions
5
22
Fix two wheels (L) into axle (K) with (2)
D10 x 33 pin bushes (CC) and (2) M8
stop nuts (DD).
11
Connect U tube (N) to left leg tube (I)
and right leg tube (J) with (2)
M6 x 40 bolts (AA) and (2) M6 nuts (BB).
Then take axle (K) through into
two holes of leg tubes assembly.
Hardware Used
CC x 2
D10 x 33 pin bush
DD x 2
M8 stop nut
Hardware Used
AA x 2
M6 x 40 bolt
BB x 2
M6 nut
Choose a level location for assembly. Remove all parts from the packaging, and check for
missing parts.
I
J
K
N
AA
BB
L
K
DD
CC

6
44
Attach handle (M) to the bottom
bowl (H) with (2) M6 x 12 bolts (FF),
(2) D16 washers (GG), (2) paper
washers (JJ), (2) D16 washers (GG)
and (2) M6 nuts (BB).
3
Hardware Used
Hardware Used
BB x 4
M6 nut
Choose a level location for assembly. Remove all parts from the packaging, and check for
missing parts.
BB x 4
M6 nut
BB x 4
M6 x 15 bolt
EE x 4
BB x 2
M6 nut
BB
x4
D16 washer
GG
x 2
M6 x 12 bolt
FF
x 2
Paper washer
JJ
H
O
EE
BB
GG
BB
JJ
GG
FF
M
H
3
Attach the bottom bowl (H) to legs
assembly with (4) M6 x 15 bolts (EE),
(2) fixing plates (O) and (4) M6
nuts (BB).
Assembly Instructions

7
66
Connect two screens (C) with (1) vertical
bracket (Q), (4) M6 x 12 bolts (FF) and
(4) M6 nuts (BB).
55
Place charcoal grid (G) into bottom bowl (H).
Hardware Used
FF x 4
M6 x 12 bolt
BB x 4
M6 nut
Choose a level location for assembly. Remove all parts from the packaging, and check for
missing parts.
G
H
C
Q
BB
C
FF
Assembly Instructions

8
88
Connect screen assembly, doorframe
assembly and slide rail (E) with (4)
M6 x 15 bolts (EE) and (4) M6 x12 bolts (FF)
and (8) M6 nuts (BB).
77
Connect doorframe (D) and another screen
(C) with (1) vertical bracket (Q), (3)
M6 x 12 bolts (FF) and (3) M6 nuts (BB).
Then attach slide rail (E) to upper-left hole
on screen (C) and upper-right hole on
vertical bracket (Q) with (1) M5x 10 bolt (II)
as illustrated.
Hardware Used
x 3
x 1
FF
M6 x 12 bolt
II
M5x 10 bolt
BB x 3
M6 nut
Choose a level location for assembly. Remove all parts from the packaging, and check for
missing parts.
Hardware Used
FF x 4
M6 x 12 bolt
BB x 8
M6 nut
EE x 4
M6 x 15 bolt
Q
E
FF
FF
BB
C
BB
II
D
BB
EE
BB
FF
EE
BB
FF
BB
Assembly Instructions

9
10 10
Hang the sliding door (F) onto slide rail (E)
of screen assembly.
99
Settle screen assembly into bottom
bowl (H).
Choose a level location for assembly. Remove all parts from the packaging, and check for
missing parts.
H
F
E
Assembly Instructions

10
12 12
Place top bowl assembly onto screen
assembly. Clip bracket into slot on the
top bowl edge.
11 11
Fix chimney cap (A) onto top bowl (B)
with (2) pre-assembled bolts, (2) D16
washers (GG) and (2) M5 nuts (HH).
Choose a level location for assembly. Remove all parts from the packaging, and check for
missing parts.
Hardware Used
GG x 2
D16 washer
HH x 2
M5 nut
B
HH
GG
A
B
P
C
Assembly Instructions