Franklin CET-180 User manual

CET-180
Quick Start Guide
www.franklin.com


Icons
AA.M.
PP.M.
DDaylight Savings Time on
Home Time
orld Time
#Home City
Alarm on
Translator mode
Phrase mode; cross-reference available
Speech data available
Key tone on
Low battery indicator
Direction to scroll
Getting Started
1. Remove the battery insulation tab at the back of the
unit.
2. Press MODE/ON to turn the unit on.
3. Use a thin pointed object to press the Reset button located
inside the battery compartment.
The message “Reset? Yes/No” appears.
4. Rotate the RS to see “Yes” and press ENTER to select
it.
Home Time is displayed.
Note: Reset the unit each time you change the batteries.
Select “No” to reset your unit without losing data. If you get
a “Memory Error” message, then reset the unit again and
select “Yes.” hen you select “Yes” any entered data will
be lost.
RESET
CET-180
Key Guide
/ Scrolls through the word and phrase
lists, selects fields in Home Time mode.
cycles through the lookup lan-
guages. cycles through the target
languages.
ENTER Confirms an action, selects letters and
shows translation of phrases.
ESC Clears entries, cancels an operation, or
goes up one level in category selection.
Activated DST.
MODE/ON Turns the unit on. Cycles through the
available operational modes.
RS (Rotary S itch) Scrolls through let-
ters, word and phrase lists, categories
and fields. hen pushed, confirms a
selection.
TALK Speaks a phrase in the displayed lan-
guage.

Setting Date and Time
1. Press MODE/ON to turn the unit on.
2. Continue pressing MODE/ON or rotate the RS until
the time and date are displayed.
3. Press
/
to scroll through the list of available
cities.
4. hen the city you want is displayed, press ENTER to
select it as your Home City.
5. Press and hold ESC for two seconds until the year
field blinks.
6. Rotate the RS to change the year.
7. Use
/
to move to the month, day, hour and
minute fields.
8. Rotate the RS to change the number in each field.
9. Press ENTER to confirm the date and time changes.
To exit without saving your changes, press MODE/ON.
Changing the Settings
1. Press MODE/ON to turn the unit on.
2. Continue pressing MODE/ON or rotate the RS until
the Setup screen is displayed.
3. Press ENTER.
4. Press / to cycle between Language,
Contrast, and Volume and press ENTER to select
the one you want.
Language enables you to select English, Français,
Deutsche, Italiano or Español as the message lan-
guage. The message language is the language of
the menu prompts and screen messages. This
becomes your default lookup language until you
change it.
Note: All translations are made from a lookup lan-
guage to a target language. You can set both at the
“ ORD” or “PHRASE” screens.
Contrast enables you to set how light or dark the
screen is.
Volume enables you to select low or high as the vol-
ume of the spoken phrases.
5. Press / or rotate the RS to scroll to the set-
ting you want.
6. Press ENTER to confirm the settings.
Note: There is no OFF key. The unit turns itself off when
there is no activity for approximately three minutes.
Using the Translator
1. Press MODE/ON to turn the unit on.
2. Continue pressing MODE/ON until “ ORD” or
“PHRASE” is displayed.
3. Press
/ to cycle through the lookup/target
languages. Stop when you see the ones you want.
4. To start searching for a word or a phrase in the lookup
language, press ENTER or the RS.
The letter Ais displayed for words and the first catego-
ry is displayed for phrases.
5. Rotate the RS to scroll through the letters or cate-
gories and press ENTER or the RS to select the one
you want.
6. Repeat the above step for a second letter.
The first word starting with the letters you entered is
displayed.
7. Repeat Step 5 for a sub-category of phrases.
8. Rotate the RS to scroll through the list of matching
words or list of phrases.
9. Press ENTER to see the translation of a phrase in the
target language.
The translation of a word appears on the same screen
as the word. indicates the word on the screen is
included in one or more phrases.
Press ENTER to see the phrase in the lookup lan-
guage. Press ENTER again to see the translation in the
target language. indicates speech data is available.
Press TALK to hear the phrase.
To save the word or phrase on the screen to user memory,
press and hold ESC for about 3 seconds. To view the
words in user memory, press MODE/ON until you see
“ ORD” or “PHRASE”, and press ENTER. Rotate the RS
until you see “User Memory” and press ENTER. Then
rotate the RS to see your list of words or phrases. To
delete a saved word or phrase, press and hold ESC for
about 3 seconds when it is on the screen.

Replacing the Batteries
This unit uses two AAA batteries. Replace the batteries
when the low battery indicator lights up. Batteries must be
replaced within one minute or all user-entered data will be
lost.
hen the batteries are low, the talking function is dis-
abled, and the following message is displayed: BATTERY
LO !
Use only fresh batteries as specified in these instructions.
Do not mix new and old batteries as the old ones may
leak.
WARNING: Make sure the unit is off before replacing the
batteries. Replacing batteries when the unit is on may
cause permanent damage.
1. Make sure the unit is off and turn it over.
2. Slide the cover off in the direction of the arrow.
3. Remove the old batteries and install two AAAbatteries fol-
lowing the markings in the compartment.
4. Slide the cover back on.
Warning! This device stores your information as long as
the batteries supply power. If the batteries lose power or
are removed, all your information will be lost. Always keep
written copies of your important information in case it is
corrupted or lost.
Specifications
• Model: CET-180
• Size: 88 X 58 X 19.8 mm • eight: 85 g
• Battery: 2 x AAA
ISBN: 1-59074-208-7
Cleaning this Product
To clean this product, spray a mild glass cleaner onto
a cloth and wipe its surface. Don’t spray liquids direct-
ly onto the unit. Don’t use or store your organizer in
extreme or prolonged heat, cold, humidity, or other
adverse conditions.
FOR HOME OR OFFICE USE
FCC Tested to comply with FCC Standards
Copyrights and Trademarks
© 2003 Franklin Electronic Publishers, Inc., Burlington,
N.J. 08016-4907 USA. All rights reserved.
CAUTIONS
• Do not immerse the unit in water.
• Do not clean the unit with abrasive or corrosive
materials.
• Do not subject the unit to excessive force, shock,
dust, temperature or humidity.
• Do not tamper with the unit's internal components.
Doing so will invalidate the warranty on the unit and
may cause unnecessary damage.
License Agreement
READ THIS LICENSE AGREEMENT BEFORE USING THE
ELECTRONIC REFERENCE. YOUR USE OF THE ELEC-
TRONIC REFERENCE DEEMS THAT YOU ACCEPT THE
TERMS OF THIS LICENSE. IF YOU DO NOT AGREE ITH
THESE TERMS, YOU MAY RETURN THIS PACKAGE ITH
PURCHASE RECEIPT TO THE DEALER FROM HICH
YOU PURCHASED THE ELECTRONIC REFERENCE AND
YOUR PURCHASE PRICE ILL BE REFUNDED. ELEC-
TRONIC REFERENCE means the software product and doc-
umentation found in this package and FRANKLIN means
Franklin Electronic Publishers, Inc.
Limited Use License
All rights in the ELECTRONIC REFERENCE remain the
property of FRANKLIN. Through your purchase, FRANKLIN
grants you a personal and nonexclusive licensed to use
this ELECTRONIC REFERENCE. You may not make any
copies of the ELECTRONIC REFERENCE or of the data
stored therein, whether in electronic or print format. Such
copying would be in violation of applicable copyright laws.
Further, you may not modify, adapt, disassemble, decom-
pile, translate, create derivative works of, or in any way
reverse engineer the ELECTRONIC REFERENCE. You
may not export or reexport, directly or indirectly, the ELEC-
TRONIC REFERENCE without compliance with appropri-
ate governmental regulations. The ELECTRONIC REFER-
ENCE contains Franklin’s confidential and proprietary infor-
mation which you agree to take adequate steps to protect
from unauthorized disclosure or use. This license is effec-
tive until terminated. This license terminates immediately
without notice from FRANKLIN if you fail to comply with
any provision of this license.
This unit may change operating modes due to
Electro-static Discharge. Normal operation of
this unit can be re-established by pressing the
reset key, MODE/ON or by removing/replacing
batteries.

Limited Warranty (U.S. only)
LIMITED ARRANTY, DISCLAIMER OF ARRANTIES
AND LIMITED REMEDY
(A) LIMITED ARRANTY. FRANKLIN ARRANTS TO
THE ORIGINAL END USER THAT FOR A PERIOD OF
ONE (1) YEAR FROM THE ORIGINAL DATE OF PUR-
CHASE AS EVIDENCED BY A COPY OF YOUR RECEIPT,
YOUR FRANKLIN PRODUCT SHALL BE FREE FROM
DEFECTS IN MATERIALS AND ORKMANSHIP. THIS
LIMITED ARRANTY DOES NOT INCLUDE DAMAGE
DUE TO ACTS OF GOD, ACCIDENT, MISUSE, ABUSE,
NEGLIGENCE, MODIFICATION, UNSUITABLE ENVIRON-
MENT OR IMPROPER MAINTENANCE. THE SOLE
OBLIGATION AND LIABILITY OF FRANKLIN, AND YOUR
EXCLUSIVE REMEDY UNDER THIS LIMITED ARRAN-
TY, ILL BE REPAIR OR REPLACEMENT ITH THE
SAME OR AN EQUIVALENT PRODUCT OF THE DEFEC-
TIVE PORTION OF THE PRODUCT, AT THE SOLE
OPTION OF FRANKLIN IF IT DETERMINES THAT THE
PRODUCT AS DEFECTIVE AND THE DEFECTS AROSE
ITHIN THE DURATION OF THE LIMITED ARRANTY.
THIS REMEDY IS YOUR EXCLUSIVE REMEDY FOR
BREACH OF THIS ARRANTY. THIS ARRANTY GIVES
YOU CERTAIN RIGHTS; YOU MAY ALSO HAVE OTHER
LEGISLATED RIGHTS THAT MAY VARY FROM JURISDIC-
TION TO JURISDICTION.
(B) DISCLAIMER OF ARRANTIES AND LIMITATION OF
LIABILITY. EXCEPT FOR THE LIMITED ARRANTIES
EXPRESSLY RECITED ABOVE, THIS FRANKLIN IS PRO-
VIDED ON AN “AS IS” BASIS, ITHOUT ANY OTHER
ARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, ARRANTIES OF
MERCHANTABLE QUALITY, MERCHANTABILITY OR FIT-
NESS FOR A PARTICULAR PURPOSE, OR THOSE ARIS-
ING BY LA , STATUTE, USAGE OF TRADE, OR COURSE
OF DEALING. THIS ARRANTY APPLIES ONLY TO
PRODUCTS MANUFACTURED BY FRANKLIN AND DOES
NOT INCLUDE BATTERIES, CORROSION OF BATTERY
CONTACTS OR ANY OTHER DAMAGE CAUSED BY
BATTERIES. NEITHER FRANKLIN NOR OUR DEALERS
OR SUPPLIERS SHALL HAVE ANY LIABILITY TO YOU
OR ANY OTHER PERSON OR ENTITY FOR ANY INDI-
RECT, INCIDENTAL, SPECIAL, OR CONSEQUENTIAL
DAMAGES HATSOEVER, INCLUDING, BUT NOT LIM-
ITED TO, LOSS OF REVENUE OR PROFIT, LOST OR
DAMAGED DATA OR OTHER COMMERCIAL OR ECO-
NOMIC LOSS, EVEN IF E HAVE BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES, OR THEY ARE
OTHER ISE FORESEEABLE. E ARE ALSO NOT
RESPONSIBLE FOR CLAIMS BY ATHIRD PARTY. OUR
MAXIMUM AGGREGATE LIABILITY TO YOU, AND THAT
OF OUR DEALERS AND SUPPLIERS, SHALL NOT
EXCEED THE AMOUNT PAID BY YOU FOR THE
FRANKLIN PRODUCT AS EVIDENCED BY YOUR PUR-
CHASE RECEIPT. YOU ACKNO LEDGE THAT THIS IS
A REASONABLE ALLOCATION OF RISK. SOME
STATES/COUNTRIES DO NOT ALLO THE EXCLU-
SION OR LIMITATION OF LIABILITY FOR CONSE-
QUENTIAL OR INCIDENTAL DAMAGES, SO THE
ABOVE LIMITATION MAY NOT APPLY TO YOU. IF THE
LA S OF THE RELEVANT JURISDICTION DO NOT
PERMIT FULL AIVER OF IMPLIED ARRANTIES,
THEN THE DURATION OF IMPLIED ARRANTIES AND
CONDITIONS ARE LIMITED TO THE DURATION OF
THE EXPRESS ARRANTY GRANTED HEREIN.
(C) WARRANTY SERVICE: UPON DISCOVERING A DEFECT,
YOU MUST CALL FRANKLIN’S CUSTOMER SERVICE DESK,
1-800-266-5626, TO REQUEST ARETURN MERCHANDISE
AUTHORIZATION (“RMA”) NUMBER, BEFORE RETURNING
THE PRODUCT (TRANSPORTATION CHARGES PREPAID)
TO:
FRANKLIN ELECTRONIC PUBLISHERS, INC.
ATTN: SERVICE DEPARTMENT
ONE FRANKLIN PLAZA
BURLINGTON, NJ 08016-4907
IF YOU RETURN A FRANKLIN PRODUCT, PLEASE
INCLUDE A NOTE ITH THE RMA, YOUR NAME,
ADDRESS, TELEPHONE NUMBER, A BRIEF DESCRIPTION
OF THE DEFECTAND A COPY OF YOUR SALES RECEIPT
AS PROOF OF YOUR ORIGINAL DATE OF PURCHASE. YOU
MUST ALSO RITE THE RMA PROMINENTLY ON THE PACK-
AGE IF YOU RETURN THE PRODUCT, OTHER ISE THERE
MAY BE A LENGTHY DELAY IN THE PROCESSING OF YOUR
RETURN. E STRONGLY RECOMMEND USING A TRACK-
ABLE FORM OF DELIVERY TO FRANKLIN FOR YOUR
RETURN.

Limited Warranty (EU and
S itzerland)
This product, excluding batteries and liquid crystal display
(LCD), is guaranteed by Franklin for a period of two years
from the date of purchase. It will be repaired or replaced
with an equivalent product (at Franklin’s option) free of
charge for any defect due to faulty workmanship or materi-
als.
Products purchased outside the European Union and
Switzerland that are returned under warranty should be
returned to the original vendor with proof of purchase and
description of fault. Charges will be made for all repairs
unless valid proof of purchase is provided.
This warranty explicitly excludes defects due to misuse,
accidental damage, or wear and tear. This guarantee does
not affect the consumer’s statutory rights.
Limited Warranty (outside U.S.,
EU and S itzerland)
This product, excluding batteries and liquid crystal display
(LCD), is guaranteed by Franklin for a period of one year
from the date of purchase. It will be repaired or replaced
with an equivalent product (at Franklin’s option) free of
charge for any defect due to faulty workmanship or materi-
als.
Products purchased outside the United States, the
European Union and Switzerland that are returned under
warranty should be returned to the original vendor with
proof of purchase and description of fault. Charges will be
made for all repairs unless valid proof of purchase is pro-
vided.
This warranty explicitly excludes defects due to misuse,
accidental damage, or wear and tear. This guarantee does
not affect the consumer’s statutory rights.
FCC Notice
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) This
device must accept any interference received, including
interference that may cause undesired operation.
arning: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to com-
ply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to pro-
vide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harm-
ful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interfer-
ence to radio or television reception, which can be deter-
mined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and
receiver.
–Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician
for help.
NOTE: This unit was tested with shielded cables on the
peripheral devices. Shielded cables must be used with the
unit to insure compliance.
NOTE: The manufacturer is not responsible for any radio or
TV interference caused by unauthorized modifications to
this equipment. Such modifications could void the user’s
authority to operate the equipment. IST-28500-00 A
Rev. A