Frama FARMHOUSE User manual

FARMHOUSE DINING TABLE
- ASSEMBLY GUIDE -
Square l Round l Pond

- PARTS -
B
ATabletop x1
Metal plate x1
Attn.Remove plate from tabletop
before assembly
C
D
E F
H I
G
Trestle section x2
Trestle section x2
Adjustable feet x6 Flathead screws x12
Dowels x8 Allen key x1
Flathead screws x4

4.
Flip table around.

1.
Start by placing the trestle section Dperpendicularly to part C.
Attach the two sections by inserting and securing the dowels Hin the pre-
drilled holes. Then fasten with the screws Gusing the allen key I.
Use the adjustable feet E, if needed, by screwing them on the pre-drilled holes
underneath the trestles.

2.
Mount the metal plate Bto the trestles.
Fasten it with screws Fusing the allen key I.

3.
Mount the trestle upside down with attached metal plate Bto the tabletop A.
Fasten metal plate Bto the tabletop with screws Fusing the allen key I.

For material care and maintenance instructions, scan
the QR code using your mobile device.
In order to preserve your new FRAMA pieces for years to come, we’ve
produced a guide on the materials we use and how to best care
for them. Following these instructions will help to maintain the
appearance and quality of your items after repeated use and cleaning.
- MATERIAL & CARE GUIDE -
Access the guide on your desktop at
framacph.com/pages/material-care-guide

FRAMA
Fredericiagade 57, 1310
Copenhagen K
[phone] framacph.com