Frama F-Cabinet User manual

ASSEMBLY GUIDE
F-Cabinet
6× SCREW + WALL ANCHOR
* ensure appropirate for wall
1×F-CABINET
16×SPACERS2×WALL CLEATS
SCREWDRIVERLEVEL
In this box you will find:
1×F-cabinet, 2 ×wall cleats, 16× Spacers, 6 ×Screws, 6 wall anchors
Necessary Tools: Screwdriver, Level
FRAMA
Fredericiagade 57, 1310 Copenhagen K
[phone] framacph.com

1. Remove F-Cabinet and its two wall cleats from packaging, if larger cabinet
remove interior shelves.
2. Place wall cleats on the wall in desired position, ensure with a leveler they
are mounted in a straight horizontal angle. Take care to use the proper wall
anchors, and drill the two cleats to the wall.
4. (Large cabinet) Using the interior holes placed on the sides of the F-Cabinet,
place four spacers with the with the washer facing within the interior side.
Place shelf atop.
5. If placing multiple F-Cabinets in an arrangement, use spacers to stack the
cabinets. Place the four spacers on top of the first mounted cabinet before
properly wall mounting the next cabinet on top.
3.a. Place the backside of F-Cabinet with opposite facing wall cleats on the newly
mounted wall cleats.
NOTE: Customer can choose if the cabinet opens left or right, as attached
cleats are double sided on cabinet.
3.b. Lift the cabinet up and down on to the cleats, so that they lock into place.
2.a. 2.b.
1.
SIDE VIEW MOUNTED