Remove screws and insert 4 Alkaline “C” size batteries
(not included).
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc), or rechargeable
(nickel-cadmium) batteries.
6)
Insert and twist the top and bottom of the adjustable tee/ball
feeder onto the top of the motor to secure.
4)
Place the cover over the plug. Screw tightly into place with
two screws.
Insert the battery plug into the socket in the chute.
Note: If you cannot find the socket in the peg, the motor is
positioned backwards on the base. Remove the motor and turn
it around.
3)
Holding the motor at an angle, insert
into the base as pictured.
2)1)
Turn unit on to play.
8)
7)
Insert balls into feeder.
5
)
Snap the 2 pieces together, insert the tee, then screw together.
ALKALINE
C
PILES ALCALINES
ALKALINE
C
PILES ALCALINES
ALKALINE
C
PILES ALCALINES
ALKALINE
C
PILES ALCALINES
Remove screws and
slide door to open
BATTERY INSTALLATION:
Insert batteries into base unit as shown.
