Frama F56 Trestles User manual

ASSEMBLY GUIDE
F56Trestles
Screws Hex key
Hex screws
FRAMA
Fredericiagade 57, 1310 Copenhagen K
[phone] framacph.com
In this box you will find:
8× Steel legs, 2 ×Wooden crossbars, 2 × Steel top brackets, 8 × Top screws for top
bracket, 12 xBolts and washers for legs, 1 x Hex key, 2 x adhesive feltspacers

F56 TRESTLES TABLE
1. Start by screwing the longest screws through the three layers of two steel
legs and the wooden centerpiece. For an easy assembly, balance the trestle
against a sturdy object until both trestles are secure and optimal stability is
achieved.
3. Fasten the top bracket using the smaller screws according to the hole marks.
B screws are optional and can be used if desired.
A screws are the primary screws used to fasten the top.
4. To assemble the tabletop, place each plank above the metal bracket. To
keep a slight gap between planks, glue two provided adhesive felt spacers in
between.
2. Tighten the bolt when the steel trestle is flush with the wood crossbar.
Repeat on the second trestle.
B B
A A
Fasten B screws, by drilling
directly into the tabletop